PDA

View Full Version : code p0170 wtf is this!?



silversol
12-27-2008, 03:57 PM
1999 honda civic it does not have a check engine light on but i was checking readyness with my scaner an saw i have a code po170 pending. what is this for?

Tech5
12-27-2008, 04:08 PM
fuel trim, could be many things,
Bad O2 sensor,
vac leak,
weak fuel pump,
ECU,
injector,
timing ,
etc

silversol
12-27-2008, 04:15 PM
fuck where to start!

Barefoot
12-27-2008, 07:42 PM
fuck where to start!o2 timing and vac but thats just me. all easy scan tool will tell u about the o2. timing easy to check no need to explain. as for vac leaks some brake parts cleaner.

fly-n-low
12-27-2008, 08:10 PM
My CEL was on when mine popped up. I replaced my secondary O2 sensor and that fixed the problem. A week later the code popped up for my Primary O2 sensor and replaced that one as well.

dorin48
12-27-2008, 09:59 PM
p0170 is a lean condition on bank 1. You only have one bank of cylinders so thats easy. Most common problem that throws this code is a clogged/old fuel filter.

fly-n-low
12-27-2008, 10:22 PM
I also forgot to mentio that at the same time I replaced my O2 sensor I also adjusted my valves. Check your compression/Leak down levels to see if one of them is out of specs. Could be a valve is too tight/loose. Tech book recommends this before other troubleshooting.

Turbd4DE
12-27-2008, 10:33 PM
This may help:2cents: http://users.skynet.be/MRS/MR/guide/...tics/DI-77.pdf (http://users.skynet.be/MRS/MR/guide/Diagnostics/DI-77.pdf)