PDA

View Full Version : sounds dumb



Nateds16
12-20-2008, 07:36 PM
gone

Barefoot
12-20-2008, 07:41 PM
dont know if this is the right place to ask this how much could i get for a d15b2 with a extra mani for obd1 and dizzy(obd1 non vtec) and pm6 ecu i redid the head machine it when it blew a head gasket and the piston rings need to be done easy fox thats all that is wrong with it have receipts in my hatch for it extra gaskets have to find them please pm with answers and i dont want to be ripped off please tring to help out my parents with money



if this is in the wrong place please move it idk where to put it :???:
im not big on grammer. i dont spell good use commas or anything like. i do use periods and try to make shit readable.
anyways u might to post it in the f/s section with testing waters or TW next to it and see what offers u get. if i was to give u an offer id 100 if its disassembled and 200-300 if its running and ready to go.

Tech5
12-20-2008, 07:46 PM
Can you RE_READ what you typed and fix it , I also can't understand what you just said!

Nateds16
12-20-2008, 08:26 PM
yeah im half asleep sorry

Tech5
12-20-2008, 08:33 PM
^^ Next time wait until you wake up thanks

allmotoronly
12-20-2008, 08:35 PM
periods. Commas. USE THEM.

Nateds16
12-20-2008, 08:37 PM
is it better lol

Tech5
12-20-2008, 08:41 PM
Alittle better ,the first time looked like a 2 year old typed it .Now it looks like a 5 year old typed it .

But I think your asking what's the Value of your motor ?

With needing to have Piston rings replace,which has to be Honed,Hot tanked,and all new bearings and the Head needs to be shaved again an all new gaskets!

I would say a fair an honest Value is 50-100 bucks tops

I can get Z6 running for 150


So a NON Vtec needing rebuilt isnt going to bring you top dollar!

allmotoronly
12-20-2008, 08:41 PM
It's a little better. To answer your question, if the engine runs good and doesn't have any major problems, you should be able to get a few hundred dollars for it...

Tech5
12-20-2008, 08:48 PM
It needs to be rebuilt an its a NON Vtec you can buy these all day running like a top for 100-150 tops
It's a little better. To answer your question, if the engine runs good and doesn't have any major problems, you should be able to get a few hundred dollars for it...

Nateds16
12-20-2008, 08:51 PM
sorry man. I've been up for to long. Thanks for calling me a 2 and 5 year old real nice. The head doesn't need to shaved everytime it comes off. All you have to do is get something flat and sand the block and head evenly to made a good seal. right or wrong

Tech5
12-20-2008, 08:56 PM
To be honest if I was to buy this which I am not. I would go threw it from head to toe before installing this in my car knowing something was wrong from the Get Go.I would send the head off to have it Decked an Checked an cleaned, same for the block I would get it MagnaFluxed and X rayed and cleaned an honed. Then I would have the Rods checked and crank.Once that is all done I would do all new gaskets by all this time an money I would be better off buying a Used Z6/ZC running without any issues for 150 bucks...


Your motor will never come close getting a few hundred dollars like the EFALLMOTOR guy said, even with your problems you want see more then 100 bucks

sorry man. I've been up for to long. Thanks for calling me a 2 and 5 year old real nice. The head doesn't need to shaved everytime it comes off. All you have to do is get something flat and sand the block and head evenly to made a good seal. right or wrong

Nateds16
12-20-2008, 08:57 PM
I mean i could be an ass and not tell people that there is something wrong with it. And im not going to go back and forth about spelling and stuff okay.

thank you for your help

Nateds16
12-20-2008, 09:00 PM
but like you said its a d15 why put money in it and its in the car and you can test drive it you just have to put oil in it no knocking no nothing

Tech5
12-20-2008, 09:00 PM
Yeah an for that comment I have stickie this thread to my (PM) and will remember that if you happen to ever try an sell this on IA! or any other forums that I might be on with you too....


I hope you was joking about that!

Karma is a Bitch.

That is why many of us don't buy/sell anything off IA anymore because of shady shltt like that!

I hope you get Banned from that comment, we (IA) Don't care for anyone that is Shady and liar's

I mean i could be an ass and not tell people that there is something wrong with it. And im not going to go back and forth about spelling and stuff okay.

thank you for your help

Nateds16
12-20-2008, 09:05 PM
yeah but im an honest person and you can say what you want i dont sell motors untill people test drive them and i might have just put the timing off a little why are you getting so upset about this lol come on

Tech5
12-20-2008, 09:06 PM
Timing off alittle will never make it burn oil!
yeah but im an honest person and you can say what you want i dont sell motors untill people test drive them and i might have just put the timing off a little why are you getting so upset about this lol come on

Nateds16
12-20-2008, 09:08 PM
you never know im redoing the timing tomorrow and im not going to lie to someone

Tech5
12-20-2008, 09:20 PM
You honestly think the timing would make it burn oil?


