BRB Whoreslounge

[Just_CHill]

.
LoL at spray monster. is this other motor built?? i read somwhere that you were ready to get over 8lbs......im assuming you mean w/ this new motor. cant wait to see it finished either way though, we gotta make a BRB (and BRB visitor's in your case LoL) track day when its done and broke in to see what she runs.

:ninja:

Stop holding out...

[LizBiz]

i heard they were fast Why'd you start over??? :thinking:

[bowdown201]

I wanna boost my Ls but i think I am gonna stud the head first.

did you just say my head is studdly? :gay:

[b16EG-HaTcH]

i was just about to tell him to put no homo but you already called him on it LOL

[bowdown201]

:ninja:

Stop holding out...

AAAAAAHHHHHHHHH THE PRESSSUUUUUREEEE!!!!

http://www.youtube.com/watch?v=xtrEN-YKLBM

[HypnoToad]

Why'd you start over??? :thinking:

my account is being held from me.

[b16EG-HaTcH]

:ninja:

Stop holding out...

u forget something.....nnnnnn nnnnnnooooooo

[Just_CHill]

my account is being held from me.
Lol, why?

[HypnoToad]

Lol, why?

noone will tell me.

[Just_CHill]

u forget something.....nnnnnn nnnnnnooooooo
No I didn't...


:ninja:

[b16EG-HaTcH]

bwahahahaha owned by the man....u probably called one of them an asshole or douchebag behind their back and are they are waiting for you to say it to their face or admit you even did it....just a guess though.

[LizBiz]

noone will tell me. That's ghey :gay:

[Hondatypr636]

Nice brandon i thought about that. He beat me to it.

[HypnoToad]

bwahahahaha owned by the man....u probably called one of them an asshole or douchebag behind their back and are they are waiting for you to say it to their face or admit you even did it....just a guess though.

that could be it

[b16EG-HaTcH]

No I didn't...


:ninja:

LoL oh so there WAS homo implied...i thought those were only for me:cry:

[b16EG-HaTcH]

Nice brandon i thought about that. He beat me to it.
what??

[Hondatypr636]

The No homo

[KPFphotography]

hey brandon, whats up man, you been thinking about this shell?

[HypnoToad]

brandon u need to get the hatch on the road,see how the old stock maro stands up to the swaped hatch

[Just_CHill]

LoL oh so there WAS homo implied...i thought those were only for me:cry:
I'm sorry but he looks like Tom Cruise and it gets to me sometimes! LOL!!!

OK OK OK OK OK OK


NO HOMO!!!!@!!!!

[b16EG-HaTcH]

hey brandon, whats up man, you been thinking about this shell?

yeah i will let you know something by tomorrow.

[slostang]

http://i181.photobucket.com/albums/x164/CatsR0x/lolwutermelon.jpg

[Hondatypr636]

Im out yall off to bed ill call you in the morning brandon

[KPFphotography]

yeah i will let you know something by tomorrow.
ok got ya

[b16EG-HaTcH]

brandon u need to get the hatch on the road,see how the old stock maro stands up to the swaped hatch

but why would you wanna waste your time...unless you think u are gonna win, and have a honda kill story under your belt?? ill tell ya what u front me the $500 to get it chipped and tuned and get a new header and i will run you....and if i win i dont gotta pay you back......DEAL OR NO DEAL???:yes:

[b16EG-HaTcH]

Im out yall off to bed ill call you in the morning brandon
ROGER WILCO

[HypnoToad]

but why would you wanna waste your time...unless you think u are gonna win, and have a honda kill story under your belt?? ill tell ya what u front me the $500 to get it chipped and tuned and get a new header and i will run you....and if i win i dont gotta pay you back......DEAL OR NO DEAL???:yes:

im fine,i have a 16sec pig thats running lean..

[b16EG-HaTcH]

and i have a stock 16 sec. honda sounds like a close race you could be $500 richer

[HypnoToad]

and i have a stock 16 sec. honda sounds like a close race you could be $500 richer

guess ill have to pass then.

[b16EG-HaTcH]

ok LMK if you change your mind

[Just_CHill]

guess ill have to pass then.
Don't be a puss!

[b16EG-HaTcH]

^^same offer goes to you too.

[HypnoToad]

Don't be a puss!

k let me go pawn my les paul and we will do it up:rolleyes:

[Just_CHill]

^^same offer goes to you too.
If we are racing both hatches then we are good to go!

[b16EG-HaTcH]

he would probably race you for it

[HypnoToad]

im fine.

[RickyBobbyV8]

U wana bring the sti out to rynolds in 2 weeks

[b16EG-HaTcH]

yeah if its done w/ its maintenance by then

[Just_CHill]

yeah if its done w/ its maintenance by then
Interesting... :ninja:

[RickyBobbyV8]

yeah if its done w/ its maintenance by then
wana run for some money?

[b16EG-HaTcH]

STFU and GTFO here w/ that shit....ur daddy is finally done w/ his big motor and now you wanna run a stock 4 cyl.

[RickyBobbyV8]

damn just tryin 2 see if i could make a little money off of u

[Motivation]

damn just tryin 2 see if i could make a little money off of u
I do want to run Franky (frankie, however he spells it) whenever my car is finished... But it's going to be a while. :(

What all you got going on with your sbc 350? Just wondering.

[b16EG-HaTcH]

go try ur scams elsewhere

[RickyBobbyV8]

I do want to run Franky (frankie, however he spells it) whenever my car is finished... But it's going to be a while. :(

What all you got going on with your sbc 350? Just wondering.
Got it shortblocked and getting the heads friday, what are u building?

[HypnoToad]

STFU and GTFO here w/ that shit....ur daddy is finally done w/ his big motor and now you wanna run a stock 4 cyl.

not much different than not wanting to run a stock camaro with a engine swapped honda:cheers:

[Motivation]

Got it shortblocked and getting the heads friday, what are u building?

Good deal... Planning on putting out a decent amount of power?


Ummm.... I have a little project I am slowly working on in my garage... Nothing too major...

[03RCode]

damn just tryin 2 see if i could make a little money off of u


When are you going to let me make a little money off you?

[b16EG-HaTcH]

not much different than not wanting to run a stock camaro with a engine swapped honda:cheers:

u have a 2XX hp v8 i have a stock 160 HP dual cam 4 cyl.......are u scared of it or something??? and if i remember correctly u were the one who wanted to race me....and i said when it is tuned i will be glad to anally massacre that piece of shit you call a car.

