What Does Your Engine Bay Look Like?Post-em

[southside]

I dont know if this is a repost ,Hopefully its not for the squad .....
First off Crx from H-T
http://i209.photobucket.com/albums/bb148/corey20072007/CRX_Dano_05.jpg
Then mines
BEFORE
http://i209.photobucket.com/albums/bb148/corey20072007/HPIM1080.jpg
Then AFTER
http://i209.photobucket.com/albums/bb148/corey20072007/HPIM1045.jpg
I know its not the cleanest but better than it being dirty red:goodjob: Now Lets get it started:camera:

[LIKEG6]

1.Little after I got it
http://a667.ac-images.myspacecdn.com/images01/1/l_cf1b9ca55fdd21f8ae0199b0158dc35a.jpg

2. After a little cleanup and paint
http://a314.ac-images.myspacecdn.com/images01/55/l_2fd594cecefea8b09de05859e58a04f1.jpg

3. How it is currently but without the header wrap
http://c2.ac-images.myspacecdn.com/images02/40/l_3def2f2f6731477e9719bbeab49bf815.jpg

[EvasiveEF9]

http://photos-d.ak.fbcdn.net/photos-ak-sf2p/v255/98/12/51105127/n51105127_31351611_8827.jpg
What I'm WANTING to make it look like in 2009...
http://farm1.static.flickr.com/125/319763804_17f12b18fb.jpg?v=0

[03RCode]

Whipple > Roush.

[EvasiveEF9]

Whipple = 6000 (cannot be found used)
Roush = as low as about 2000 (used for about 1000, give or take a couple hundred)

I'm also looking at Saleen's

[03RCode]

Point Taken.

[southside]

Point Taken.Yea true I seen Kenne Bell mustang at a show like last year.It was sick it was like a 01-03

[EvasiveEF9]

Point Taken.
I make military pay. No big bank, here. LoL. Though I would LOVE to own a Kenne bell or a Whipple, it's just not in my bank, right now. To spend that much on a supercharger, I'd rather build a JDM rex and out a mini turbo on a B-series and build it for autocross...and it'd probably outrun the stang.

On the other hand, I still want an SC or TT because as much as I hate to admit, I haven't run my buddy's SRT-4 but...it would rape me. Not even gonna bullshit. He's pushing 24lbs of boost, currently, and he's about to jump to...I think he said 34 or 37.

[KevinT707]

Here's a few of mine:

Last pic is most recent.

[JDMJAYDC2]

looks good kevin all you need to do is clean it up a bit more who did the vc cut for you?

[Revmaynard]

http://img.photobucket.com/albums/v225/true_men_dont_kill_coyotes/EE%20Wagon/S6300764.jpg



That's the day I got the car. Now it's nothing different. It's cleaner, new plug wires, and I took the black piece off that comes across the radiator.

[JDMJAYDC2]

what did you do that for rev thats fresh air to your intake yo!

[Revmaynard]

Because people lean on them and break the tabs mounted to the radiator and cause your radiator to leak. lol A honda technician told me that he's seen it a lot on EF's the past 20 years. lol

[jmmx258]

MY TURN MY TURN MY TURN!!!!

Now with a wiper motor, radiator, and dizzy.

http://i81.photobucket.com/albums/j214/mxglory258/DSCF4245.jpg

[Scotsman]

MY TURN MY TURN MY TURN!!!!

Now with a wiper motor, radiator, and dizzy.

http://i81.photobucket.com/albums/j214/mxglory258/DSCF4245.jpglet me bum a smoke joey ,lol

[jmmx258]

Haha. I really need to quit. I burned through those packs in about 30 hours or less. I usually go through 2 packs a day.

[Scotsman]

smokin the cowboy killers too

[jmmx258]

Only because they were buy one get one free lol. Camel wides is my cyanide of choice.

