View Full Version : +15 offset
so im thinking of going with some sportmax wheels on the hatch i know fender rolling is gonna have to be done.my question is that with a 2 1/4 drop is any other mods gonna have to be made???i also wouldnt mind some of your inputs on low offset wheels on hondas,and if yall consider them nice or just ugly.
thanks,josh
Dirty Octopus™
01-05-2009, 06:14 PM
they're nice.
just make sure your car is nice. try to tuck tire.
a lot of low offset Honda folks dont but look into getting a camber kit. it'll allow all the adjustability you may need. Thats what i did to get my +0's under there with very little fender rolling.
they're nice.
just make sure your car is nice. try to tuck tire.
a lot of low offset Honda folks dont but look into getting a camber kit. it'll allow all the adjustability you may need. Thats what i did to get my +0's under there with very little fender rolling.
thats what i was thinkin,im thinkin of goin 195 45 15 tire size for a more stretched look.are your rims 15s or 16s
LIKEG6
01-05-2009, 06:32 PM
Don't stretch the tires. Get a 205/50/15 size tire on there and it will look better
Don't stretch the tires. Get a 205/50/15 size tire on there and it will look better
ive seen pics of them with 205 50 15s on a hatch and they look ugly as hell...thats the only reason im thinkin of stretchin them a bit...
Dirty Octopus™
01-05-2009, 07:13 PM
do NOT get 205s. they will NEVER fit under the car.
stretching is not bad. these wheels operated perfectly fine wrapped in the 195/50/15's i had on them .
once i make my current BBS' 15x8 i will be running a 195/50/15 tire once again.
these sportmax's were 15x8 +0 all the way around.
http://i200.photobucket.com/albums/aa17/DirtyOctopus/1PICT5495b.jpg
http://i200.photobucket.com/albums/aa17/DirtyOctopus/1PICT5317b.jpg
http://i200.photobucket.com/albums/aa17/DirtyOctopus/1PICT5229b.jpg
http://i200.photobucket.com/albums/aa17/DirtyOctopus/1PICT5232b.jpg
^that shit looks crazy as hell and you didnt have any rubbin issues???thats the only reason im going +15 is cause i think ill be pushin clearance.
wantboost
01-05-2009, 07:43 PM
like others have said, do NOT get the 205's if you want to tuck.
like others have said, do NOT get the 205's if you want to tuck.
oh im gonna run 195s just cause im tuckin..im just tryin to decide on a 0 offset or the 15 offset.
Dirty Octopus™
01-05-2009, 08:56 PM
oh im gonna run 195s just cause im tuckin..im just tryin to decide on a 0 offset or the 15 offset.
stick with +15 if you want little to no issues.
my +0's were actually fine up front (except for making super hard U turns)
but since my suspension wasnt to spec it would rub occasionally on bumps. but i never complained.
once i get bigger lips my BBS' should be around that offset. that should be more than enough pleasant of an offset :goodjob:
stick with +15 if you want little to no issues.
my +0's were actually fine up front (except for making super hard U turns)
but since my suspension wasnt to spec it would rub occasionally on bumps. but i never complained.
once i get bigger lips my BBS' should be around that offset. that should be more than enough pleasant of an offset :goodjob:
thanks alot for your advice.....repd:goodjob:
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.