[RickyBobbyV8]

When are you going to let me make a little money off you?
Its gona be a while before ill be able 2, but i will let u know when i am

[03RCode]

Its gona be a while before ill be able 2, but i will let u know when i am


Sounds good to me, I'm tearing my car down tomorrow. Time to make some nice numbers :goodjob:

[b16EG-HaTcH]

and you know it is funny hypnoqueer the only time i ever see you say " lets race " is when you know someone's car is either not running right or not running at all....so if your gonna be a pussy and only call out shit like that just stay the fukk out of here please...i am tired of reading the worthlesness that you call posts all in the sake of your rep or post count......thanks and have a nice morning.

[HypnoToad]

u have a 2XX hp v8 i have a stock 160 HP dual cam 4 cyl.......are u scared of it or something??? and if i remember correctly u were the one who wanted to race me....and i said when it is tuned i will be glad to anally massacre that piece of shit you call a car.

140whp V8,3400 pound,non-lsd running lean.

maybe i should get my car tuned.


i always just joked with u about it,didnt know you were gonna get all serious bout it/

[RickyBobbyV8]

Good deal... Planning on putting out a decent amount of power?


Ummm.... I have a little project I am slowly working on in my garage... Nothing too major...
somewhere around 200 hp im guessing

[03RCode]

140whp V8,3400 pound,non-lsd running lean.

maybe i should get my car turned



Grow the mullet on out and you'll have like 600whp... guarenteed.

[b16EG-HaTcH]

well your the one who bought that piece o shit.......but seriously man quit trying to be a hardass on the internet. i have told you repeatedly that my car is running a single cam map on a dual cam motor. does that sound like it is gonna run right to you??? didnt think so.i have also repeatedly told you when i get it tuned so i wont blow up my shit that i will gladly race you. but for you to say that i wouldnt race your stock camaro is BS. so quit tryin to e-thug then act all friendly to my face...if your gonna talk shit, talk it here and there.

[Just_CHill]

AAAAAAHHHHHHHHH THE PRESSSUUUUUREEEE!!!!

http://www.youtube.com/watch?v=xtrEN-YKLBM
Dude, I love that song!

[HypnoToad]

well your the one who bought that piece o shit.......but seriously man quit trying to be a hardass on the internet. i have told you repeatedly that my car is running a single cam map on a dual cam motor. does that sound like it is gonna run right to you??? didnt think so.i have also repeatedly told you when i get it tuned so i wont blow up my shit that i will gladly race you. but for you to say that i wouldnt race your stock camaro is BS. so quit tryin to e-thug then act all friendly to my face...if your gonna talk shit, talk it here and there.

im not talking shit bout anything...ur the one attacking me and calling my car a POS,its a slow car end of it....no i didnt know about your map.

well im glad we had this talk and got ur true feeling out.

and dont talk bout my car,we cant all afford a sti

[b16EG-HaTcH]

im not talking shit bout anything...ur the one attacking me and calling my car a POS,its a slow car end of it....no i didnt know about your map.

well im glad we had this talk and got ur true feeling out.

and dont talk bout my car,we cant all afford a sti

it has nothing to do w/ affording an STi or anything else, i have heard about you calling me an asshole and a douchebag and everything else since i said your little thread about death was stupid. then you came in here and started shit saying i was backing out of running your stock camaro w/ my swapped honda (implying that apparently that i have a k20 or something else), when i was talking to rickybobby, and not you in the first place. it has nothing to do w/ true feelings either...i have honestly never had a problem w/ you until i start hearing about you calling me an asshole and such and then when you see me you try to act like your my best fucking friend. then last night when travis said something about it you were speechless.:screwy: and you didnt know about my map...i have told you ever since you found out the car was running (about 2 weeks now)that i had to at least get a base map on it to even drive it .....so try again. i have never talked any diff. about you or too you on the internet than i would to your face, all i ask is that you return the favor. if you dont like something i say tell me...dont let me find out through other ppl.......im not gonna start a fight w/ you over what was said on the internet. b/c at the end of the day its still the internet, and i know i can still get in my STi and drive into the sunset (since apparently owning an STi is an accomplishment to you)

[Bbat017]

im on a boat mother fucker on a boat, posiedon look at me!!! :crazy:

[HypnoToad]

it has nothing to do w/ affording an STi or anything else, i have heard about you calling me an asshole and a douchebag and everything else since i said your little thread about death was stupid. then you came in here and started shit saying i was backing out of running your stock camaro w/ my swapped honda (implying that apparently that i have a k20 or something else), when i was talking to rickybobby, and not you in the first place. it has nothing to do w/ true feelings either...i have honestly never had a problem w/ you until i start hearing about you calling me an asshole and such and then when you see me you try to act like your my best fucking friend. then last night when travis said something about it you were speechless.:screwy: and you didnt know about my map...i have told you ever since you found out the car was running (about 2 weeks now)that i had to at least get a base map on it to even drive it .....so try again. i have never talked any diff. about you or too you on the internet than i would to your face, all i ask is that you return the favor. if you dont like something i say tell me...dont let me find out through other ppl.......im not gonna start a fight w/ you over what was said on the internet. b/c at the end of the day its still the internet, and i know i can still get in my STi and drive into the sunset (since apparently owning an STi is an accomplishment to you)

yea dude it did piss me off when u talked bout my thread,cause it was like u were making fun of what happened to me,so i wont say im sorry bout that.

also just really getting tired of the pick on me thing,its gotten old.(not just u)

and i take pride in my car,its all i have and i love it.......so ofcourse i dont like someone calling it a POS...ive never said that to ur cars.

now we can squash this,cause i really dont want this to go on forever....so guess take it or leave it.

[b16EG-HaTcH]

nope just said it was stupid to post shit like that on a PUBLIC forum....where BTW criticism can be expected.....and much less a car forum. stuff like that doesnt belong on the internet unless its on shareyourneardeathexperiences.org and as far as picking on you.....i dont pick on you unless you bring it upon yourself just like i do everyone else when they say something stupid...i dont know its like you are 2 diff. ppl when you are hanging w/ us and when you are on here. and we call everyone's car a POS so if you feel "hurt" by it then you need to reevaluate the whole situation of hangin w/ me when we are around everyone else. i cant speak for them but your the only one who seems to get their feelings hurt by anything i say. so IDK what to tell ya.

