ATK_Designs
09-14-2005, 06:13 PM
It's ECS 848P-A. Supports Socket 478 Pentium 4 (Prescott and northwood), also support Celeron P4 as well.
Special Features:
FSB 800
HT CPU Support
DDR 400
AGP 8X
Serial ATA
6 Channel Audio
Suspend to RAM
Processor:
Socket 478 for Intel Pentium 4 processor
FSB 800/ 533/ 400MHz
Support Hyper-Threading Technology
Chipset:
Intel® 848P & ICH5
North Bridge: Intel® 848P
South Bridge: Intel® ICH5
Memory:
2 x 184-pin DDR DIMM socket support up to 2 GB
Support DDR400/333/266 MHz 2.5V DDR SDRAM
Storage:
Support by Intel® ICH5
4 x Ultra DMA100/66 devices
2 x Serial ATA devices
Audio:
Realtek ALC655 6-Channel audio CODEC
Compliant with AC'97 2.3 specification
LAN RTL8100C 10/100 Mbps Faster Ethernet controller Expansion Slots
1 x AGP 8X/4X slot
5 x PCI slots
1 x CNR slot
Back Panel I/O Ports:
1 x PS/2 keyboard & PS/2 mouse connectors
4 x USB ports
1 x RJ45 LAN connector
1 x Parallel port (LPT1)
1 x Serial port (COM1)
1 x Audio ports (Line-in, Line-out, Mic-in)
Internal I/O Connectors & Header:
1 x 20-pin ATX Power Supply Connector & 4-pin 12V Connector
1 x Floppy connector supports 360K~2.88M Bytes, 3 Mode FDDs or LS120
2 x IDE connectors
2 x Serial ATA connectors
2 x USB 2.0 header support additional 4 USB Ports
1 x SPDIF out header
1 x Speaker header
1 x Front panel switch/LED header
1 x Front panel audio header
CD in/ AUX in headers
CPUFAN/PWRFAN/SYSFAN connectors
BIOS:
Award 2Mb Flash EEPROM
Supports Plug and Play 1.0A, APM 1.2, Muli Boot, DMI
Full Support for ACPI revision 1.0 specification
Form Factors:
ATX Form Factor, 305*200mm
I'm asking 50 bucks since I bought as a combo with the CPU but don't need it, just need the CPU. Still new. This a a good standard board for mild overclocking without breaking your wallet.
Special Features:
FSB 800
HT CPU Support
DDR 400
AGP 8X
Serial ATA
6 Channel Audio
Suspend to RAM
Processor:
Socket 478 for Intel Pentium 4 processor
FSB 800/ 533/ 400MHz
Support Hyper-Threading Technology
Chipset:
Intel® 848P & ICH5
North Bridge: Intel® 848P
South Bridge: Intel® ICH5
Memory:
2 x 184-pin DDR DIMM socket support up to 2 GB
Support DDR400/333/266 MHz 2.5V DDR SDRAM
Storage:
Support by Intel® ICH5
4 x Ultra DMA100/66 devices
2 x Serial ATA devices
Audio:
Realtek ALC655 6-Channel audio CODEC
Compliant with AC'97 2.3 specification
LAN RTL8100C 10/100 Mbps Faster Ethernet controller Expansion Slots
1 x AGP 8X/4X slot
5 x PCI slots
1 x CNR slot
Back Panel I/O Ports:
1 x PS/2 keyboard & PS/2 mouse connectors
4 x USB ports
1 x RJ45 LAN connector
1 x Parallel port (LPT1)
1 x Serial port (COM1)
1 x Audio ports (Line-in, Line-out, Mic-in)
Internal I/O Connectors & Header:
1 x 20-pin ATX Power Supply Connector & 4-pin 12V Connector
1 x Floppy connector supports 360K~2.88M Bytes, 3 Mode FDDs or LS120
2 x IDE connectors
2 x Serial ATA connectors
2 x USB 2.0 header support additional 4 USB Ports
1 x SPDIF out header
1 x Speaker header
1 x Front panel switch/LED header
1 x Front panel audio header
CD in/ AUX in headers
CPUFAN/PWRFAN/SYSFAN connectors
BIOS:
Award 2Mb Flash EEPROM
Supports Plug and Play 1.0A, APM 1.2, Muli Boot, DMI
Full Support for ACPI revision 1.0 specification
Form Factors:
ATX Form Factor, 305*200mm
I'm asking 50 bucks since I bought as a combo with the CPU but don't need it, just need the CPU. Still new. This a a good standard board for mild overclocking without breaking your wallet.