[sakasaku]

ill take a update picture sunday :ninja:

[southside]

Here's a few of mine:

Last pic is most recent.As my friends Chevy Loving uncle says,I see where your feeding it :nx::lmfao:

[yungdz]

http://i245.photobucket.com/albums/gg58/dpalmer_2008/DSC00937.jpg

[bam-bam]

My wagon

http://i152.photobucket.com/albums/s162/gtm61/bamwagon/DSCN6983.jpg

Still a work in progress. I WANT it to look stock.

[EvasiveEF9]

http://i245.photobucket.com/albums/gg58/dpalmer_2008/DSC00937.jpg
Holy easy alt swaps!

My wagon

http://i152.photobucket.com/albums/s162/gtm61/bamwagon/DSCN6983.jpg

Still a work in progress. I WANT it to look stock.
Good job so far. All I see is OBD1.

[jfrolang]

http://pic50.picturetrail.com/VOL488/1126601/2124686/287178989.jpg
http://pic50.picturetrail.com/VOL488/1126601/2124686/287178967.jpg
http://pic50.picturetrail.com/VOL488/1126601/2124686/287178979.jpg

[southside]

Nice battery relocation Jfro I would have never thought about that.

[slow_hatch]

My blue Stocknesss(-the intake :D )
http://i240.photobucket.com/albums/ff114/mugen_racer91/Blue%20EF/IMG_2890.jpg
And the White, not so stockness(pre radiator fix)
http://i240.photobucket.com/albums/ff114/mugen_racer91/new8.jpg

[southside]

My blue Stocknesss(-the intake :D )

And the White, not so stockness(pre radiator fix)
http://i240.photobucket.com/albums/ff114/mugen_racer91/new8.jpgI tried putting the small radiator in my car it hits my hood constantly.:no: So im going back to the full one

[LIKEG6]

Does anyone sell a mount for the half size or do you just have to make your own?

[slow_hatch]

Does anyone sell a mount for the half size or do you just have to make your own?

No, and it won't fit right without alot of modification. I've got mine where is sits straight up and down right now, but it took alot of work. I'd take some pics, but it is all taken apart right now :( I'm going w/ an all aluminum unit, i've had shitty experiences with the stupid plastic end tanks.

[bigdare23]

My wagon

http://i152.photobucket.com/albums/s162/gtm61/bamwagon/DSCN6983.jpg

Still a work in progress. I WANT it to look stock.


Post pics of the rest of the car.

[LIKEG6]

No, and it won't fit right without alot of modification. I've got mine where is sits straight up and down right now, but it took alot of work. I'd take some pics, but it is all taken apart right now :( I'm going w/ an all aluminum unit, i've had shitty experiences with the stupid plastic end tanks.

LOL yea right now I have zip ties FTW

Been tryin to figure out how I'm gonna make it work for a little bit I don't have a rad support either so it sucks.


Are the mishimoto and the like the same size as the OE halfsize?

[Revmaynard]

Yo Dare. He has the gray wagon that has come out on blades with the roof rack. Hope ya don't mind, Trev.

http://i152.photobucket.com/albums/s162/gtm61/fender/DSCN5888.jpg
http://i152.photobucket.com/albums/s162/gtm61/fender/DSCN5894.jpg
http://i152.photobucket.com/albums/s162/gtm61/fender/DSCN5905.jpg


The OEM Clean King.:lmfao::lmfao:

[bigdare23]

Yo Dare. He has the gray wagon that has come out on blades with the roof rack. Hope ya don't mind, Trev.

http://i152.photobucket.com/albums/s162/gtm61/fender/DSCN5888.jpg
http://i152.photobucket.com/albums/s162/gtm61/fender/DSCN5894.jpg
http://i152.photobucket.com/albums/s162/gtm61/fender/DSCN5905.jpg


The OEM Clean King.:lmfao::lmfao:

I was wondering if that was him.

[southside]

If he was low then it would be nice, well it still nice but think it would look better dropped to close up some of the wheel gap.

[Revmaynard]

Yea, but there is NO suspension made for the wagon so he'd have to greatly sacrifice comfort and DD ability. Considering he mountain bikes 24/7 he doesn't need it lowered. But I agree it would look better.