[b16EG-HaTcH]

Currently Active Users Viewing This Thread: 5 (5 members and 0 guests)
b16EG-HaTcH, Mullet Man, Just_CHill+, RickyBobbyV8, Hondatypr636+


man for you to be done w/ it you sure re watching this thread like a hawk...its been posted for all of 10secs. and ur right in here reading it

[Motivation]

somewhere around 200 hp im guessing

Well, I know you are not talking about only getting 200 hp out of the sbc 350... And no, definately not looking for only 200 out of mine. I will NOT bring the car out except towing it to get it tuned, unless I am at least around the 550 mark...

[Just_CHill]

Good morning everyone!

[RickyBobbyV8]

Well, I know you are not talking about only getting 200 hp out of the sbc 350... And no, definately not looking for only 200 out of mine. I will NOT bring the car out except towing it to get it tuned, unless I am at least around the 550 mark... maybe about 250 to the wheels, ill post the dyno pull on here as soon as i get it done, how much boost u gona be runin?

[Hondatypr636]

How is it going Chris?

[ACCORDPRIDE]

damn look at the 2 brothers fighting





aint that just cute

[ACCORDPRIDE]

yall kiss and make up yet??????????

[Grimm Reeper]

Yo....

[LizBiz]

Geeze I see it went down in here last night!!!! *cleans blood off the floor*

[Grimm Reeper]

:ninja:

[allmotorX]

:ninja:post whoring can anybody help me with this hondata shit im confused

[p3tey2]

wats up peps

[Grimm Reeper]

post whoring can anybody help me with this hondata shit im confused

whats confusing about it :thinking:

[RickyBobbyV8]

anyone need a t3 t4 turbo? 300 obo

[Just_CHill]

yall kiss and make up yet??????????

:lmfao:


How is it going Chris?

Pretty good. Just doing class and having fun.

[Just_CHill]

Currently Active Users Viewing This Thread: 5 (4 members and 1 guests)
Just_CHill, bowdown201, Axon360, b16EG-HaTcH


Goooood, goooood!http://i19.photobucket.com/albums/b189/Nightmare333/Miscellaneous/FamilyGuy-Good20Good.gif

[DSGMach1]

After last night:eek:, I have just what this thread needs.:cool:

http://www.youtube.com/watch?v=TR5Qo4Pnc94

[Just_CHill]

After last night:eek:, I have just what this thread needs.:cool:

http://www.youtube.com/watch?v=TR5Qo4Pnc94
Something that had to be taken care of. But it's all good now.

What's everyone up to?

[Motivation]

maybe about 250 to the wheels, ill post the dyno pull on here as soon as i get it done, how much boost u gona be runin?


Eh, 25-35psi is what I am hoping for... Just depends on how the tune goes...

[ACCORDPRIDE]

Eh, 25-35psi is what I am hoping for... Just depends on how the tune goes...


damn you couldnt just leave me alone

you gotta try to beat me to it

oh well - im on a boat Mothafuka -

[ACCORDPRIDE]

Currently Active Users Viewing This Thread: 5 (3 members and 2 guests)
ACCORDPRIDE, DarKStaR, DSGMach1

what up boy?


what you end up running last week bro??

[Motivation]

damn you couldnt just leave me alone

you gotta try to beat me to it

oh well - im on a boat Mothafuka -

:thinking:


What you talking about, Travis? lol. Remember, we have the same goals in mind for our projects... To shut all the ignorant people up that think they can't be touched... Or at least give them a little competition. :goodjob:

Also, it's going to be a while... You know how that goes. But like you, just know it will be worth it when they are finally finished.

[ACCORDPRIDE]

yea i can respect that and i totally understand what your saying

but take it from me
builds that take more than 6 months suck
im always wishin i had lower goals so it wouldnt take this long but oh well

[Motivation]

yea i can respect that and i totally understand what your saying

but take it from me
builds that take more than 6 months suck
im always wishin i had lower goals so it wouldnt take this long but oh well
lol. yeah. Everytime you see someone rev up at you or trying to run their mouth you want to jump in but can't cause the car isn't running yet. Or like when they skyline cut me off the other day and just gunned it... Not much I can do at the moment. lol :( But yeah, they do suck... But the last couple of weeks and finishing touches are definately worth looking forward to. Also, you lower your goals then you lower how much you are satisfied afterwards. That's no good. We'll be out there one day with our cars. :cheers:

[ACCORDPRIDE]

lol. yeah. Everytime you see someone rev up at you or trying to run their mouth you want to jump in but can't cause the car isn't running yet. Or like when they skyline cut me off the other day and just gunned it... Not much I can do at the moment. lol :( But yeah, they do suck... But the last couple of weeks and finishing touches are definately worth looking forward to. Also, you lower your goals then you lower how much you are satisfied afterwards. That's no good. . our grandkids will be out there one day with our cars:cheers:

fixed - no homo

[Motivation]

:lmao:

Errr... I REALLY hope not... I wanted mine to be done for friday night drags this year... But I am going to go for next year now. lol

[Motivation]

Anyways, what's up BRB? Everyone doing alright?

[Just_CHill]

Anyways, what's up BRB? Everyone doing alright?
Doing good! You?

[Motivation]

Doing good... Texas still treating you right? Staying out of trouble... I mean, at least not getting caught anyways...

[Grimm Reeper]

Yo what up Tim

[b16EG-HaTcH]

what it do people.

[Just_CHill]

what it do people.
Sup dude!

[b16EG-HaTcH]

nothing??i am talking to you on the phone as we speak.

[Grimm Reeper]

Ghey!!!!!!!!!!!

[b16EG-HaTcH]

yes........yes you are!

[Just_CHill]

nothing??i am talking to you on the phone as we speak.
Lol, oh yeah!


Ghey!!!!!!!!!!!

Awww... someone's butt hurt cause we're not talking to him on the phone

[OldsTech]

Man, Im ready to get my parts to the paint man. I got everything in a box ready to go

[Axon360]

then stop typing and paint the shizzz

[OldsTech]

then stop typing and paint the shizzz

I will have everything out and shippin hopefully monday. I took the tail out of the attic tonight and put it in the camaro. I about cried when I seen my Main fairings next to it.

[Axon360]

I'm stayin home this weekend, anyone got anything planned?

