View Full Version : ITR transmission
j0natell0
12-20-2008, 11:29 AM
k i got a itr transmission and it grinds in third gear.. alot of people told me about the GM syncromesh and thats what im planning on getting.. but someone told me i have to mix it with something else? :thinking: and how many quarts will i need?
also it is kind of hard for me to get in first gear now and im thinkin its the short shifter. personally i dont like the short shifter and i wanna change it back to normal.. wat all would i need?
Benefit
12-20-2008, 12:29 PM
3 quarts, i never heard about mixing it
Captain-Obvious™
12-20-2008, 01:07 PM
buy any b series shifter and change that bish...it's easy as pie
j0natell0
12-20-2008, 01:21 PM
3 quarts, i never heard about mixing it
yea me neither. its 20 a quart so 60 bucks shiit.
j0natell0
12-20-2008, 01:24 PM
buy any b series shifter and change that bish...it's easy as pie
i can use the same bolt thats on it right now?
Vteckidd
12-20-2008, 01:30 PM
its actually 2.4 QTs, you can find GM Synchro mesh for much cheaper than $20 a quart. Its usually $8-11 online.
make sure you buy the LSD Friction Modifier to go with it.
If its a SLIGHT Grind, it will be better, but if its grinding it means there is damage, and eventually you will have to fix the synchro.
j0natell0
12-20-2008, 01:51 PM
make sure you buy the LSD Friction Modifier to go with it.
is that wat the guy was talkin about mixing it?
Vteckidd
12-20-2008, 01:51 PM
yes prob
j0natell0
12-20-2008, 02:03 PM
k thnx all. ima get that done this weekend.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.