[jmmx258]

No, and it won't fit right without alot of modification. I've got mine where is sits straight up and down right now, but it took alot of work. I'd take some pics, but it is all taken apart right now :( I'm going w/ an all aluminum unit, i've had shitty experiences with the stupid plastic end tanks.
The only modification I did with mine, was I cut a hole through the skeleton of my hood so when its shut, the cap sits up inside basically.

For the bottom, I laid a piece of rubber down in between the core support, and cross member, and it sits nicely down in. My hood shuts just fine. With my radiator standing straight up.

[Mad Mike]

Before
http://i123.photobucket.com/albums/o288/cordiaturboowner/DSCF2574.jpg
:cry: As of right now.
http://i123.photobucket.com/albums/o288/cordiaturboowner/DSCF2599.jpg

[08turb@x]

it wire tucked now i cant find the pics i took of the tuck
http://i128.photobucket.com/albums/p196/shuffler_01/turbob16crx011.jpg

[bam-bam]

I didn't mean to jack the whole thread...just caught me mid-swap with a handful of engine pics!
I don't think I'll lower it, though...

[Papa_Smurf]

it wire tucked now i cant find the pics i took of the tuck
http://i128.photobucket.com/albums/p196/shuffler_01/turbob16crx011.jpg

what kind of intercooler is that? and what are the dimensions?

here's mine:

http://i72.photobucket.com/albums/i191/carkbunnie420/IMG_0170.jpg

http://i72.photobucket.com/albums/i191/carkbunnie420/IMG_0171.jpg

ugly :(

[yungdz]

alot of hondas in this thread

[southside]

Not bad im feeling the VC Alan!

[Revmaynard]

alot of hondas in this thread


LOLOLOL noob.:lmfao::lmfao::lmfao::lmfao::lmfao:

[Papa_Smurf]

alot of hondas in this thread

:doh:


Not bad im feeling the VC Alan!

preciate it. the paint looks really killer in the sun

http://i72.photobucket.com/albums/i191/carkbunnie420/outside3.jpg

sparkles FTW lol

[yungdz]

LOLOLOL noob.:lmfao::lmfao::lmfao::lmfao::lmfao:


lol, I just realized what section it was in, mah bad

[jfrolang]

Fitting an EG radiator in an EF is not as hard as some people make it sound. Look at my pictures in this thread. I have an all-aluminum EG radiator with a stock unmodified front crossmember and no hood modifications (although it is an SiR hood).

[southside]

Fitting an EG radiator in an EF is not as hard as some people make it sound. Look at my pictures in this thread. I have an all-aluminum EG radiator with a stock unmodified front crossmember and no hood modifications (although it is an SiR hood).But the SIR hood pops out and the Oem sinks in....So I think you hood gives you a little bit more clearance.

[08turb@x]

what kind of intercooler is that? and what are the dimensions?
Its ebay and works great.....and its 27x7x3 i wanted to get a 31x12x3 but my wastegate was in the way
pic of intercooler
http://i128.photobucket.com/albums/p196/shuffler_01/turbob16crx007.jpg

[08turb@x]

Fitting an EG radiator in an EF is not as hard as some people make it sound. Look at my pictures in this thread. I have an all-aluminum EG radiator with a stock unmodified front crossmember and no hood modifications (although it is an SiR hood).
he is right its not that hard to put an eg radiator in an ef but to put an ek radiator is a bitch and i would sugest for anybody not to do it but if your short of money all you need is brakets, a cutting wheel, and a welder

[slow_hatch]

The only modification I did with mine, was I cut a hole through the skeleton of my hood so when its shut, the cap sits up inside basically.

For the bottom, I laid a piece of rubber down in between the core support, and cross member, and it sits nicely down in. My hood shuts just fine. With my radiator standing straight up.

Hrmm..I am also having to make sure it is far enough forward to clear my shitty DP so that might be my main problem. I need to cut some of my core support, I wonder how much I can cut out :thinking: I've seen people cut the whole thing out before, but they seemed to be more of drag cars.