[OldsTech]

http://lh3.ggpht.com/joelrgross/SK2Lt-9aTLI/AAAAAAAACE0/BeDGVHGCm2I/pic01733.jpg?imgmax=400

[Axon360]

Bleh, I think imma start cleaning up my engine bay saturday...start paintin shit

[Axon360]

http://lh3.ggpht.com/joelrgross/SK2Lt-9aTLI/AAAAAAAACE0/BeDGVHGCm2I/pic01733.jpg?imgmax=400\

rofl awesome

[OldsTech]

This is for Jake...
http://lh6.ggpht.com/joelrgross/SK2MGHL4_eI/AAAAAAAACGs/yzrq7Ywa3Ik/pic24075.jpg?imgmax=512
with his PT Cruiser engine:lmfao:

[Axon360]

So I think saturday I'mma paint my battery tray, that solenoid bracket, some random stuff....and my wheels, the kicker

[OldsTech]

http://i245.photobucket.com/albums/gg74/jubed/jokes/ATT1395128.jpg

LOL NVM

[OldsTech]

http://i51.photobucket.com/albums/f376/Brian1969/GayJiuJitsu.jpg

UMmm ...

[OldsTech]

http://www.forumammo.com/cpg/albums/userpics/10063/demotivational-posters-envy.jpg (http://www.forumammo.com/cpg/albums/userpics/10063/demotivational-posters-envy.jpg)

[Axon360]

Envy the Corolla!

[OldsTech]

This is for Rupert
http://www.forumammo.com/cpg/albums/userpics/10071/changemotivator.jpg (http://www.forumammo.com/cpg/albums/userpics/10071/changemotivator.jpg)

[OldsTech]

Hey Jake like the time at Finish Line!!!

http://www.forumammo.com/cpg/albums/userpics/10062/1182659509832.jpg (http://www.forumammo.com/cpg/albums/userpics/10062/1182659509832.jpg)

[RickyBobbyV8]

http://i61.photobucket.com/albums/h61/georgiaboy6265/Weed.jpg
http://i61.photobucket.com/albums/h61/georgiaboy6265/marijuanagerbil.jpg

[OldsTech]

http://www.forumammo.com/cpg/albums/userpics/10071/poster3545256.jpg (http://www.forumammo.com/cpg/albums/userpics/10071/poster3545256.jpg)

[RickyBobbyV8]

just thought id throw my :2cents: in

[OldsTech]

LOL I was going to post that one but I passed. Since imports are all metric.. Americans try to be

[Grimm Reeper]

Awww... someone's butt hurt cause we're not talking to him on the phone


Far from it my good lil felicitous friend :goodjob:

[OldsTech]

There is alot better ones. But my wife is sittin next to me. And plus some ppls might get in trouble

[Axon360]

Hey Jake like the time at Finish Line!!!

http://www.forumammo.com/cpg/albums/userpics/10062/1182659509832.jpg (http://www.forumammo.com/cpg/albums/userpics/10062/1182659509832.jpg)

dude idc what u say, she looked over 18 til I seen her up close ^^def not this one tho,

[OldsTech]

Ummm Im bored I will post more posters tomarrow I guess

[Axon360]

http://theburningbiscuit.com/Pictures%20for%20site/Demotivational%20Posters/Procrastination.jpeg
Chris that's you man

[Axon360]

I seen brad ridin his bike today :( I want's minesssssss back on the road. Better put the batt charger on it tomorrow

[RickyBobbyV8]

http://i61.photobucket.com/albums/h61/georgiaboy6265/jailbait.jpg

[OldsTech]

LOL They get better.

[RickyBobbyV8]

http://i61.photobucket.com/albums/h61/georgiaboy6265/playdumbjailbait18.jpg

[RickyBobbyV8]

http://i61.photobucket.com/albums/h61/georgiaboy6265/13833-SEATBELTS-Click_It_or_Ticketw.jpg

[DSGMach1]

http://i61.photobucket.com/albums/h61/georgiaboy6265/playdumbjailbait18.jpg

I don't even have to say anything about the irony in your posts:police:

[RickyBobbyV8]

I don't even have to say anything about the irony in your posts:police:
lol you will find some truth in most my posts

[Bbat017]

I don't even have to say anything about the irony in your posts:police:
QFT becuase his girlfreinds like 14 :lmfao: :lmfao: :lmfao:

[RickyBobbyV8]

http://i61.photobucket.com/albums/h61/georgiaboy6265/motivator5384594.jpg:lmfao:

[Bbat017]

^^^^ Dumbest poster in the thread

[RickyBobbyV8]

did u just sit at home one day and think of ways to make your car look worse lol

[Bbat017]

http://i61.photobucket.com/albums/h61/georgiaboy6265/motivator5384594.jpg:lmfao:
your just jealous and for one those are steelies not wheels so STFU and GTFO

[Bbat017]

did you go get your girlfreind from elementry school today and give her a lollipop for being a good girl?

[RickyBobbyV8]

your just jealous and for one those are steelies not wheels so STFU and GTFO
:thinking:
Wheel
–noun 1. a circular frame or disk arranged to revolve on an axis, as on or in vehicles or machinery.:lmfao::lmfao::lmfao::lmfao:

[Bbat017]

did u just sit at home one day and think of ways to make your car look worse lol
im sorry do you even have a car on the road or even have a license

[RickyBobbyV8]

did you go get your girlfreind from elementry school today and give her a lollipop for being a good girl?
Actually she goes to high school and shes 17 so she isnt jailbait anymore, get your shit togather b4 you come at me:2up:

[RickyBobbyV8]

im sorry do you even have a car on the road or even have a licenseI do have a truck that i bet will outrun that POS u have

[Bbat017]

:thinking:
Wheel
?noun 1. a circular frame or disk arranged to revolve on an axis, as on or in vehicles or machinery.:lmfao::lmfao::lmfao::lmfao:
everyone on a car forum would not consider those wheels bc they are not aftermarket so STFU

[RickyBobbyV8]

everyone on a car forum would not consider those wheels bc they are not aftermarket so STFU
LOL u seem more retarded everytime you post somthing

[Bbat017]

I do have a truck that i bet will outrun that POS u have
but you cant drive it so u fail

[RickyBobbyV8]

but you cant drive it so u fail
Can still drive far enough to come embarrass u in a truck so u fail:lmfao:

[Bbat017]

LOL u seem more retarded everytime you post somthing
your just retarded period at least i didnt ask my dad if i could bore out a piston to make it lower compression or use a completely circular camshaft

[Bbat017]

Can still drive far enough to come embarrass u in a truck so u fail:lmfao:
conrats u can beat a stock honda do u want a fuckin cookie?

