h22 build with new Kiddracing header

[h22 jones]

I finaly finished my h22 build so i figured i would put some pictures up to promote the new kiddracing header so tell me what you think. I had to notch my cross member and trim the front bracket for the motor mount just a little but other than that it fits great. I installed a rmf header a couple of years for accordm3 and it broke in three places on the way to macon. The steel and construction of this header seems to be alot better i will let you guys know how it holds up.
http://i71.photobucket.com/albums/i160/michaeldalej/117.jpg
http://i71.photobucket.com/albums/i160/michaeldalej/118.jpg
http://i71.photobucket.com/albums/i160/michaeldalej/111.jpg
http://i71.photobucket.com/albums/i160/michaeldalej/109.jpg

[ACCORDPRIDE]

looks good bro
h22 ftw

[Sir_Christopher]

i want more! keep this thread going!

[h22 jones]

Thanks im going to get my exaust finished tomorrow then drive it a little to brake it in and i will let you know how it runs . Im trying to line up getting it tunned so i will post dyno numbers after i do.

[ATK_Designs]

nice, btw, we need bigger pics.

[Humphrizzle]

pics are smalllllllll... nice header.

[boosted b]

looks good

[PawnShopCEO]

engine bay looking great. Bigger pictures are a must

[Vteckidd]

pics edited so they are now bigger

[The BUCKY]

that engine bay has alot of potential with some tucking

[Vteckidd]

This kinda shows the accord guys how much they have to trim their crossmember, not too bad about like an EF

Looking good Mike Jawnz, get her running so we can tune it

[Sir_Christopher]

This kinda shows the accord guys how much they have to trim their crossmember, not too bad about like an EF

Looking good Mike Jawnz, get her running so we can tune it

all you need is a traction bar! haha

all i need is my axles and rywire harness and im getting these headers!!

[CB7tuner]

holy crap i have a lot of crossmember triming to do i think im going to box in my cutout portion though. i wish my header would hurry up and get here

[h22 jones]

I realy dont think it needs it but i know were ten more cross memebers are so i will box in one just to be on the safe side. I did bend the metal i cut back into the cross member and weilded it . It is just hard to see in the pictures.


golden eagle sleeved block
crower rods
type s pistons
skunk two stage two cams
skunk two intake manifold
kid racing header
skunk two cam gears
h23 crank
a few more little goodies here and there

[.blank cd]

Looks great, id like to see the numbers. But i dunno if i wanna notch my crossmember out that much tho. hmmm

[Sir_Christopher]

Looks great, id like to see the numbers. But i dunno if i wanna notch my crossmember out that much tho. hmmm


why dont you just get a traction bar?

[Vteckidd]

I do have prelude specific headers, and an accord that is based off the Tri-Y style. They are about to be released.

H22 Jones just wanted to test fit this header in an accord and post the results.

Now the trimming of the crossmember is about the same as an EF, so structual wise its fine, i wouldnt be worried about it failing or anything like that.

[DarKStaR]

About time Mike, call me after you get it tuned and let me know what it makes!

[.blank cd]

I do have prelude specific headers, and an accord that is based off the Tri-Y style. They are about to be released.Does this mean direct fit to Accord? I may be more interested in this. Im just against chopping up the car. traction bar or not

[Vteckidd]

Does this mean direct fit to Accord? I may be more interested in this. Im just against chopping up the car. traction bar or not
check the thread i just posted, popular Tri-y headers no available for H22 in Accord an Prelude

[.blank cd]

checked

[h22 jones]

I got my flange weilded on my exuast and drove it a little today runs good but bust up when it goes into vtec not sure why. I wil pull the computer out of the f20b hatch tomorrow and try it . Call me mike so we can set up a tunning date i think thats all it needs.

[ballistic08]

thats a mean lookin header, props to mike

[K24cb7coupe]

there is a company called http://www.explicitspeedperformance.net/TBS.html sell front lower crossmember and traction bars. check it out!

[ATK_Designs]

^Interesting, very interesting.

[K24cb7coupe]

they make some good shit for honda's

[.blank cd]

they make some good shit for honda'sWill, I guess you didnt hear what i said....


Does this mean direct fit to Accord? I may be more interested in this. Im just against chopping up the car. traction bar or not
:ninja:

[yunglaosta]

damn shit looks nice. u feel any huge difference in power?

[PawnShopCEO]

damn shit looks nice. u feel any huge difference in power?


he just put this motor in. hard to tell... however.. we ARE going to dyno it vs stock header/dc sports

[yunglaosta]

he just put this motor in. hard to tell... however.. we ARE going to dyno it vs stock header/dc sports

oic well cant wait to see the numbers!

[Jimmy B]

hm, when i had my h22 in the accord, there was no trimming of my crossmember..

[h22 jones]

Then you did not have this header sir. I painted my dads f20b si hatch today so i did not have time to mess with my car but ill try to get everything right tomorrow and take some more pictures.

[Sir_Christopher]

i can agree with explicit speed performance, thats who i got all my parts from!! wwonderful people, and questions about an h22 swap or anyhing with an h22, just ask for John, pm me if you want his number!! and there amazing people!

[Civic_94]

Nice Clean Car

[h22 jones]

Thanks it looks a little different that picture was three years ago i will try to take some new ones today.

[SL65AMG]

holy DAMN that was a lot of cutting. is that shit not gonna break/bend???

[Jimmy B]

no, i had a DC header.. the header had to be cut and a new o ring put on to mount my exaust, but thats it..

[K24cb7coupe]

Will, I guess you didnt hear what i said....


:ninja:

i heard what you said, i just didnt say anthing

[FasTech]

h22 jones, You live in Macon? I've seen that car somewhere.

[DarKStaR]

Yea he does fast, his shop is off of old columbus road in lizella

[FasTech]

Yea he does fast, his shop is off of old columbus road in lizella


I was pretty sure I have seen it.

[Z0_o6]

bout time he got that car back together. glad to hear your dad has the hatch running mike. sorry bout welding that mount back on the frame rail i know it made it a pain in the ass to go back F-series.

[h22 jones]

Not realy just sucks to have a freshly painted engine bay with a spray painted black mount but i will fix it. I finished putting it back together today from painting it man that things clean you need to come by and look at it hopefuly i will get all the bugs out of my car tomorrow.

[BB1_Luda]

Good lookin header.

thats a big chunk out of that crossmember.

[importtoy103]

dont buy shit from him he likes little boys. he is a petifile his full name is michael dale jones an hes a convicted sex affender

[secondgencamaro]

http://i71.photobucket.com/albums/i160/michaeldalej/109.jpg

I would box that in.

[89MX6GT]

any one lookin to buy a SAFC Neo by Apex-i? $300 brand new i paid $400 for it....

[Slomaro Z28]

any one lookin to buy a SAFC Neo by Apex-i? $300 brand new i paid $400 for it....

wrong section and in someone elses thread.....plus I dont think you can sell stuff here yet.

[h22 jones]

http://i71.photobucket.com/albums/i160/michaeldalej/michaelsdyno.jpg