[bigdare23]

lol, I just realized what section it was in, mah bad


:lmfao:


We welcome anyone in this section so you're cool homie. By the way, badass wagon :goodjob:

[bigdare23]

CRX
http://i58.photobucket.com/albums/g273/bigdare23/My%20Car/Car%20painted/DSC00975-1.jpg
http://i58.photobucket.com/albums/g273/bigdare23/My%20Car/Car%20painted/DSC00977-1.jpg
http://i58.photobucket.com/albums/g273/bigdare23/My%20Car/Car%20painted/NewPIC1.jpg

[bigdare23]

The Hatch

http://i58.photobucket.com/albums/g273/bigdare23/My%20Car/The%20Hatch/DSCF0030.jpg
http://i58.photobucket.com/albums/g273/bigdare23/My%20Car/The%20Hatch/DSCF0032.jpg
http://i58.photobucket.com/albums/g273/bigdare23/My%20Car/The%20Hatch/DSCF0033.jpg

[yungdz]

:lmfao:


We welcome anyone in this section so you're cool homie. By the way, badass wagon :goodjob:


thanks man, thats a nice little crx too :goodjob: is that an h22?

[bigdare23]

thanks man, thats a nice little crx too :goodjob: is that an h22?



nawww, I wish

It's just a torqueless wonder, a b16

[EvasiveEF9]

The Hatch

http://i58.photobucket.com/albums/g273/bigdare23/My%20Car/The%20Hatch/DSCF0030.jpg
http://i58.photobucket.com/albums/g273/bigdare23/My%20Car/The%20Hatch/DSCF0032.jpg

Last I heard you were keeping this USDM...

[Papa_Smurf]

^ lies.

[EvasiveEF9]

^ lies.
I'll bet he thinks he's a sneaky fucker, too...

[CBEeng.]

heres mine pardon the shitt pic and the lack of an air filter

http://i78.photobucket.com/albums/j86/95b16ej1/newpics047.jpg

[southside]

^^^
Tucked I see

[CBEeng.]

^^^
Tucked I see

semi shaved too

[southside]

I see I see :goodjob: pics of the full car would be nice

[CBEeng.]

I see I see :goodjob: pics of the full car would be nice

http://i78.photobucket.com/albums/j86/95b16ej1/newpics040.jpg
http://i78.photobucket.com/albums/j86/95b16ej1/newpics050.jpg
http://i78.photobucket.com/albums/j86/95b16ej1/newpics049.jpg
http://i78.photobucket.com/albums/j86/95b16ej1/newpics042.jpg

[southside]

clean car ,nice wheels

[Revmaynard]

It's like Guy and Alan traded wheels or something. LOL

[Papa_Smurf]

It's like Guy and Alan traded wheels or something. LOL

:lmfao:



ur car is clean homie, RPF1's FTW :goodjob:

[jmmx258]

Hrmm..I am also having to make sure it is far enough forward to clear my shitty DP so that might be my main problem. I need to cut some of my core support, I wonder how much I can cut out :thinking: I've seen people cut the whole thing out before, but they seemed to be more of drag cars.
I'm assuming your DP exits to the right/passenger side. My snail is on the other way around. I made my own DP and it comes out, wraps down around the snail, and hugs the oil pan with 1/2 clearance between the two. I put a few strands of heat tape on the pan. With just a piece of screen and I cut one of my spare foam air filters for my race bike to use as a filter. I do have room to run a piece of IC pipe and a filter. I just chose not to because I've seen what a dirtbike air filter stops, and its less cluttered this way :)

[southside]

:lmfao:



ur car is clean homie, RPF1's FTW :goodjob:I have enkeis but they arent RPF1's:lmfao:

[bigdare23]

Looking good CBE


Now we just need you to come to meets LOL

[Papa_Smurf]

Looking good CBE


Now we just need you to come to meets LOL


word. if my dad saw those pics i bet he'd steal my wheels so fast:lmfao:

[JDMJAYDC2]

damn there are alot of ef's in this thread that dont normally post hopefully this will make them continue to check out our section

[CBEeng.]