If you do you have to be the Dumbest person ever!

I do know ! This is what i do for aliving!

you never know im redoing the timing tomorrow and im not going to lie to someone

Nateds16
12-20-2008, 09:26 PM
So that would make my dad, a master mechanic, a dumbass. He has worked for Ford, Chevy and Honda, since you were in diapers. Look you are making a big deal of nothing. You do not know who I am as a person. I let people know when stuff is broken on ANYTHING and EVERYTHING I sell. I am not going to cheat or lie about it because it would be stupid to. You are 27 and fighting over something childish. I might be wrong about the reason why the oil is burning but there is nothing else wrong with the car. Unless the dude I bought it from on here lied to me about how long he drove it with a blown head. Am I still a 2 year old?

Tech5
12-20-2008, 09:29 PM
With your Typing yes your 2 years old lol...

If your dad said that the timing is off an that is causing it to burn oil then yes he is a Dumbass....


I am not making it a big deal until you came off saying you could say nothing is wrong with it an sell it to someone!

Nateds16
12-20-2008, 09:32 PM
hmmmmm

Nateds16
12-20-2008, 09:35 PM
"I mean i could be an ass and not tell people that there is something wrong with it." Re-read. There is a big difference between COULD and WOULD.

Tech5
12-20-2008, 09:38 PM
But did you say that you could but wouldnt?


Anyway The timing will NOT make it burn oil I dont care who you think your dad is, If the timing was so far off it wouldnt even run an idle right, being a tooth off isnt going to make it burn oil ...I am not NEW to this by all means

"I mean i could be an ass and not tell people that there is something wrong with it." Re-read. There is a big difference between COULD and WOULD.


If the timing is off a little or set the wrong way, it can draw oil through the piston rings. It is worth taking the chance by fixing the timing, rather than taking the WHOLE engine apart. Like I said I am trying to get some money to help out my parents.

this sounds like a Old man, young son would say!

Not ASE by all means . I think your dad has lied to you saying he knows what the hell he is saying to you .

Ask him if he can put a Heater core in a 63 beetle too please

Nateds16
12-20-2008, 09:47 PM
There is no such thing as a heater core for a 63 beetle. It ran off the exhaust manifold. They do not have water so they do not have a heater core. Until the jettas came out they put heater cores on them since the had water in them.

Tech5
12-20-2008, 09:48 PM
GOOGLE FTW!


GTFO!

There is no such thing as a heater core for a 63 beetle. It ran off the exhaust manifold. They do not have water so they do not have a heater core. Until the jettas came out they put heater cores on them since the had water in them.

Nateds16
12-20-2008, 09:51 PM
hmmmmmmmmmmmmmmm

Tech5
12-20-2008, 09:53 PM
Meaning your RINGS ARE FUKED!
It only smokes at 2000 RPM and up. It does not smoke when it idles. The valves do not open up until high RPMs; so as the pistons move down it pulls a vaccum through the cylinders which pulls oil through the rings.

Nateds16
12-20-2008, 09:53 PM
Google my ass

Nateds16
12-20-2008, 09:54 PM
Like I said, there could be a chance but I do not want to take the motor apart before I check the timing.

Tech5
12-20-2008, 09:56 PM
Heater core Beetle saying is old as fuk even my wife an mom knows that saying!

still funny!


Also Go ahead an check your timing an check your push rods too! lmao!

And check your blinker fluid I hear that might cause burning of oil too!


Oh might wanna check your air in the spare tire I hear that also can cause a burning of oil!

Nateds16
12-20-2008, 09:57 PM
Look I just asked a simple question and I got my answer thank you for your help. I did not think I was going to get into an argument over something silly.

Tech5
12-20-2008, 09:57 PM
Before I do all of that check the dumbass behind the wheel an replace him with a REAL ASE TECH! lmk if you need one,
I have one right here

<
<
<
<
<
<

Nateds16
12-20-2008, 10:02 PM
Heater core Beetle saying is old as fuk even my wife an mom knows that saying!

still funny!


Also Go ahead an check your timing an check your push rods too! lmao!

And check your blinker fluid I hear that might cause burning of oil too!


Oh might wanna check your air in the spare tire I hear that also can cause a burning of oil!

You can laugh all you want it does not bother me. I was just trying to get some help from other members. By arguing with me you just made yourself look dumb.

Nateds16
12-20-2008, 10:04 PM
If you know so much. What is the difference between a 74 mustang and a 74 capri 2000 engine? Why does one have 10 more HP over the other?

Tech5
12-20-2008, 10:05 PM
thank you



I gave you honest answers to your question after I read your question about 300 times trying to understand what the hell you wanted to ask....

So my job is done here!
Go check that timing,air in the spare tire,blinker fluid and you will be set for another 10 miles before your motor blows up...best of luck!

You can laugh all you want it does not bother me. I was just trying to get some help from other members. By arguing with me you just made yourself look dumb.