[RickyBobbyV8]

your just retarded period at least i didnt ask my dad if i could bore out a piston to make it lower compression or use a completely circular camshaft
If u would listen instead of being fukin retarded all the time u might know what i was talking about and when did i say something about a circular camshaft, just remember u got owned by a broom lmao

[Bbat017]

If u would listen instead of being fukin retarded all the time u might know what i was talking about and when did i say something about a circular camshaft, just remember u got owned by a broom lmao
just like tb are closer to carbs than they are fuel injection right? :thinking:

[Bbat017]

If u would listen instead of being fukin retarded all the time u might know what i was talking about and when did i say something about a circular camshaft, just remember u got owned by a broom lmao
i remember u getting owned by the GSP when you wrecked your bike

[RickyBobbyV8]

just like tb are closer to carbs than they are fuel injection right? :thinking: tb is fuel injection dumbass

[Bbat017]

tb is fuel injection dumbass
no dumbass u said tb are closer to carbs than they are to fuel injection or do you not remember that becuase you smoke to much weed

[ACCORDPRIDE]

tb is fuel injection dumbass

your the one that said ITBs are closer to a carburator(sp) than FI :lmfao: :lmfao:

your the one that ask your dad if you could just cut your cast pistons down to lower the comp:lmfao: :lmfao:

your the one that asked if it would be better to get the cam closer to completly round so it would open more and for longer dude:lmfao: :lmfao:

just off his balls ricky bobby :2up:

[RickyBobbyV8]

They mount where carbs do and the gas comes out in the same general area, so it is closer to a carb than HPDI or DPFI

[ACCORDPRIDE]

They mount where carbs do and the gas comes out in the same general area, so it is closer to a carb than HPDI or DPFI

:thinking: :thinking: no not even close dumass

[RickyBobbyV8]

:thinking: :thinking: no not even close dumass
actually it is, ever heard of a electronically controlled carburetor? :2up:shows how much u know

[ACCORDPRIDE]

actually it is, ever heard of a electronically controlled carburetor? :2up:shows how much u know

its still contrlled by bowls and floats and vacuum u fuknut

FI is controlled by a computer with injectors/fuel rail and is all completly electronic

and i know you cant grasp this concept as we can tell by you taking all of it off your V6 cause you have know idea how it works:lmfao:

[ACCORDPRIDE]

http://www.youtube.com/watch?v=R7yfISlGLNU


i think this is my new fav song ever








BRB FTW

[HypnoToad]

TBI = very very simple Fuel Injection,it is basicly a computer controlled carburetor...but is still in the Fuel Injection family.

[Just_CHill]

OMFG!!!!!! What is up with BBat and RickyBobby spammin up the place!

I'm fukkin tired though. Ready to get some sleep.


http://theburningbiscuit.com/Pictures%20for%20site/Demotivational%20Posters/Procrastination.jpeg
Chris that's you man

Lol, you know it!

[DSGMach1]

They mount where carbs do and the gas comes out in the same general area, so it is closer to a carb than HPDI or DPFI

http://whall.org/blog/files/retards.jpg

[DSGMach1]

Currently Active Users Viewing This Thread: 3 (3 members and 0 guests)
DSGMach1, Mullet Man, RickyBobbyV8



LOL............yeah.........Just something about seeing those two names together.

[b16EG-HaTcH]

Mornin ppl

[Just_CHill]

Good morning! Time for some fukkin class! Yes! Lol.

[Axon360]

F F F F F F FUUUUGIN BORED...werk is teh fun.

[Axon360]

http://theburningbiscuit.com/Pictures%20for%20site/Demotivational%20Posters/User%20created/Punctuality.jpg

[Bbat017]

TBI = very very simple Fuel Injection,it is basicly a computer controlled carburetor...but is still in the Fuel Injection family.

We are talking bout ITB's on a honda not TBI like on your maro its an argument that me,Travis and Ricky Bobby have been having for a while now

[ACCORDPRIDE]

We are talking bout ITB's on a honda not TBI like on your maro its an argument that me,Travis and Ricky Bobby have been having for a while now


it doesnt matter itb's or tbi its still COMPUTER controlled fuel injection

not electronic where it just reads pos/neg pulses

[Bbat017]

I was just clearing the argument up to Mullet Man that we always have at the shop with ricky booby

[OldsTech]

Ook I trying to understand now. Whats the disagreement. Fuel Injection is Fuel Injection. If it has a Injection then it is FI. A Carb is a Carb.

ITB FI EFI TBI MPFI TPI all types of Fuel Injection and there are probably a million more. A computer is not needed for Fuel injection. Heck All diesel engines are fuel injection. Just Mechanically driven off the engine. I know this isn't my arguement. But it seems there is some confusion.

[OldsTech]

it doesnt matter itb's or tbi its still COMPUTER controlled fuel injection

not electronic where it just reads pos/neg pulses

Maybe its cuz I don't know this system (ITB) But I don't understand this post.

EDIT: ok I read up on ITB injection. Im pretty familar with this system. And still don't understand. TBI and ITB is the same concept

[OldsTech]

TBI = very very simple Fuel Injection,it is basicly a computer controlled carburetor...but is still in the Fuel Injection family.

WRONG!!!! It can be disguised like a carb under the hood with everything installed. But the operation of this is NOTHING like a Carb.The only thing they have in common is they put fuel in almost the same location. And a CCC carb is nothing but a emission Carb. Nothing like fuel injection.

A computer-controlled carburetor uses a solenoid- operated valve to respond to commands from the microcomputer (electronic control unit). The system uses various sensors to send information to the computer that calculates how rich or lean to set the carburetor air-fuel mixture.

OXYGEN SENSOR
TEMPERATURE SENSOR
MANIFOLD PRESSURE SENSOR (MAP)
ELECTROMECHANICAL CARBURE- TOR
MIXTURE CONTROL SOLENOID.

[OldsTech]

I was just clearing the argument up to Mullet Man that we always have at the shop with ricky booby

Ok, I went back and read. I understand now. LOL.. Sorry I like this kind of stuff

[HypnoToad]

WRONG!!!! It can be disguised like a carb under the hood with everything installed. But the operation of this is NOTHING like a Carb.The only thing they have in common is they put fuel in almost the same location. And a CCC carb is nothing but a emission Carb. Nothing like fuel injection.

A computer-controlled carburetor uses a solenoid- operated valve to respond to commands from the microcomputer (electronic control unit). The system uses various sensors to send information to the computer that calculates how rich or lean to set the carburetor air-fuel mixture.

OXYGEN SENSOR
TEMPERATURE SENSOR
MANIFOLD PRESSURE SENSOR (MAP)
ELECTROMECHANICAL CARBURE- TOR
MIXTURE CONTROL SOLENOID.

sorry,thats bascily wat i ment...that fuel is injected the same,and also at low PSI,its also very simple like a carb.

[Motivation]

There is a lot of that technical shit being said in here... wtf?