Looking good CBE


Now we just need you to come to meets LOL

im trying homie. i need the mother fucker to run. it wont start now and im going through electrical problems. lol

[00CelicaGT]

im trying homie. i need the mother fucker to run. it wont start now and im going through electrical problems. lol

MUST BE A FUCKING PAIN WITH THAT TUCK!

[southside]

im trying homie. i need the mother fucker to run. it wont start now and im going through electrical problems. lolDang I guess im not the only one that is going threw this.

[CBEeng.]

MUST BE A FUCKING PAIN WITH THAT TUCK!

not the tuck. paint on the starter kept it from grounding. so i thought the batt was dead. sos i hooked up the super Batt charger to it forgot to look at the knob on it and it was on the 225amp 12v quick start and it got something under the dash. i was pissed when i bench tested the starter and it worked.

[quickdodge®]

What Does Your Engine Bay Look Like?Post-em

If you insist. Lolol. My '79 Accord EK1 engine in my 79 Civic. Maybe I should get someone to paint the VC up, huh? Lolol. Later, QD.

[southside]

at least your not as bad off as me I found out I have a DA harness threw out my engine and dash.Then bad part is they spliced it left and right.

[CBEeng.]

at least your not as bad off as me I found out I have a DA harness threw out my engine and dash.Then bad part is they spliced it left and right.
thats weird.

[southside]

thats weird.Yea I guess they was trying to do it the easiet way:thinking: but it ended up being the hardest in the end.:(

[CBEeng.]

sorry to get OT but is your cage welded in or is it bolt in?

[southside]

sorry to get OT but is your cage welded in or is it bolt in?welded I believe

[CBEeng.]

welded I believe

oh u know who did it im looking for a affordable (notice i didnt say cheap) cage

[JDMJAYDC2]

mainstream does affordable cages i would shoot them a pm for a quote

[southside]

mainstream does affordable cages i would shoot them a pm for a quoteSomeone on here had a bolt in cage for like 90$,I forgot who it was though

[00CelicaGT]

sorry to get OT but is your cage welded in or is it bolt in?

:thinking:
r u asking me. if so i have a bolt-in 6pt. rollcage that is Tig welded into 3 sections and uses sleaves to bolt them together.

mainstream is not a cheap a jay makes it sound. i asked them wat they would charge me to do a weld-in 6pt. with door bars thats SCCA/NASA certified. they told me $2,600. which is not that bad... it's a little high but not too bad.

i called this place in marrietta that specializes in buiding rollcages for SCCA/NASA, they quoted me $1,800 for labor & $300 for materials out the door. for the same style cage. im not bashing mainstream cuz i've seen Turbo Daves work in-person and it's great craftsmanship, but im just letting u know there are better deals out there.:goodjob:

if ur not going to be compeating in drag or road racing i would suggest u get the cusco bolt-in cage if ur just going for looks. but it's not the best cage for safty purposes. the bolt-in i have was build for competition and safty by the pervious owner and his dad who has been a metal fabricator for over 35+ years.

[CBEeng.]

:thinking:
r u asking me. if so i have a bolt-in 6pt. rollcage that is Tig welded into 3 sections and uses sleaves to bolt them together.

mainstream is not a cheap a jay makes it sound. i asked them wat they would charge me to do a weld-in 6pt. with door bars thats SCCA/NASA certified. they told me $2,600. which is not that bad... it's a little high but not too bad.

i called this place in marrietta that specializes in buiding rollcages for SCCA/NASA, they quoted me $1,800 for labor & $300 for materials out the door. for the same style cage. im not bashing mainstream cuz i've seen Turbo Daves work in-person and it's great craftsmanship, but im just letting u know there are better deals out there.:goodjob:

if ur not going to be compeating in drag or road racing i would suggest u get the cusco bolt-in cage if ur just going for looks. but it's not the best cage for safty purposes. the bolt-in i have was build for competition and safty by the pervious owner and his dad who has been a metal fabricator for over 35+ years.
im a ricer i just want a bolt in for looks now. later i do a cert. cage

[LIKEG6]

lol everyone has some ricer in them

[green91]

im a ricer i just want a bolt in for looks now. later i do a cert. cage

An improperly designed/installed cage is more dangerous than not having one.. dont risk your life over trying to look cool. Id much rather have the satisfaction of knowing that a cage in my car would actually protect me in a rollover.

