PDA

View Full Version : <<<Official Columbus, GA Discussion Thread>>>



Pages : [1] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55

LIKEG6
12-16-2008, 07:50 PM
Since the Columbus Meet thread started getting kind of big then I decided to make our own thread to talk since we are kinda spread apart on the forum. I have been trying to bring Columbus a little more together with the cook out I held and with starting the Columbus meets.

Everyone feel free to discuss whatever ya want here. Anything to do with "racing" take it to pm's please.

Thanks everyone.

:cheers:

**Mods if this needs to be moved to another section then feel free. I would have put it in the whores lounge but it moves too fast**

h23bb2
12-16-2008, 08:51 PM
I'm the first to post behind Brooks!!!
I'm lame.

LIKEG6
12-16-2008, 09:10 PM
lol

Good idea?

h22ek
12-16-2008, 09:48 PM
Great idea brooks

bigdare23
12-16-2008, 10:00 PM
Columbus is lame as hell!

LIKEG6
12-16-2008, 10:02 PM
HEY, HEY, HEY























.....we already know without you adding insult to injury.


I got somethin for you friday night

LIKEG6
12-16-2008, 10:04 PM
Great idea brooks


I thought so lol

bigdare23
12-16-2008, 10:07 PM
HEY, HEY, HEY























.....we already know without you adding insult to injury.


I got somethin for you friday night



LOL, you know I have love for the C-Town!!! :bigok:

Looking forward to seeing you on Friday!

LIKEG6
12-16-2008, 10:09 PM
Yea as boring as it is I still love it haha. If I moved I dunno what I would do.


Hell yea man, me too!!

-S Double C-
12-16-2008, 10:18 PM
anyone know if any 12/13 sec cars might be out friday im itching for some fun.

LIKEG6
12-17-2008, 06:34 AM
You know the only place that will be at

I saw 2 red evo's parked in winn dixie parking lot on milgen last night. Don't think I've really seen 2 evo's in one place here. Both looked stock but one had a small spoiler.

ash7
12-17-2008, 08:45 AM
I'm the first to post behind Brooks!!!
I'm lame.
how is your engine replacement coming along bro?

-jonathan

-S Double C-
12-17-2008, 10:16 AM
yeah the one with the small wing lives by me it's stock but GOD i love it i tryed ti get him to sell it to me.

LIKEG6
12-17-2008, 10:26 AM
Yup I like the older evo's better than the new

cactusEG
12-17-2008, 10:27 AM
Columbus is the shit ! I love living here...

LIKEG6
12-17-2008, 10:29 AM
Columbus is the shit ! I love living here...

lol

Did you move to columbus or somethin?

cactusEG
12-17-2008, 10:32 AM
lol

Did you move to columbus or somethin?

LOL i'm fucking with u guys. I dont live there, or even close...

LIKEG6
12-17-2008, 10:33 AM
LOL i'm fucking with u guys. I dont live there, or even close...


haha didn't think so

h22ek
12-17-2008, 11:31 AM
columbus is getting better, just verrrrrry slowly

ash7
12-17-2008, 11:39 AM
^ i hope you're using the word "better" in a loose sense Eli.

-jonathan

h23bb2
12-17-2008, 01:46 PM
how is your engine replacement coming along bro?

-jonathan

ThanX for asking.
I haven't been fooling with it since finals were this week. I do have everything I need waiting on me when I get home from my last one tomorrow afternoon so it WILL BE running by midnight (weather be damned) lol :cheers:
I should be out and about saturday night.

LIKEG6
12-17-2008, 03:37 PM
ThanX for asking.
I haven't been fooling with it since finals were this week. I do have everything I need waiting on me when I get home from my last one tomorrow afternoon so it WILL BE running by midnight (weather be damned) lol :cheers:
I should be out and about saturday night.

sounds good bro

h22ek
12-17-2008, 06:34 PM
^ i hope you're using the word "better" in a loose sense Eli.

-jonathan

Haha yeah, :(

LIKEG6
12-17-2008, 07:13 PM
lol

Sean I'm gonna need to see a dyno sheet for your 400hp and Zach's xxxhp

-S Double C-
12-17-2008, 08:24 PM
lol my car is in pieces you didnt read my forsale thread? hole in wastegate line 28lbs and pump gas=boom Ill have new one around febuary. As for Zach's i dont believe scotty gives out dyno sheets you have to pm him and get em. I know he didnt give kendahl one or here brother the 3 times he tuned his car.

h23bb2
12-17-2008, 08:32 PM
Are you serious? What's the point in that?