[OldsTech]

sorry,thats bascily wat i ment...that fuel is injected the same,and also at low PSI,its also very simple like a carb.

They compare it to a carb but the how the component operations NOTHING like a carb. Just the function is the same.

On a carb all you need is Vacuum and fuel and properly set screws.

On a TBI system, you need MAP, ECU, High Fuel Pressure, O2 sensor, and I sure I forgot something.. A very good system.. 100 times better then carb.


Throttle-body injection (called TBI by General Motors (http://en.wikipedia.org/wiki/General_Motors_Corporation) and Central Fuel Injection (CFI) by Ford (http://en.wikipedia.org/wiki/Ford_Motor_Company)) or single-point injection was introduced in the 1940s in large aircraft engines, (then called the pressure carburetor (http://en.wikipedia.org/wiki/Pressure_carburetor)) and in the 1980s in the automotive world. The TBI system injects fuel at the throttle body (http://en.wikipedia.org/wiki/Throttle_body) (the same location where a carburetor introduced fuel). The induction mixture passes through the intake runners like a carburetor system, and is thus labelled a "wet manifold system". The justification for the TBI/CFI phase was low cost. Many of the carburetor's supporting components could be reused such as the air cleaner, intake manifold, and fuel line routing. This postponed the redesign and tooling costs of these components. Most of these components were later redesigned for the next phase of fuel injection's evolution, which is individual port injection, commonly known as MPFI or "multi-point fuel injection". TBI was used extensively on American-made passenger cars and light trucks in the 1980 to 1995 timeframe and some transition-engined European cars throughout the early and mid 1990s.

[b16EG-HaTcH]

bwahahahaha michael is owning mothafukka's w/ his mechanical knowledge....im getting a good laugh off of everything he has posted proving some of you wrong.

[HypnoToad]

They compare it to a carb but the how the component operations NOTHING like a carb. Just the function is the same.

On a carb all you need is Vacuum and fuel and properly set screws.

On a TBI system, you need MAP, ECU, High Fuel Pressure, O2 sensor, and I sure I forgot something.. A very good system.. 100 times better then carb.


Throttle-body injection (called TBI by General Motors (http://en.wikipedia.org/wiki/General_Motors_Corporation) and Central Fuel Injection (CFI) by Ford (http://en.wikipedia.org/wiki/Ford_Motor_Company)) or single-point injection was introduced in the 1940s in large aircraft engines, (then called the pressure carburetor (http://en.wikipedia.org/wiki/Pressure_carburetor)) and in the 1980s in the automotive world. The TBI system injects fuel at the throttle body (http://en.wikipedia.org/wiki/Throttle_body) (the same location where a carburetor introduced fuel). The induction mixture passes through the intake runners like a carburetor system, and is thus labelled a "wet manifold system". The justification for the TBI/CFI phase was low cost. Many of the carburetor's supporting components could be reused such as the air cleaner, intake manifold, and fuel line routing. This postponed the redesign and tooling costs of these components. Most of these components were later redesigned for the next phase of fuel injection's evolution, which is individual port injection, commonly known as MPFI or "multi-point fuel injection". TBI was used extensively on American-made passenger cars and light trucks in the 1980 to 1995 timeframe and some transition-engined European cars throughout the early and mid 1990s.

yea i read that too,and thats bascily what i was saying,and yes it is a good system:cheers:

[OldsTech]

Well I drop my stuff off at the paint shop today. I want tell how much he is charging me (not in a good way) But It is there being painted. Everything else just needs to be Powder coat. And Im waiting on a quote from my PC guy now. Then after that I need tires, insurance, chain and sprocket, and little stuff. And she is ready to go

OOO yeah, I signed up for another 6 yrs today. I took the 15,000 dollar re-enlistment bonus. I was goin to join the Air guard. But I could never get intouch with them. And after today the bonus drops to 5,000 dollars so I took the money. But I won't get it till my ETS is up

[ACCORDPRIDE]

i love all the research and explanations behind all of that - wish i wasnt so lazy and would have done that myself so we didnt have to have this discussion- i was just trying to enlighten ricky bobby of the differences between the ITB setup and a carb setup- he stated that ITBs which come on most bikes that are FI and can be adapted to fit hondas are more like little carbs and not a form of FI- i was just trying to explain the difference to him- i didnt want to get into the tbi system but for all intensive purposes it is FI not carb

[ACCORDPRIDE]

Maybe its cuz I don't know this system (ITB) But I don't understand this post.

EDIT: ok I read up on ITB injection. Im pretty familar with this system. And still don't understand. TBI and ITB is the same concept


sorry post was confusing but that is what i meant
guess it wasnt that clear cause i was explaining it as i was talking to ricky bobby in person and i was explaining our convo

[Just_CHill]

Well I drop my stuff off at the paint shop today. I want tell how much he is charging me (not in a good way) But It is there being painted. Everything else just needs to be Powder coat. And Im waiting on a quote from my PC guy now. Then after that I need tires, insurance, chain and sprocket, and little stuff. And she is ready to go

OOO yeah, I signed up for another 6 yrs today. I took the 15,000 dollar re-enlistment bonus. I was goin to join the Air guard. But I could never get intouch with them. And after today the bonus drops to 5,000 dollars so I took the money. But I won't get it till my ETS is up
Good times man. Like I said, hope things work out for you man!

[b16EG-HaTcH]

your welcome jake for your second green bar.

[OldsTech]

i love all the research and explanations behind all of that - wish i wasnt so lazy and would have done that myself so we didnt have to have this discussion- i was just trying to enlighten ricky bobby of the differences between the ITB setup and a carb setup- he stated that ITBs which come on most bikes that are FI and can be adapted to fit hondas are more like little carbs and not a form of FI- i was just trying to explain the difference to him- i didnt want to get into the tbi system but for all intensive purposes it is FI not carb

Its ok... Im like that sometimes too. I knew if I posted up. I need facts tho. Or I shouldn't post at all....

Really, I was goin to use bikes has an example but I didn't want to twist the discussion up more. My 2005 Suzuki Katana 600 is carb. Which is good and bad. Depending on how skill you are. And patience. Now since we are on the topic. You can adapted a carb engine to FI. It is very easy. Now you can't convert Carb to FI.

But making original carb Inline 4 motorcycle to FI is very easy. You just got to know your resources. Now I know alittle about you travis. And I heard you are pretty knowlegdable. So did I read the post right or not. Becuz you know as good has I do. You can convert a bike to FI has easy has you can a car.

EDIT: rereading your post. When you say Honda your talking about motorcycles... Or Car

[ACCORDPRIDE]

car



you can take a set of throttle bodies off a FI bike (not sure wat bike it is but they make a kit for it) and adapt them to fit on the more popular honda motors which will help on a all motor car (and turbo to a lesser extent)

i didnt mean that you cant convert one way or the other - even though i believe you can go both ways as far as the converting goes (carb to FI being alot of work i wouldnt wanna go through) but i wasnt trying to say you could convert either way

[p3tey2]

wats up yah..i always feel left out in this section lol

[cactusEG]

Whats good ppl ?

[Grimm Reeper]

wats up yah..i always feel left out in this section lol

I wonder why :rolleyes: lol



Whats good ppl ?

Not too much Jose, how about you? :goodjob:

[DSGMach1]

I wonder why :rolleyes: lol




Not too much Jose, how about you? :goodjob:

I think you forgot something again...

I'll help get you started.......nnnnnnnn........nnnnnnn
:lmfao:

[b16EG-HaTcH]

l0li had to read it like 5 time to figure out what you were talking about

[b16EG-HaTcH]

wats up yah..i always feel left out in this section lol

here's an idea.....have more content in your posts than "whats up" or "how's it goin" or "whats hananin"

EDIT: im just saying join in the conversation, and dont just leave it at whats up.:goodjob:

[Grimm Reeper]

Ok Lee...... no homo :goodjob:

[allmotorX]

brb ftw!!!

[b16EG-HaTcH]

brb ftw!!!

QFT

[Grimm Reeper]

brb ftw!!!
Would you look at this guy :lmfao:

[DSGMach1]

Ok Lee...... no homo :goodjob:

Just watching out for ya.:goodjob:
You don't want any of those ASAP people thinking BRB is pro homo

[allmotorX]

Would you look at this guy :lmfao:just promoting :D

[OldsTech]

car



you can take a set of throttle bodies off a FI bike (not sure wat bike it is but they make a kit for it) and adapt them to fit on the more popular honda motors which will help on a all motor car (and turbo to a lesser extent)

i didnt mean that you cant convert one way or the other - even though i believe you can go both ways as far as the converting goes (carb to FI being alot of work i wouldnt wanna go through) but i wasnt trying to say you could convert either way

Yeah... After reading your post a few times. I started figuring thats what you was talking about.

Wow, I never thought of using a bike FI on a car. But I guess it would make sense. Something like a ZX-14 or Hayabusa. I mean that is 1.4L and 1.3L so it ain't far off in cubes. Man I bet thats a pain in the tuning dept.

Yeah there is a guy on my Katana forum who converted his Katana to FI. It took a good 4 months from start to finish. Most of it trail and error. Still havn't got all the bugs out.

[b16EG-HaTcH]

http://i260.photobucket.com/albums/ii23/coch76/102_0378.jpg

ITB's FTW this is what he is talking about michael (visual aid.b/c i saw u said u figured it out)
they make an adapter plate for GSXR 1000 and 1300 TB's

[Grimm Reeper]

http://i260.photobucket.com/albums/ii23/coch76/102_0378.jpg

ITB's FTW this is what he is talking about michael (visual aid.b/c i saw u said u figured it out)
they make an adapter plate for GSXR 1000 and 1300 TB's


Jizz n my pants :lmfao:


That's one of the upgrades I look for in the near but oh so distant future :yes:

[allmotorX]

Jizz n my pants :lmfao:


That's one of the upgrades I look for in the near but oh so distant future :yes:x2 but not so distant

[Grimm Reeper]

just promoting :D
preciate it homie :goodjob:


I got to get up in a few hours so I'll holla at y'all lataz [emphasis on the Z] :lmfao:

I'm cool and I'm out :yes:

[OldsTech]

I bet that thing is BAD ASS. It just looks sick... I always like the idea of putting bikes engines in things other then a bike. But never put too much thought into using bike component or concepts on a honda or other import car

[b16EG-HaTcH]

http://www.importatlanta.com/forums/showthread.php?t=220841

jake report to this thread and look for red SRT-4 (inspirational to you maybe) either way badass srt-4

[OldsTech]

http://www.importatlanta.com/forums/showthread.php?t=220841

jake report to this thread and look for red SRT-4 (inspirational to you maybe) either way badass srt-4

OMG 9.5 in the 1/4. Its around the 3 min mark

[Just_CHill]

http://www.importatlanta.com/forums/showthread.php?t=220841

jake report to this thread and look for red SRT-4 (inspirational to you maybe) either way badass srt-4
Damn that's a nice video!

[b16EG-HaTcH]

yep i hope my b16 will be able to hang w/ some of the all motor cars one day........*sighs and walks away

[Just_CHill]

Damn that's a nice video!
I wish I could have been there to see all that action!

[ACCORDPRIDE]

comin to a track near us
http://www.importatlanta.com/forums/showthread.php?t=213876



sorry chris

[Just_CHill]

yep i hope my b16 will be able to hang w/ some of the all motor cars one day........*sighs and walks away
One day sir! I hope I will have something running some 10's one day! First I got to get to my 12's though!

[Just_CHill]

comin to a track near us
http://www.importatlanta.com/forums/showthread.php?t=213876



sorry chris
I've seen the schedule for about 2-3 months. So it's all good man. :(

[p3tey2]

here's an idea.....have more content in your posts than "whats up" or "how's it goin" or "whats hananin"

EDIT: im just saying join in the conversation, and dont just leave it at whats up.:goodjob:

will try been really busy with work and school :eek:

[b16EG-HaTcH]

yeah im shooting for 15's maybe 14's which i figure is good for a stock motor......who knows w/ my driver abilities i may be able to hit 13's or even 12's.

[b16EG-HaTcH]

will try been really busy with work and school :eek:

pssshhh no excuse work and school can wait for BRB

[ACCORDPRIDE]

yeah im shooting for 15's maybe 14's which i figure is good for a stock motor......who knows w/ my driver abilities i may be able to hit 13's or even 12's.



$hit man its got hasport mounts and its a motor swap by BRB standards that means 12's


DDDDDDDDUUUUUUUUUUUUUUHHHHHHHHHHHHH thought you would know that:lmfao::lmfao::lmfao:

[DSGMach1]

I'm shooting for 11's on mota, daily driven.
For this year I want to see all motor consistent 12's.

[b16EG-HaTcH]

yeah according to some ppl an engine swapped honda is the fastest thing in the world and should be running low 13's stock.....they almost seem scared of it....except when they know it isnt running right.