[00CelicaGT]

An improperly designed/installed cage is more dangerous than not having one.. dont risk your life over trying to look cool. Id much rather have the satisfaction of knowing that a cage in my car would actually protect me in a rollover.

^^^x2:goodjob:

but if u just want the look. i think u can pick up a Cusco 4pt for like $600+shipping and a 6pt for $900+ shipping. i found them on a website a while back, but i dont think i saved it to my favorites. if i find it i'll post the elink here.

[green91]

http://www.halffastmotorsports.com/gallery/albums/userpics/P1010009.JPG
:ninja::ninja::ninja::ninja:

[southside]

I was about to say what kinda car is that^^^

[green91]

New project that had a very leaky rear main seal!

[southside]

LOL 4wd?

[green91]

AWD

[southside]

4WD> AWD haha

[green91]

my cars > your cars

[00CelicaGT]

my cars > your nike's

FIXED:goodjob:

[LIKEG6]

Newest pic I have. Finally made a mount for my radiator and moved my MAP sensor assembly

http://c3.ac-images.myspacecdn.com/images02/15/l_429c461996c04f9696c20e4927910046.jpg

[southside]

Nikes>Zc:goodjob:fixed

[green91]

fixed
:thinking::thinking::thinking::thinking::thinking: :thinking::thinking::thinking::thinking::thinking: :thinking::thinking::thinking::thinking::thinking: :thinking::thinking::thinking::thinking::thinking: :thinking::thinking::thinking:

[j99fbody]

here is a couple of my engine bays

http://i78.photobucket.com/albums/j111/j99fbody/100_1627-1.jpg
http://i78.photobucket.com/albums/j111/j99fbody/100_2407.jpg

[southside]

^^^NIce

[EvasiveEF9]

2nd picture = corvette motor...
car = .....?

[j99fbody]

2nd picture = corvette motor...
car = .....?

1972 pontiac firebird

[Athens_Red_Rexin]

Here are some recent pics of mine. :goodjob:

http://i34.tinypic.com/29av6te.jpg

http://i36.tinypic.com/1zd2lhz.jpg

[southside]

^^^
Pics of said car?

[green91]

http://www.halffastmotorsports.com/gallery/albums/userpics/P1010001.JPGThis is an older pic.

[SL65AMG]

yall makin me jealous....

[southside]

^might as well get in!

[SL65AMG]

^might as well get in!

get in what?



do i get the dirtiest pos engine bay award???

[Papa_Smurf]

thats a big 10-4 cowboy

[southside]

get in what?



do i get the dirtiest pos engine bay award???LOL nothing a little purple power and a sponge wont fix

[SL65AMG]

thats a big 10-4 cowboy

lol yeah i figured.


i havent had the desire to do much to my car because it just frustrates the shit out of me. theres so much shit i gotta fix and the interior rattles and drives me nuts. the paint is horrible..... oh well.... the to do list i guess....

the only thing ive done is the exhaust.....(mod wise)


i like the wire tucks ive been seeing. they difficult or do they just take a while??

[LIKEG6]

Just time consuming mainly

[jmmx258]

I did my headlight tuck in about 3 hours tops and another few getting everything situated inside the car for my tuck. For my power cables I have a Ground Plate, that I screwed to the bottom of my heater box and now bolt those to.

Fuse box, mounted kind of behind the fan box.

Map sensor assembly, is mounted to the box beside the distribution plate.


Well it was then I started tearing it apart again lol.