-S Double C-
12-17-2008, 08:35 PM
Are you serious? What's the point in that?

it's gay if you ask me. He told my buddy brandon he had to go on some website or some crap and find it and print it off himself.

hondalover00
12-17-2008, 08:47 PM
i can ask scotty for one....ill let you know what he says.......

hondalover00
12-17-2008, 08:49 PM
by the way brooks....i thought that this thread was a good idea.:bump:

LIKEG6
12-17-2008, 09:48 PM
lol me too bro

h22ek
12-17-2008, 11:30 PM
when i went to dyno day at mainstream last year they dynoed mine and gave me a print out right after.

-S Double C-
12-18-2008, 04:47 PM
mainstream and scotty is two different people lol

LIKEG6
12-18-2008, 10:11 PM
What is everyone doin this weekend?

h22ek
12-18-2008, 10:46 PM
mainstream and scotty is two different people lol

oh i know i was just saying that mainstream will give you a print out.


but to brooks last post -i wanna meet up this weekend at some point, ride around or something.

ash7
12-19-2008, 12:37 AM
I'll be spending most of Saturday in the garage replacing valve stem seals most likely.

I'm sure I'll be running around town at some point.

-jonathan

LIKEG6
12-19-2008, 08:25 AM
oh i know i was just saying that mainstream will give you a print out.


but to brooks last post -i wanna meet up this weekend at some point, ride around or something.

Sounds good. Tonight I will be in Atlanta at the EFsquad meet. Saturday I don't have any plans.


Have fun with that Jonathan

-S Double C-
12-19-2008, 10:19 AM
What is everyone doin this weekend?
Well im tired of playing halo all the time on the weekends so i might go beat up on whatever i can find out crusing. Im down to ride around if anyone wants too.

h22ek
12-19-2008, 12:10 PM
Well im tired of playing halo all the time on the weekends so i might go beat up on whatever i can find out crusing. Im down to ride around if anyone wants too.

ok saturday or tonight maybe we can meet up with some people, my cell is 706-580-6644. Sean what are you driving now? and in all seriousness i wanna see your buddy's car, so if you head out get him to come I wanna see that wild ass setup lol. I dont think its gonna rain until sunday so if he can't rock a hood he should be straight lol

ash7
12-19-2008, 01:11 PM
Sounds good. Tonight I will be in Atlanta at the EFsquad meet. Saturday I don't have any plans.


Have fun with that Jonathan

I'm gonna be in atlanta tonight brooks. where is the meet at again? lol i might have to perpetrate the ej8
. ;)

-jonathan

LIKEG6
12-19-2008, 02:31 PM
off of roswell road at applebees

address in the ef squad section

ash7
12-19-2008, 02:34 PM
oh goodness, nevermind. lol I was gonna be downtown taking care of some stuff for work. :goodjob: make sure to take pics!

-jonathan

-S Double C-
12-19-2008, 02:56 PM
ok saturday or tonight maybe we can meet up with some people, my cell is 706-580-6644. Sean what are you driving now? and in all seriousness i wanna see your buddy's car, so if you head out get him to come I wanna see that wild ass setup lol. I dont think its gonna rain until sunday so if he can't rock a hood he should be straight lol

Ive got a boosted 4 door integra thats silver and a Red Boosted Ef. Im not sure if Zach got his new head on or not? He wasnt at work today and my phone is screwed up so im switching services the 1st.

h22ek
12-20-2008, 01:22 PM
Oh ok

LIKEG6
12-20-2008, 04:50 PM
Well I will be chillin at the house tonight

Probably won't come out at all

h22ek
12-20-2008, 05:42 PM
I'll be out doing Christmas shopping.

-S Double C-
12-20-2008, 11:54 PM
i went out and no one was out it was gay. Now i see why there's no reason to come out. Id rather sat home and fuck some people up on halo lol!

ash7
12-21-2008, 01:04 AM
I was out for a little bit after 10, drove around with six7teen and norridetoolow for a little bit.

Tried calling you brooks, but you had your phone turned off like a jew. The one night I'm not working and show my face around town... :) figures

-jonathan

LIKEG6
12-21-2008, 10:26 AM
I was out for a little bit after 10, drove around with six7teen and norridetoolow for a little bit.

Tried calling you brooks, but you had your phone turned off like a jew. The one night I'm not working and show my face around town... :) figures

-jonathan


lol well at Luis' house yesterday I dropped my phone in the sewer so I'm attempting to dry it. I had to lean down in the sewer while prather and luis held my feet. hahah It sucked. I didn't get any pics at the meet cause my camera sucks at night. I did get a video tho.

h22ek
12-21-2008, 12:23 PM
i went out at like 12 lol and i saw jonathan for a second before a police office busting some other people for racing i assume told us to leave lol.

ash7
12-21-2008, 12:28 PM
i went out at like 12 lol and i saw jonathan for a second before a police office busting some other people for racing i assume told us to leave lol.

"get in your cars and go!" ...says the cop as he has his hand on his unclipped gun...