[b16EG-HaTcH]

I'm shooting for 11's on mota, daily driven.
For this year I want to see all motor consistent 12's.

i guess the only question i have for you is......do you have hasport mounts to handle all that power. and what is your VTACK engagement set at to be putting down those kind of numbers??

[Just_CHill]

yeah im shooting for 15's maybe 14's which i figure is good for a stock motor......who knows w/ my driver abilities i may be able to hit 13's or even 12's.

Hell yeah man! I got faith in you!


pssshhh no excuse work and school can wait for BRB

x2!!!


$hit man its got hasport mounts and its a motor swap by BRB standards that means 12's


DDDDDDDDUUUUUUUUUUUUUUHHHHHHHHHHHHH thought you would know that:lmfao::lmfao::lmfao:

Damn right! You better jump on board man!!!

[DSGMach1]

i guess the only question i have for you is......do you have hasport mounts to handle all that power. and what is your VTACK engagement set at to be putting down those kind of numbers??

No hasport mounts......yet I'm looking for something more JDM
VTACK kicks in at 4k YO!!!

[DSGMach1]

Good news!!!! I finally found JDM Mustang parts!!!!
http://www.teamjdm.com/


Actually I can't believe I never posted that before. I've known about them for a long time lol.

[ACCORDPRIDE]

super jdm saleen shaker FTMFW

[ACCORDPRIDE]

Damn right! You better jump on board man!!!

i am - im selling all my stock mounts with inserts just so i can buy the pretty hasports with the race poly in em:goodjob::goodjob:

[bowdown201]

:idb::idb::idb::idb::idb::idb::idb::idb::idb::idb: :idb::idb::idb::idb::idb::idb::idb::idb::idb::idb: :idb::idb::idb::idb::idb::idb::idb::idb::idb::idb: :idb::idb::idb::idb::idb::idb::idb::idb::idb::idb: :idb::idb::idb::idb::idb::idb::idb::idb::idb::idb: :idb::idb::idb::idb::idb::idb::idb::idb::idb::idb: :idb::idb::idb::idb::idb::idb: :idb: :idb::idb::idb::idb::idb::idb::idb::idb::idb::idb: :idb::idb::idb::idb::idb::idb::idb::idb::idb::idb: :idb::idb::idb::idb::idb::idb::idb::idb::idb::idb: :idb::idb::idb::idb::idb::idb::idb:

[ACCORDPRIDE]

thats what i did to your couch biatch +repz for u sir

[bowdown201]

thats what I did to my lady friend tonight that your in love with :goodjob:

[ACCORDPRIDE]

vid or it didnt happen

[DSGMach1]

vid or it didnt happen

x2:eek:




















no homo

[DSGMach1]

super jdm saleen shaker FTMFW

This guy knows whats up!!

[bowdown201]

no vid.....:taun:

[DSGMach1]

no vid.....:taun:

what happened to the part that about a tease? I refreshed it b/c I can't see shit on this computer screen b/c its so dark and it was gone lol. Was it bewbs?

[ACCORDPRIDE]

http://www.teamjdm.com/Main/AMain_r6_c9.gif
http://www.teamjdm.com/Main/AMain_r8_c9.gif:thinking::thinking::thinking::thin king::thinking:......

[DSGMach1]

http://www.teamjdm.com/Main/AMain_r6_c9.gif
http://www.teamjdm.com/Main/AMain_r8_c9.gif:thinking::thinking::thinking::thin king::thinking:......

Why :thinking:

[Just_CHill]

JDM lol!

[Just_CHill]

:idb::idb::idb::idb::idb::idb::idb::idb::idb::idb: :idb::idb::idb::idb::idb::idb::idb::idb::idb::idb: :idb::idb::idb::idb::idb::idb::idb::idb::idb::idb: :idb::idb::idb::idb::idb::idb::idb::idb::idb::idb: :idb::idb::idb::idb::idb::idb::idb::idb::idb::idb: :idb::idb::idb::idb::idb::idb::idb::idb::idb::idb: :idb::idb::idb::idb::idb::idb: :idb: :idb::idb::idb::idb::idb::idb::idb::idb::idb::idb: :idb::idb::idb::idb::idb::idb::idb::idb::idb::idb: :idb::idb::idb::idb::idb::idb::idb::idb::idb::idb: :idb::idb::idb::idb::idb::idb::idb:

x2

[cactusEG]

I wonder why :rolleyes: lol




Not too much Jose, how about you? :goodjob:

just got back from a party !

[Just_CHill]

Bored...

[Just_CHill]

just got back from a party !
Love parties! Didn't get to do any of that today! Hopefully tomorrow though!

[DSGMach1]

Bored...

:werd:

At least you're not at work though. I can't wait to get off. The streets are wet and I can have some fun on the way home. RWD in da rain FTW!!!

[Just_CHill]

:werd:

At least you're not at work though. I can't wait to get off. The streets are wet and I can have some fun on the way home. RWD in da rain FTW!!!
Very true sir!

[cactusEG]

Love parties! Didn't get to do any of that today! Hopefully tomorrow though!

its was great ! White girls going wild and getting lap dances from black girls !

[DSGMach1]

Very true sir!

Then again there is always ...
drifting a fox body off a cliff at moreland FTL!!!

don't know if you were there for that but i heard about it lmao

[Grimm Reeper]

Waiting in the rain FTL

[DSGMach1]

Waiting in the rain FTL

What are you waiting in the rain for at 4 am?

Back to working them street corners?:boobies:

[Grimm Reeper]

What are you waiting in the rain for at 4 am?

Back to working them street corners?:boobies:


Just got in the house, and no Lee, I run my fathers bread route for him on the weekends.

[p3tey2]

pssshhh no excuse work and school can wait for BRB
lol :thinking:

[LizBiz]

Mornin' boyz!!! Homemade cinnimon rolls FTW get @ me!!! Its almost BBQ season!

[Just_CHill]

Mornin' boyz!!! Homemade cinnimon rolls FTW get @ me!!! Its almost BBQ season!
You better save some of those for me.... Or just cook a new batch when I get back.




Good morning everyone!

[LizBiz]

You better save some of those for me.... Or just cook a new batch when I get back.

I got you boo!!!

[Just_CHill]

I got you boo!!!
That's what I am talking about!!!

[OldsTech]

Morning Morning, everyone. Its a good day. Let see if I can do something worth a damn... Plans right now. Is take the wife to Denny's for lunch and looks at some trucks at Toyato dealership in Mcdonugh

[b16EG-HaTcH]

whats up guys...just got back from getting a couch and recliner (i finally have my own recliner) but gotta get some help to get that shit upstairs.