Integra exhaust and parts; itr pistons, ls crank

[mitch lab]

http://img.photobucket.com/albums/v479/mp82/pit.jpg
http://img.photobucket.com/albums/v479/mp82/pit2.jpg
http://img.photobucket.com/albums/v479/mp82/pit3.jpg
Brand new pit exhaust for 94-99 Acura gsr Integra. But will work on ls model too. Just gotta extend the pipes. This is going for $494 plus tax it came out to $544. I will let it go $350 shipped. Pickup $300


http://img.photobucket.com/albums/v479/mp82/lshead.jpg
Couple of Ls heads each $75 shipped or $50 pickup

http://img.photobucket.com/albums/v479/mp82/itr1.jpg
http://img.photobucket.com/albums/v479/mp82/itr.jpg
used .20 over Integra type r pistons $75 one skirt has minor piston slap mark. Back on sale

http://img.photobucket.com/albums/v479/mp82/crank-1.jpg
B18a crank: $100 no scar mark

http://img.photobucket.com/albums/v479/mp82/02sensorextensionharness.jpg
4 wires O2 sensor extension harness: (When you installed a header and your o2 sensor is relocated to the down pipe, then you realize the harness is too short. So instead of splicing the o2 sensor why not just buy this harness, make it easy for yourself. All you have to do is PLUG and PLAY) Made by M.T.Autoworks LLC :goodjob: $25

[Jdm94Coupe]

good guy here..... good luck homie....

[whizkid]

GLWS

[b16hatchj]

glws bump for a good guy

[Pickleteg]

Free bump for NonVtec.com!!!!!

[mitch lab]

thanks everyone for the bump
to pickleteg NonVtec Buddy!!!

[mitch lab]

bump

[mitch lab]

bump

[mitch lab]

bump

[mitch lab]

bump

[mitch lab]

up

[Ferio4ya]

good stuff bump

[southside]

up

[mitch lab]

thanks for the bump

[mitch lab]

bump

[mitch lab]

bump

[mitch lab]

bump

[mitch lab]

bump

[FRYLOCK]

ill give u 50 for the exhuast thats it

[mitch lab]

add $300 more and it's yours

:screwy:

[AV8ter]

Biggest lowball EVER!!!!!!

Exhaust looks nice, I would pick it up right now if it was for an LS.


Kevin

[99jdmLs]

U have a pm

[mitch lab]

U have a pm
check your pm'd

[mitch lab]

Biggest lowball EVER!!!!!!

Exhaust looks nice, I would pick it up right now if it was for an LS.


Kevin

You can extend the pipe to make it work.

[AV8ter]

I'm not into fab lol.

[mitch lab]

it's koo, I fab alot.

[nightrider]

will the sensor work on ls non vtec

[southside]

O2 extension is pretty tempting I know imma need it

[mitch lab]

will the sensor work on ls non vtec

Well it's not a sensor, it's a o2 sensor extension harness. It will work for civic and integra, but this is for a 4 wire o2 sensor. I can also make it for pre obd model.

[mitch lab]

bump

[southside]

everytime I turn around yall make something new LOL

[mitch lab]

cause we good..lol tryna keep some in stock.

[mitch lab]

bump

[southside]

cause we good..lol tryna keep some in stock.Well go ahead and mass produce it so WE can be Rich!:lmfao:

[mitch lab]

lol I'm the only one at the shop producing these,dizzy harness, and vtec sub harness.

[southside]

lol I'm the only one at the shop producing these,dizzy harness, and vtec sub harness.True but you gotta remember its M.T Autoworks :goodjob: Just gotta do like I do tell Mitch at M.T Autoworks does it.:D

[mitch lab]

lol yes I know. You might want to come to the shop Tomorrow. I made something that no one has yet.

[southside]

lol yes I know. You might want to come to the shop Tomorrow. I made something that no one has yet.:lmfao: See everytime never seems to fail.Ill slide through tomorrow

[mitch lab]

ok koo.

[J-ROCK]

hey man would you take 50 for the pistons??? lmk

[mitch lab]

hey man would you take 50 for the pistons??? lmk

got pm'd

[J-ROCK]

got pm'd

replied!!! thanks

[mitch lab]

bump

[mitch lab]

bump

[southside]

bump

[wanggsticky]

very nice

[mitch lab]

morning bump

[JDM onlyy]

ahhh hey did chan tell u what i needed for my car?

[mitch lab]

bump

[mitch lab]

bump these prices are obo except for the o2 extension

[mitch lab]

bump

[mitch lab]

bump

[JDM onlyy]

does the exhaust fit for 4dr?

[mitch lab]

you got text..lol

[JDM onlyy]

you got text..lol


lol i noticed. bump for my buddy

[mitch lab]

bump

[mitch lab]

up

[mitch lab]

up

[JDM onlyy]

bump it up so this can get sold. ppl buy stuff! seen the exhaust yesterday. cleaaaaan

[ducky1177]

do you happen to have a crank shaft pulley?

[JDM onlyy]

do you happen to have a crank shaft pulley?

b or d series?

[mitch lab]

do you happen to have a crank shaft pulley?

Let me know which one your looking for and i can tell you if I have it or not.

[ducky1177]

i need a b series pulley fast
lmk guys

[mitch lab]

got pm'd

[mitch lab]

bump

[mitch lab]

bump

[mitch lab]

bump

[mitch lab]

bump

[JDM onlyy]

i say u should just give me the exhaust and call it a day. :goodjob:

[mitch lab]

I will just do this :tongue1: lol

[JDM onlyy]

and what he don't know is im sittin right next to it....lol im a stick in my car! lol jk

[mitch lab]

haha that means your at my shop..lol

bump

[JDM onlyy]

haha that means your at my shop..lol

bump

lol i was. cmon people buy this stuff. seen everything and they're worth it

[mitch lab]

bump

[mitch lab]

bump

[mitch lab]

bump

[mitch lab]

bump

[mitch lab]

bump

[mitch lab]

bump

[mitch lab]

bump

[mitch lab]

bump

[mitch lab]

bump

[mitch lab]

bump

[mitch lab]

bump

[mitch lab]

bump

[VickNotic]

the ITR pistons uSDM or JDM?? whats the outcome of using the pistons how it is, with the scuff on teh pistons skirt ?

[mitch lab]

bump

[mitch lab]

itr usdm raise the compression ratio up but not high. It should be fine it's not any deep scratches on the skirt.

[mitch lab]

bump

[mitch lab]

bump

[Hoang]

Bump for this man, really good guy y'all. Got my turbo pieced by him now my teg. running sick as f***. I stump couple cars, gotta take this thing go dyno one day lol.

[DC2NR]

Whats the diameter of the exhaust piping? Also where are you located?

[EFlove]

Not bad....

[EG6 Ghost]

im really interested in the pistons im working on my project and wondering if u still had them so please feel free to kall me at (678)558-9930......ask for steven thank you.

[mitch lab]

sorry piston are sold