[MrBoostedCRX]

BEFORE


http://a316.ac-images.myspacecdn.com/images01/105/l_3cde8260c441bd43120e83cba1b5d72b.jpgAFTER -http://c4.ac-images.myspacecdn.com/images02/13/l_b69045b5ec1c48a2a39e72e26ef8aa7b.jpgRebuilt DOHC ZC, bought it with 10k miles!

[Nashville]

all i need is my header to start it.

http://i178.photobucket.com/albums/w253/richietn/IMG_3646.jpg

[bruceracing]

^ lol if you guy's havnt seen his pics thread, yall need 2 go check it out.

[Nashville]

lol i just realized that it was a ef thread. my bad

[bigdare23]

Its cool Nashville.

[MrBoostedCRX]

get in what?



do i get the dirtiest pos engine bay award???

ill help u clean your bay! no joke!

[JDMJAYDC2]

looking good fellas keep it up

[EuroTra$h]

ill help u clean your bay! no joke!

wnna help me clean mine ? lol:goodjob:

[SL65AMG]

ill help u clean your bay! no joke!

thx for the offer man. ill keep that in mind but a clean engine bay is the least of my problems right now. you ever done CV joints on a crx (... or any EF). i need to get that done whenever i start working again, maybe you wanna help? lol

[MrBoostedCRX]

we could google it and see if its hard to do the CV joints lol..

[southside]

^^^Its not hard at all

[Formally...]

Here are a few of my 4dr. It will be painted black and cleaned up when the new motor goes in. D16A6 bottom end, D16Y7 head, 220whp @9psi

http://i250.photobucket.com/albums/gg250/mainstreamperf/car%20stuff/picture22210.jpg

http://i250.photobucket.com/albums/gg250/mainstreamperf/car%20stuff/picture22211.jpg

GT28R turbo with a/c and p/s. It's tight but I haul my 2 kids around in this so I gotta keep it comfy.
http://i250.photobucket.com/albums/gg250/mainstreamperf/car%20stuff/picture22212.jpg

[MrBoostedCRX]

^^^Its not hard at all

so hell him!

[SL65AMG]

^^^Its not hard at all

i didnt think it was. it seems pretty straightforward.

[SL65AMG]

Here are a few of my 4dr. It will be painted black and cleaned up when the new motor goes in. D16A6 bottom end, D16Y7 head, 220whp @9psi




why use an A6 bottom end and a Y7 head? the Y7 is VTAAAKKK(right?) but does the bottom end have higher compression???

[Formally...]

why use an A6 bottom end and a Y7 head? the Y7 is VTAAAKKK(right?) but does the bottom end have higher compression???

I had a straight A6 that was in a hatch but a little too much NOS :D and it overrevved and bent a valve. I had the Y7(nonvtec) head laying around so I used it. The z6, y7,y8 heads have 1mm larger valves and this setup is about 10.3:1 compression. Good throttle response and good power with less boost.

[SL65AMG]

I had a straight A6 that was in a hatch but a little too much NOS :D and it overrevved and bent a valve. I had the Y7(nonvtec) head laying around so I used it. The z6, y7,y8 heads have 1mm larger valves and this setup is about 10.3:1 compression. Good throttle response and good power with less boost.

gotcha :goodjob:

[mushroom_toy]

:ninja::ninja::ninja::ninja::ninja::ninja:

http://img.photobucket.com/albums/v28/JubeiMunchCurry/More%20Car/DSC07787.jpg
http://img.photobucket.com/albums/v28/JubeiMunchCurry/More%20Car/DSC07059.jpg
http://img.photobucket.com/albums/v28/JubeiMunchCurry/More%20Car/DSC07063.jpg

[EuroTra$h]

dude im lovin that car so much

[sakasaku]

what kind of intercooler is that? and what are the dimensions?

here's mine:

http://i72.photobucket.com/albums/i191/carkbunnie420/IMG_0170.jpg

http://i72.photobucket.com/albums/i191/carkbunnie420/IMG_0171.jpg

ugly :(



Hey alan nice ls swap! :goodjob:

lololololololol u remember?






i know its a zc

[mushroom_toy]

dude im lovin that car so much

Thanks man.