Someone keyed that guys blue mustang and he was wanting to file a police report. lol i guess the officer was responding to that call.

-jonathan

-S Double C-
12-21-2008, 01:07 PM
^^^wow that is gay! people come out and there car gets keyed. lol what an epic.

h22ek
12-22-2008, 06:22 AM
ahhg, im leaving to go to work and its 24 degrees, eeesh its fucking cold lol.

LIKEG6
12-22-2008, 06:34 AM
Yea it's freezing this morning. This weather is gettin retarded.

h22ek
12-22-2008, 07:13 AM
80 one day 24 the next, shits wild

h23bb2
12-22-2008, 11:33 AM
damn honda distributors......

h22ek
12-22-2008, 11:39 AM
damn honda distributors......

Lol I don't get it :thinking:

h23bb2
12-22-2008, 11:53 AM
I get my car all back together and its fine. I start driving to work and it just dies about a quarter mile from my house. I had to push it mome in the FREEZING cold. lol
My father tok the cap off while I was a work and said it done.
That distributor is a little over a year old.

h22ek
12-22-2008, 03:08 PM
Same exact thing happened to me about a year ago, I was driving then it just felt like i stalled out but i had the clutch in, and it wouldnt start back up, dont exactly know what went bad in it. luckily i had an old used one to pop on and it was fine for about a year,and i just replaced that spare one a couple of weeks ago with a brand new one, but it was still working fine(i just noticed i had a pretty good oil leak under it) but when i removed my dist cap it just poured out oil. so i went ahead and replaced it. I had to get an internal coil though, i found a site that shipped me one for like 209$ so not too bad. theres a seal on the part you stick on the cam and that had worn out letting oil build up in the distributor.

LIKEG6
12-22-2008, 04:23 PM
distributor o-ring is a common leak on honda's

mine went out one day too. I pulled my car in the shop just to fuck around with it and then tried to go home and wouldn't start. Dizzy went out so I jus said fuck it and converted to obd-1.

LIKEG6
12-22-2008, 10:53 PM
So anything else go down last weekend?

h22ek
12-23-2008, 03:52 PM
not that i know of, except that it was lame lol.

ash7
12-23-2008, 04:13 PM
Same exact thing happened to me about a year ago, I was driving then it just felt like i stalled out but i had the clutch in, and it wouldnt start back up, dont exactly know what went bad in it. luckily i had an old used one to pop on and it was fine for about a year,and i just replaced that spare one a couple of weeks ago with a brand new one, but it was still working fine(i just noticed i had a pretty good oil leak under it) but when i removed my dist cap it just poured out oil. so i went ahead and replaced it. I had to get an internal coil though, i found a site that shipped me one for like 209$ so not too bad. theres a seal on the part you stick on the cam and that had worn out letting oil build up in the distributor.

If i remember correctly, your car had a JDM H series distributor on it. :goodjob: that would explain the external coil business.


-jonathan

h22ek
12-23-2008, 05:05 PM
yeah it did so i had to get a jdm dizzy, i just didnt realized there was a difference, i didnt know usdm was external until i went to auto zone lol

All I know is JDM :goodjob:

ash7
12-24-2008, 09:55 PM
*yay for columbus*

*hooray*
-jonathan

h22ek
12-24-2008, 11:35 PM
Haha

hondalover00
12-25-2008, 04:57 PM
merry christmas!!!

ash7
12-25-2008, 08:38 PM
...i think you may actually have the biggest sig on this website...

merry christmas btw.
-jonathan

LIKEG6
12-25-2008, 09:49 PM
lol suprised it hasn't been caught yet

Merry late Christmas

h23bb2
12-26-2008, 12:31 PM
I'm back...
Wasn't the dizzy. Replaced the coil since I wasn't getting a spark from it. Didn't fix it.
Looked at my fuel pressure gauge: 0 fuel pressure. The pump wasn't turning on. Moved some wires around and it turned on.
Turns out, the ground wire on the thermostat was a little loose. Tightened it up and it was good to go.

-S Double C-
12-26-2008, 03:48 PM
^^^cool whos your 1st victim lol

LIKEG6
12-26-2008, 11:05 PM
I'm back...
Wasn't the dizzy. Replaced the coil since I wasn't getting a spark from it. Didn't fix it.
Looked at my fuel pressure gauge: 0 fuel pressure. The pump wasn't turning on. Moved some wires around and it turned on.
Turns out, the ground wire on the thermostat was a little loose. Tightened it up and it was good to go.

I was outside Wendy's by the strip mall tonight and I saw ya drive by. Lookin clean.

h23bb2
12-27-2008, 09:19 AM
no victims wise ass. lol jk
ThanX brooks. the car got filthy last night so a cleaning is in order today or tomorrow.

