B_Hoov
12-28-2008, 06:53 PM
got some things lying around that i need gone, all prices are OBO
-complete d series ac set-up lines/compressor/condenser etc...50$ (not pictured)
-stainless turbo oil feed line, used but in great condition 25$
-h22 p/s bracket and pump 10$
-h22 stainless exhaust manifold flange, bought new for my turbo h22 EF so i could make my custom turbo manifold, never touched 10$
-94-97 accord glove box, perfect condition (those are flakes of paint not scratches) 10$
last but not least, getting rid of my last street bike motor, was going to throw this on a shifter kart and call it a day but have decided to sell it instead. bike was wrecked with 11,000mi motor starts right up, i have made a small board with all of the electronics (ECM,voltage regulator,coil packs,etc) everything you need is here, you'll need to jump out 4 wires at the ecm for the motor to start, two are the kickstand kill switch wires, and the other is the neutral safety switch wires, not sure which is which but have schematics showing them, you will also need to jump out some wires on the keyswitch plug, i was just going to run a push button start and hide a master kill switch, all in all this would be a great motor for something CrAzY. here is a link to the specs.
96hp+kart=scary goodness
http://www.motorbikes.be/en/Yamaha_FZR_600_1995.aspx
im willing to trade for some things so hit me up lmk what you have, EF/d series goodies, guns, bows, wheels etc...
-complete d series ac set-up lines/compressor/condenser etc...50$ (not pictured)
-stainless turbo oil feed line, used but in great condition 25$
-h22 p/s bracket and pump 10$
-h22 stainless exhaust manifold flange, bought new for my turbo h22 EF so i could make my custom turbo manifold, never touched 10$
-94-97 accord glove box, perfect condition (those are flakes of paint not scratches) 10$
last but not least, getting rid of my last street bike motor, was going to throw this on a shifter kart and call it a day but have decided to sell it instead. bike was wrecked with 11,000mi motor starts right up, i have made a small board with all of the electronics (ECM,voltage regulator,coil packs,etc) everything you need is here, you'll need to jump out 4 wires at the ecm for the motor to start, two are the kickstand kill switch wires, and the other is the neutral safety switch wires, not sure which is which but have schematics showing them, you will also need to jump out some wires on the keyswitch plug, i was just going to run a push button start and hide a master kill switch, all in all this would be a great motor for something CrAzY. here is a link to the specs.
96hp+kart=scary goodness
http://www.motorbikes.be/en/Yamaha_FZR_600_1995.aspx
im willing to trade for some things so hit me up lmk what you have, EF/d series goodies, guns, bows, wheels etc...