[Thundercat]

Ivory http://i95.photobucket.com/albums/l129/KrazyK116/ef/1119781.jpg

[Thundercat]

here's another one http://i95.photobucket.com/albums/l129/KrazyK116/ef/3030590.jpg

[JDMJAYDC2]

what is that ?^^^^^ also what kind of mounts are you using looks like its sitting a bit higher than mine does im using hasport

[Thundercat]

hasport mounts and i did have to use 5 washers on both sides and i cut the lining of the hood some as well....i really need a CF zc hood

[southside]

Just a lil Tease
http://i209.photobucket.com/albums/bb148/corey20072007/027_.jpg
http://i209.photobucket.com/albums/bb148/corey20072007/bay2.jpg

[sakasaku]

mine
http://i268.photobucket.com/albums/jj20/sakasaku/4160_1168633898989_1322191099_30439.jpg

[southside]

Mine again
http://i209.photobucket.com/albums/bb148/corey20072007/SDC10745.jpg
http://i209.photobucket.com/albums/bb148/corey20072007/SDC10744.jpg

[PURP]

:ninja:

http://i156.photobucket.com/albums/t1/techadwick721/008-4.jpg

[Thundercat]

eg...lol

[B18C5-EH2]

Just throwing this out there FYI:

There are thieves that browse this forum, and I know of at least one person in this very topic that associates with proven/known thieves. I have seen users in the EF and EG sections that undoubtedly associate with a thief that was caught red handed with a stolen engine, transmission, and other associated parts on his Civic.

What I'm saying is that be careful when you show off what people normally can't see - it's somewhat of a "shopping list" for thieves.

[southside]

Just throwing this out there FYI:

There are thieves that browse this forum, and I know of at least one person in this very topic that associates with proven/known thieves. I have seen users in the EF and EG sections that undoubtedly associate with a thief that was caught red handed with a stolen engine, transmission, and other associated parts on his Civic.

What I'm saying is that be careful when you show off what people normally can't see - it's somewhat of a "shopping list" for thieves.:goodjob: So true.

[JEY$JDM]

LOL
Here is my beast!
Looks how it did basically when brad posted it.....
SRY-kinda shitty pic.....
http://i48.photobucket.com/albums/f226/pixieshaven154/ED6_bia.jpg

[EF-9]

Just throwing this out there FYI:

There are thieves that browse this forum, and I know of at least one person in this very topic that associates with proven/known thieves. I have seen users in the EF and EG sections that undoubtedly associate with a thief that was caught red handed with a stolen engine, transmission, and other associated parts on his Civic.

What I'm saying is that be careful when you show off what people normally can't see - it's somewhat of a "shopping list" for thieves.

x2!!! thats why i dont like posting pics of my car.

[N/A EK]

My first EF (built d16a6)
http://i657.photobucket.com/albums/uu299/DB8gsrr/100_2847.jpg

When she was done, but no pic's of the b16a :(
http://i657.photobucket.com/albums/uu299/DB8gsrr/eff1.jpg

2nd EF Si hatch (b16a2)
http://i657.photobucket.com/albums/uu299/DB8gsrr/101_0417.jpg
http://i657.photobucket.com/albums/uu299/DB8gsrr/101_0418.jpg
http://i657.photobucket.com/albums/uu299/DB8gsrr/101_0420.jpg

b20 DA, dont have better pic's
http://i657.photobucket.com/albums/uu299/DB8gsrr/101_0236.jpg
http://i657.photobucket.com/albums/uu299/DB8gsrr/101_0227.jpg

05 SE-R SpecV
http://i657.photobucket.com/albums/uu299/DB8gsrr/specv3.jpg
http://i657.photobucket.com/albums/uu299/DB8gsrr/specv2.jpg

94 DB8
http://i657.photobucket.com/albums/uu299/DB8gsrr/gsr8.jpg
http://i657.photobucket.com/albums/uu299/DB8gsrr/gsr1.jpg

98 EK hatch coming soon...:ninja: