Top quality d series turbo parts!

[-S Double C-]

Im selling all my extra parts and parts from my EF. Unfortunately somehow a hole got in my wastegate line while i was on pump gas and my motor didnt like it too much.

First up is a D-series Spoolin Performance Ramhorn Turbo manifold. It has around 4k on it and is in excellent shape. I made over 500whp with this manifold on a 60-1 turbo
Asking 480
http://i339.photobucket.com/albums/n466/SEANCC_album/mmm001.jpg
http://i339.photobucket.com/albums/n466/SEANCC_album/mmm002.jpg

Next up I have a set of NEW D-series 9:1 SRP Standard bore pistons with Scat H-beam Rods with ARP 2000 rod bolts. Also have a set ACL Race main bearings and rod bearings that are new too. The pistons will need one set of rings from J.E. as i was installing them in a friends motor the last one bent the ring and he let it get to him and gave up on his build. Asking 500 for all of this together.

http://i339.photobucket.com/albums/n466/SEANCC_album/mmm005.jpg
http://i339.photobucket.com/albums/n466/SEANCC_album/mmm006.jpg
http://i339.photobucket.com/albums/n466/SEANCC_album/mmm004.jpg

Next up is D series Eldebrock Performer X Intake manifold with the extra 4 injectors and eldebrock fuel rail. I didnt run the extra 4 injectors cause my 1000cc's were plenty. Price is 240.

http://i339.photobucket.com/albums/n466/SEANCC_album/mmm007.jpg
http://i339.photobucket.com/albums/n466/SEANCC_album/mmm008.jpg

Next is a D16Z6 head that was built by JG Engine Dynamics. I made 511whp on this head at 29.5psi. The head was Ported and Polished on the intake and exhaust side and is smooth as a babys ass lol, it also recieved a 5 angle valve job, the bowls were slightly enlargened and polished along with bronze valve guides and new seals installed. It has new skunk 2 Springs and retainers with a ZEX 59500 Cam and a AEM 3 bolt cam gear. I used the head for around 4k as well and then took it off and hade a local machine shop clean it up and resurface it so it is ready to bolt on for the next buyer. I have around 1600 in the head and looking to get 800 for it. Or will do a package price of the head and intake manifold for 1000.

http://i339.photobucket.com/albums/n466/SEANCC_album/mmm012.jpg
http://i339.photobucket.com/albums/n466/SEANCC_album/mmm009.jpg
http://i339.photobucket.com/albums/n466/SEANCC_album/mmm010.jpghttp://i339.photobucket.com/albums/n466/SEANCC_album/mmm011.jpg
http://i339.photobucket.com/albums/n466/SEANCC_album/mmm013.jpg

NIB ARP D16Z6 Headstuds Asking-!!!!!!!!!!SOLD!!!!!!!!!!!

Ill be posting up alot more items soon as i get pics for them.

[mirz833]

good shit glws

[roche]

Are you looking for any trades?

[-S Double C-]

yeah a ls/vtec kit, wheels, or a b16/gsr head

[Berta]

man, i wish you was selling some of this stuff sooner. I just bought all of my stuff. G/L w/ sell!!

[-S Double C-]

take all this stuff for 1500 this weekend only!

[roche]

May be a long shot, but any chance you'd trade for the wheels in the thread in my sig plus cash for that intake mani and all that?

[-S Double C-]

nah man i checked em out. 15's on my car look like doughnuts cause the car is so big i could only imagine what a 14 would look like lol

[roche]

Lol perfectly understandable. I'll see if i can scrape the cash together, that's a great price for that setup.

[-S Double C-]

bump

[-S Double C-]

head studs sold on H-T!

[hondalover00]

so you gonna go to my side to b-series? hell yeah!

[-S Double C-]

yeah more reliable then a 600whp d series.

[hondalover00]

hell yeah the shop said my head should be done by monday...then gotta get a head gasket...i cant wait to go bust ass

[-S Double C-]

head/intake manifold/ rods and pistons pending sell to Wyt_97teg

[-S Double C-]

i guess the buyer flaked he wont answer the phone

[Jdm94Coupe]

pm me what you got left....

[-S Double C-]

pmed

[-S Double C-]

bump for flakers!! quit wasting my time!

[-S Double C-]

bought another car, im only selling the turbo manifold now