LIKEG6
12-27-2008, 08:08 PM
Mine did too

-S Double C-
12-27-2008, 09:01 PM
anyone know who drives a gunmetalish colored DC with a JDM Front? Looked like a kid was driving it.

ash7
12-28-2008, 01:48 AM
That's Richard, six7teen's brother.

-jonathan

-S Double C-
12-28-2008, 08:48 AM
Looked decently clean from what i could see. Is it LIL Paki's old car?

LIKEG6
12-28-2008, 08:49 PM
That it is

ash7
12-28-2008, 11:30 PM
...so how about I was walking down the street by the V today and I just saw Sean randomly drive past...

What were you doing downtown man? Lol
-jonathan

-S Double C-
12-29-2008, 12:07 AM
...so how about I was walking down the street by the V today and I just saw Sean randomly drive past...

What were you doing downtown man? Lol
-jonathan

I was suppose to be trading for a ITR swapped teg, but i wasnt to happy with it. Needed to much work. It seems the more people i meet to trade cars the more i realize there's nothing wrong with mine :thinking: . I just hate the two extra doors :( And the weight!

Buttons
12-29-2008, 03:36 AM
*yay for columbus*

*hooray*
-jonathan

you've got to be kidding me.

Dietcoke
12-29-2008, 04:40 AM
Columbus' car scene sucks so hard I don't even come out anymore.

LIKEG6
12-29-2008, 06:46 AM
Me and a few others are trying to change that

ash7
12-29-2008, 08:41 AM
Columbus' car scene sucks so hard I don't even come out anymore.

glad you approve - a sucky car "scene" keeps the thieves away.


I was suppose to be trading for a ITR swapped teg, but i wasnt to happy with it. Needed to much work. It seems the more people i meet to trade cars the more i realize there's nothing wrong with mine :thinking: . I just hate the two extra doors :( And the weight!


aint nothing wrong with two extra doors man.

-jonathan

99jdmLs
12-29-2008, 08:41 AM
Looked decently clean from what i could see. Is it LIL Paki's old car?
Looks clean but it needs work, lol.

takyo_style
12-29-2008, 09:05 AM
hey guys. Me and my buddies are thinking of starting a crew here. you mightve seen Bill's white B18 civic hatch. Im about to get an rsx and build an all motor k20 heehee so hit me up.

ash7
12-29-2008, 09:12 AM
yeah, Bill's b18 hatchback.... hmm, not so much?

-jonathan

-S Double C-
12-29-2008, 01:04 PM
KILL BILL? j.k! I dont have a clue who Bill is? :thinking:

ash7
12-29-2008, 01:32 PM
...sounds to me like it's going to be a great "Crew" with Bill's hatchback and the NA K20 "heehee"

-jonathan

Buttons
12-29-2008, 01:45 PM
Columbus' car scene sucks so hard I don't even come out anymore.

maybe it's the people in columbus that suck so much. call me sometime! i've got some stuff to tell you.

i might have to get surgery soon.

h23bb2
12-29-2008, 02:46 PM
there's alotta ricers and dumbasses, but that makes the cleaner cars look soo much better. I know who Bill is. The white EK hatch with the Megan header that's about 3/4" off the ground. lol Its a nice car

-S Double C-
12-29-2008, 02:54 PM
too much drama now days for me to come out...Ill see everyone at the drag events :goodjob:

h22ek
12-29-2008, 03:15 PM
anyone have any decent 4x100 16's for sale or trade?, im on the hunt for some wheels.

LIKEG6
12-29-2008, 03:58 PM
Dunno a Bill

I still have the baller Niche's lol

-S Double C-
12-29-2008, 04:48 PM
Dunno a Bill

I still have the baller Niche's lol

LOL OLD SKOOLZ!! :crazy:

GetFRESH!
12-29-2008, 06:00 PM
lol @ there being a Columbus thread.






:thinking:...









...:D






C-town's ricer extraordanare checking in for the all the weak ass single cams w00t w00t!!! :bump:

LIKEG6
12-29-2008, 07:55 PM
lol @ there being a Columbus thread.






:thinking:...









...:D






C-town's ricer extraordanare checking in for the all the weak ass single cams w00t w00t!!! :bump:

Us Columbian's must unite :lmfao: :lmfao:

Sean - Old school fa sho!!

LIKEG6
12-29-2008, 07:56 PM
Andrew how many time's do I see you a week now?

ash7
12-30-2008, 01:40 AM
I wasn't even aware that Andrew was still alive! I thought he got swallowed up by teh gyrlfreendz.

-jonathan

Buttons
12-30-2008, 01:47 AM
I wasn't even aware that Andrew was still alive! I thought he got swallowed up by teh gyrlfreendz.

-jonathan

in more ways than one? ;)

GetFRESH!
12-30-2008, 01:49 AM
^^^lulz. I'm still here mang. :yes: I've just been pwned by a bad case of the hermits.


Gah, and I can't sleep tonight.


Damn accidental naps.




I'm hoping my new sig works since the user cp seems to have aids.

GetFRESH!
12-30-2008, 01:53 AM
^Ahhh SUCCESS!:bump:




in more ways than one? ;)

...:ninja:
















:idb: haha.

h22ek
12-30-2008, 07:04 AM
Ahghg what it is Andrew lol.

ash7
12-30-2008, 03:15 PM
what does Ahghg mean Eli?

-jonathan

Buttons
12-30-2008, 05:50 PM
what does Ahghg mean Eli?

-jonathan



I HAVE A FUCKING MOON BOOT ON MY HURT FOOT.

remember how i told you i was on crutches?

ash7
12-30-2008, 11:16 PM
Yes

-jonathan

-S Double C-
12-31-2008, 11:53 PM
HAPPY NEW YEARS COLUMBIANS!! LOL!!

MrTurboCivic
01-01-2009, 10:56 PM
wats up c-town

LIKEG6
01-02-2009, 06:46 AM
wats up c-town

lol

What up mr.turbo. When are you gonna change your name?

MrTurboCivic
01-02-2009, 10:48 AM
Tha UserCP is f*** up but i goin turbo soon

MrTurboCivic
01-02-2009, 10:53 AM
good idea brooks with c-town thread :cheers: wats goin on 2night


Tha UserCP is f*** up but i goin turbo soon

LIKEG6
01-02-2009, 12:23 PM
Dunno, I have no plans other than chillin at the house

LIKEG6
01-02-2009, 05:25 PM
Anyone comin out tonight even though it's wet?

-S Double C-
01-02-2009, 05:54 PM
There's a halo3 rocket tournament so ill be playing it till about sunup.

MrTurboCivic
01-02-2009, 06:05 PM
so where is tha halo3 tournament at :goodjob: text me



There's a halo3 rocket tournament so ill be playing it till about sunup.

LIKEG6
01-02-2009, 06:48 PM
I'll probably be out somewhere around 9

LIKEG6
01-02-2009, 06:50 PM
reps to everyone on page 3

-S Double C-
01-02-2009, 07:43 PM
so where is tha halo3 tournament at :goodjob: text me

im playing at my apt on my 63"..lol

h22ek
01-02-2009, 10:43 PM
what does Ahghg mean Eli?

-jonathan

It's what Arnold Schwarzenegger says when he gets angry lol.

GetFRESH!
01-03-2009, 01:47 PM
Somebody wanna wash & wax my car for me?





I'll give you a free one of these:
http://www.freedigitalphotos.net/image/s_handshake3.jpg



And some of this:
http://web.mit.edu/ryangray/Public/Gnus/thumbs_up.jpg



:yes:I'm lazy

WANTED
01-03-2009, 04:19 PM
Sup' all. I'm about to move to the Columbus area at the end of the month.

99jdmLs
01-03-2009, 04:37 PM
Somebody wanna wash & wax my car for me?





I'll give you a free one of these:
http://www.freedigitalphotos.net/image/s_handshake3.jpg



And some of this:
http://web.mit.edu/ryangray/Public/Gnus/thumbs_up.jpg



:yes:I'm lazy

lol at the laziness! :goodjob:

LIKEG6
01-03-2009, 10:02 PM
What's up WANTED?

What do ya drive and what bring ya to Columbus?

WANTED
01-04-2009, 10:57 AM
I drive an 03 Evo and an 08 ZX6R. I also drive an 05 Legacy GT, but it won't be down until later. The Army brings me, although I'll be in Columbus at the end of the month. I need to finish putting my car back together and to tune it.

-S Double C-
01-04-2009, 12:38 PM
^^^sweet evos are the shit! What are your mods?

LIKEG6
01-04-2009, 06:55 PM
Sounds cool man.

WANTED
01-05-2009, 02:30 AM
^^^sweet evos are the shit! What are your mods?

The question really should be what haven't I done to it yet:lmfao:. I have a pretty extensive laundry list of work done.

LIKEG6
01-05-2009, 10:04 AM
I just posted up the next Columbus meet in the event/shows section. We need a big turnout.

ash7
01-05-2009, 10:38 AM
if you want a big turnout, dont hold them at night... stick to the original format of the one in November. :goodjob:

regardless, I'll do my best to be out there.
-jonathan

h22ek
01-05-2009, 05:04 PM
i'll try to show.

hey jon , you know anything about balancer shafts ? :)

LIKEG6
01-05-2009, 06:17 PM
Well next month we can start having them on Sunday's at Cooper Creek

Everyone down for that?

ash7
01-05-2009, 06:28 PM
i'll try to show.

hey jon , you know anything about balancer shafts ? :)

hmm, i know what you're talking about, they're run by a small belt and keep the engine from vibrating a lot at idle, and i know that they're not necessary according to some H series gurus. As far as ever tinkered with one - that's a negative bro, sorry. Although Jimmy does, and he just moved in one apartment down. I'll ask him.

-jonathan

-S Double C-
01-05-2009, 09:29 PM
The question really should be what haven't I done to it yet:lmfao:. I have a pretty extensive laundry list of work done.

Cool, well there's some nice toys running around you can play with. When you get here we can get up sometime. I

-S Double C-
01-05-2009, 09:30 PM
i'll try to show.

hey jon , you know anything about balancer shafts ? :)

i took mine off my h2b swap. I seen a few dyno graphs of gains of almost 10whp

h22ek
01-05-2009, 09:36 PM
yeah, well i havent confirmed it yet, i was running my car the other day through 3rd pretty hard. and everything felt strong. but after wards i noticed the car felt a little more rough, especially at idle. but if anything the car feels faster lol. so im assuming i popped the balancer belt or something. but until i take of the timing cover i wont know for sure but thats my guess.

h22ek
01-07-2009, 07:06 AM
this thread looks lonely lol.

LIKEG6
01-07-2009, 09:10 AM
yea where did all the columbus people go lol

ash7
01-07-2009, 09:14 AM
yeah, well i havent confirmed it yet, i was running my car the other day through 3rd pretty hard. and everything felt strong. but after wards i noticed the car felt a little more rough, especially at idle. but if anything the car feels faster lol. so im assuming i popped the balancer belt or something. but until i take of the timing cover i wont know for sure but thats my guess.

if you broke the balance shaft belt it probably would have been caught up in your timing belt and your engine would have had an epic failure?

hmm, i doubt it broke man.
-jonathan

h22ek
01-07-2009, 02:04 PM
well I have a vibration like the shafts aren't working and I'm sure by car is a bit faster, car runs great, just vibrating more

h22ek
01-07-2009, 02:06 PM
But if that belt messed up then my tensioner would be at fault, right?

ash7
01-07-2009, 03:54 PM
shoot man, just look on HT...

http://honda-tech.com/search.php?do=process

i did a quick search for "balance shaft" and got 133 pages of results; first one being "20$ balance shaft removal"

-jonathan

h22ek
01-07-2009, 04:59 PM
yeah i know, i just dont have the time to do timing belt shit during the week.

WANTED
01-07-2009, 09:15 PM
if you broke the balance shaft belt it probably would have been caught up in your timing belt and your engine would have had an epic failure?

hmm, i doubt it broke man.
-jonathan

Actually, you can break the belt and not necessarily jump timing. The only time you would is if the belt get's caught up in the timing belt and causes it to jump. about 90% of the time (or more), that will happen. Sometimes, the belt gets pushed off to the side or simply shreds enough teeth that it falls out of phase. Even in those scenarios though, not addressing the issue is playing with fire as the remains could eventually cause you to jump timing and destroy your engine.

h22ek
01-07-2009, 10:33 PM
Actually, you can break the belt and not necessarily jump timing. The only time you would is if the belt get's caught up in the timing belt and causes it to jump. about 90% of the time (or more), that will happen. Sometimes, the belt gets pushed off to the side or simply shreds enough teeth that it falls out of phase. Even in those scenarios though, not addressing the issue is playing with fire as the remains could eventually cause you to jump timing and destroy your engine.

yeah trust me i know, but until this weekend i am just going to have to drive it and hope it doesnt fail lol, but im positive it does seem faster, i punched it in 2nd gear and about broke my neck lol. but i may do what ive been wanting to do for a while and buy a new motor from hmotors or tiger, and swap it out, and build up the one im using now for h22a turbo (cough) lol

ash7
01-09-2009, 01:25 AM
Actually, you can break the belt and not necessarily jump timing. The only time you would is if the belt get's caught up in the timing belt and causes it to jump. about 90% of the time (or more), that will happen. .

So, pretty much you're agreeing with me?

The belt on his engine was replaced by the previous owner, so it can't be more than a year old. Unless Eli has driven more than 60k miles, I bet it is still intact and operational. :goodjob:

A 10whp gain (NA) wouldn't be very noticeable on the move Eli, perhaps you're just pushing your car more than usual and turning up the sensitivity on your butt dyno. :) swing it by my house Saturday. And we'll take a look at it if you like.

-jonathan

h22ek
01-09-2009, 07:35 AM
So, pretty much you're agreeing with me?