Nateds16
12-20-2008, 10:10 PM
The capri had a one tooth advance over the mustang. Since you did not answer you do not know all what you say you do. So do not bad mouth me or my father.

dabuilding
12-20-2008, 10:16 PM
this thread is full of fail lol but funny

Nateds16
12-20-2008, 10:17 PM
lol Glad you liked it..........

Tech5
12-20-2008, 10:19 PM
Mustang an a Honda are two different cars that can't be compared too!


and many people almost all can Vouche an knows me , will tell you I do know what I am talking about!

If you don't want to be bad mouth , or your dad don't say anything that will make you two look stupid like saying the timing off in a honda will make it burn oil, then you might not get your feelings hurt.

This is a car forum an 90% of the members knows about there hondas an imports and do more research then you do , you havent been on IA as most others so don't try to come off that you know more then some off us that do and is trying to help and telling you , what to do or try...I know you will be wasting your time, and by the sound of it I don't think you should be checking the timing , you and your dad might make it worse. BTW this isnt like a Mustang

The capri had a one tooth advance over the mustang. Since you did not answer you do not know all what you say you do. So do not bad mouth me or my father.

Nateds16
12-20-2008, 10:23 PM
dude all you do is talk crap to make yourself feel better. All cars are just about the same, so dont even have a nice night and leave me the hell alone.

im not going to have a pissing contest with you so move on k.

Tech5
12-20-2008, 10:25 PM
But for some advice on the real

The oil is coming from either worn out valve seals
but sounds more like Piston rings,

just my 0.02 cents do what you want with it ..

Nateds16
12-20-2008, 10:25 PM
Now lets act like grown men and stop this crap.

Tech5
12-20-2008, 10:26 PM
All cars are the same?

So a Kia is the same as a chevy?

Nateds16
12-20-2008, 10:31 PM
Do not even man. If you know how to work on a car, then you know how to work on all. Give or take a couple things. Even a guy at honda and acura specialist told me that that it could be it. Since, it did not smoke at ilde. So call him and tell him he is a dumbass too.

9ussy
12-20-2008, 11:57 PM
chill..

Barefoot
12-21-2008, 12:24 AM
sseriously did yall just take this out 3 pages.

Tech5
12-21-2008, 12:18 PM
Do not even man. If you know how to work on a car, then you know how to work on all. Give or take a couple things. Even a guy at honda and acura specialist told me that that it could be it. Since, it did not smoke at ilde. So call him and tell him he is a dumbass too.

The reason its smoking when your RPMS are high is because its pushing more compression in the cylinders ...There for with weak,bad rings it causes it to smoke!


And yes your guy you know from Honda & Acura is a Dumbass too...BTW tell him to ge back to changing oil before I fire him!

Barefoot
12-21-2008, 12:24 PM
Do not even man. If you know how to work on a car, then you know how to work on all. Give or take a couple things. Even a guy at honda and acura specialist told me that that it could be it. Since, it did not smoke at ilde. So call him and tell him he is a dumbass too.bullshit i can work on hondas any comman car all day. i cant work a rx7 or a ferrari.

Tech5
12-21-2008, 12:28 PM
Thank yoU!


bullshit i can work on hondas any comman car all day. i cant work a rx7 or a ferrari.


This guy made my Night last night!

If he or his dad was soooo Smart and knew what they was doing then why did he come in here and ask a question?

Being a ASE Certified Mechanic as myself I know what Values of items are!

We order an buy everyday!


Tells me his DAD that post to be a EX-Honda Tech don't know his stuff. He needs to go back to school or something I dunno.But From the sound of it , his dad might be a top notch Mcdonalds Manager but at home he claims to be a Mechanic.Just my :2cents:

Barefoot
12-21-2008, 12:30 PM
lol smalls im going to have to go back and read yalls battle and caught up.

Tech5
12-21-2008, 12:36 PM
lolololol..................

punkr6
12-07-2009, 03:31 AM
sseriously did yall just take this out 3 pages.

LMAO, Josh you must have been bored, how did I miss this.....:lmfao:

Tree
12-07-2009, 03:34 AM
If the timing is off a little or set the wrong way, it can draw oil through the piston rings.

does anyone remember this stupid quote??

dallasb84
12-07-2009, 04:27 AM
i tank dat der mowter word nadda cint mer dan tree fiddy

DC2NR
12-07-2009, 12:42 PM
I dont get it. You know all that information, yet you don't know what a shitty d15 is worth? I guess google didn't help you with that.

Sir_Christopher
12-07-2009, 01:36 PM
well ill be dipped..... a thread about a 100$ testing water thread turned in to an explosive battle of witts, we should have a movie made about this.... crazy shit i say

Tree
12-07-2009, 01:41 PM
well i found out how to fix my motor burning oil... i just need to retard my timing

dallasb84
12-07-2009, 01:42 PM
i think op needs to advance from retarded