The belt on his engine was replaced by the previous owner, so it can't be more than a year old. Unless Eli has driven more than 60k miles, I bet it is still intact and operational. :goodjob:

A 10whp gain (NA) wouldn't be very noticeable on the move Eli, perhaps you're just pushing your car more than usual and turning up the sensitivity on your butt dyno. :) swing it by my house Saturday. And we'll take a look at it if you like.

-jonathan

haha ok.

h22ek
01-09-2009, 07:36 AM
my main concern is my auto tensioner, I hope its not failing on me.

ash7
01-09-2009, 08:49 AM
if your auto tensioner is "failing" i doubt you would know it until it's too late...

If you cant find time to inspect it to make sure, then don't have an anxiety attack over it man, just drive your car until you have time to take a look. :goodjob:

-jonathan

LIKEG6
01-09-2009, 12:01 PM
if your auto tensioner is "failing" i doubt you would know it until it's too late...

If you cant find time to inspect it to make sure, then don't have an anxiety attack over it man, just drive your car until you have time to take a look. :goodjob:

-jonathan

yup just don't beat on it continually

GetFRESH!
01-10-2009, 08:50 AM
yup just don't beat on it continually


that's what she said.














:lmfao:haha.

LIKEG6
01-10-2009, 08:59 AM
that's what she said.














:lmfao:haha.

lol you stoopid

WANTED
01-11-2009, 03:28 PM
So, pretty much you're agreeing with me?


Jonathan
Not entirely, no. We do agree on what usually happens with a a broken balance belt. But, at least from what we have both typed on the issue, we are not in full agreement that his balance belt isn't broken, damaged, or suffered premature failure.

You'll have to forgive me as I am an outsider looking in, but how sure are you that the previous owner did replace both belts?

BTW, we have the same name.:cheers:

WANTED
01-11-2009, 04:06 PM
that's what she said.














:lmfao:haha.

Nice:D

LIKEG6
01-11-2009, 11:28 PM
How was everyone's weekend?

ash7
01-12-2009, 05:01 PM
BTW, we have the same name.:cheers:

good news indeed :cheers:

have you decided where you're going to be moving into around here yet? Or will you be staying on post?

the previous owner of Eli's car is a good friend of mine. :) we replaced the belts together in the garage.
-jonathan

h22ek
01-13-2009, 03:56 PM
Im off work thurs and friday to move into my new house :) pointless post but im excited lol, and im still getting paid :)

-S Double C-
01-13-2009, 09:59 PM
lol sweet glad to see you found a job and getting somewhere. I know how that crap feels to not have a job or anything for a long period of time. Im glad im off monday and getting paid lol special thanks to the BROS!

WANTED
01-14-2009, 08:01 AM
good news indeed :cheers:

have you decided where you're going to be moving into around here yet? Or will you be staying on post?

the previous owner of Eli's car is a good friend of mine. :) we replaced the belts together in the garage.
-jonathan

I'll be living off post, in Alabama. Got set up with a house already. Right now, I'm busy as hell trying to get my car pieced back together. My issues right now is piddley shit here and there.
I'm at this point HOPING to be able to get the car on the dyno prior to my departure. However, I might not and have to do it in Atlanta. Does anyone by chance know a shop there with a load bearing awd dyno? Also, are there any Autronics tuners in the area who could provide me with support if I need some?

-S Double C-
01-14-2009, 10:22 AM
go to topspeed in atlanta theyve tuned a few 700+ and 800+awhp evo's also have a 1000+awhp gsx

WANTED
01-15-2009, 07:36 AM
go to topspeed in atlanta theyve tuned a few 700+ and 800+awhp evo's also have a 1000+awhp gsx

Just looked at their site, and they're using a Dynojet, which is an Inertia Dyno. Not really interested in that type of dyno. Would prefer either a Dynodynamics or Mustang if there's one around.

LIKEG6
01-15-2009, 11:50 AM
Batlground and Balanced are 2 others

-S Double C-
01-15-2009, 06:34 PM
wouldnt let batlground tune a go kart :ninja:

WANTED
01-16-2009, 07:56 AM
No shop I go to will be tuning my car. I just want to rent dyno time. I do my own tuning. I'm just particular about the type of dyno as I want to do "steady state tuning"

LIKEG6
01-16-2009, 12:31 PM
you could probably try to google an inertia dyno in GA

There is a Mustang shop right next to Mainstream that might have a dyno

MrTurboCivic
01-16-2009, 06:21 PM
anyone have b-series mounts find me some and let me know thankz

WANTED
01-16-2009, 06:52 PM
you could probably try to google an inertia dyno in GA

There is a Mustang shop right next to Mainstream that might have a dyno

I found a shop called Orton Performance that has a Mustang awd Dyno. I think they might be the winner.

-S Double C-
01-16-2009, 07:51 PM
No shop I go to will be tuning my car. I just want to rent dyno time. I do my own tuning. I'm just particular about the type of dyno as I want to do "steady state tuning"

Cool, what EMS are you tuning with?

WANTED
01-17-2009, 02:52 AM
Autronic

SoLJames95
01-17-2009, 07:20 PM
you could probably try to google an inertia dyno in GA

There is a Mustang shop right next to Mainstream that might have a dyno

NO they moved and Mainstream will let you dyno/tune ur car Pretty sure. You would have to talk to Charles, and it might a little more then a regular tune. I know hes done it before.;)

-S Double C-
01-18-2009, 12:37 PM
Mainstream doesnt have a awd dyno

ash7
01-18-2009, 02:38 PM
NO they moved and Mainstream will let you dyno/tune ur car Pretty sure. You would have to talk to Charles, and it might a little more then a regular tune. I know hes done it before.;)

shoot me your number again James, i lost it. Actually scratch that, I'll get it from Ben.

-jonathan

SoLJames95
01-18-2009, 04:02 PM
Mainstream doesnt have a awd dyno
No unfornately Batl ground does:2up:, but mainstream usually uses someone else for awd dynos.

GetFRESH!
01-18-2009, 04:43 PM
http://img.photobucket.com/albums/v626/one_truth/dinotuned.jpg
i can haz?

LIKEG6
01-18-2009, 05:39 PM
shoot me your number again James, i lost it. Actually scratch that, I'll get it from Ben.

-jonathan

actually scratch since you just messaged me lol

I don't have it either

h23bb2
01-18-2009, 09:38 PM
why the hell isn't there one in Columbus????

WANTED
01-18-2009, 09:51 PM
http://img.photobucket.com/albums/v626/one_truth/dinotuned.jpg
i can haz?

Absolutely.:D

-S Double C-
01-19-2009, 12:50 AM
No unfornately Batl ground does:2up:, but mainstream usually uses someone else for awd dynos.

he done said he's not going to batlground its the wrong dyno :goodjob:

SoLJames95
01-19-2009, 09:45 AM
he done said he's not going to batlground its the wrong dyno :goodjob:
Theres actually 3 if i remebered shops in the northern part of the ga. lethal injection another one. i cant think. damn it. oh well it will come to me.

LIKEG6
01-19-2009, 10:13 AM
why the hell isn't there one in Columbus????

Columbus doesn't really have a big need for one. There was on called Penny Pusher's off of Veterans next to Groome and Harley Davidson but it closed down.

It's kinda like all the shops that have opened here other than PTAP have closed down just about. My goal is to open a import performance shop but the market here isn't right for it.

ash7
01-19-2009, 01:23 PM
specialty shops like an import car shop require a HUGE market since they"re targeting such a small share. The main reason the PTAP hasn't closed down is because they're still selling a lot of parts online now.

Columbus car folks (as a whole) are too concerned with teh body kitz and dem pimp'n rimz to care about engine performance. Eventually that will change, but not for a long time.

-jonathan

-S Double C-
01-19-2009, 02:52 PM
LOL at "dem pimp'n rimz "

LIKEG6
01-19-2009, 03:32 PM
specialty shops like an import car shop require a HUGE market since they"re targeting such a small share. The main reason the PTAP hasn't closed down is because they're still selling a lot of parts online now.

Columbus car folks (as a whole) are too concerned with teh body kitz and dem pimp'n rimz to care about engine performance. Eventually that will change, but not for a long time.

-jonathan

x2 and it sucks because any good performance shops will just die out here

Hopefully when I open I can have enough business from the peeps I know around here to stay open

ash7
01-19-2009, 03:40 PM
Hopefully when I open I can have enough business from the peeps I know around here to stay open

In a perfect world that would be awesome... however, friends come to expect hook ups - which doesn't help a business keep its doors open. I've experienced this firsthand working on airplanes; a quick "favor" turns into an afternoons worth of work which i would normally be paid for if it was just another customer.

-jonathan

LIKEG6
01-19-2009, 04:26 PM
In a perfect world that would be awesome... however, friends come to expect hook ups - which doesn't help a business keep its doors open. I've experienced this firsthand working on airplanes; a quick "favor" turns into an afternoons worth of work which i would normally be paid for if it was just another customer.

-jonathan

I totally agree with that too. I'm going to be lookin in a industrial park soon for a space to put a lift in and have somewhere for the "crew" to work on our stuff. It's hard to work on my cars in an apartment building.

ash7
01-19-2009, 04:47 PM
I totally agree with that too. I'm going to be lookin in a industrial park soon for a space to put a lift in and have somewhere for the "crew" to work on our stuff. It's hard to work on my cars in an apartment building.

definitely agree with that one bro :goodjob:

garages ftw
-jonathan

LIKEG6
01-19-2009, 07:00 PM
lol yupp

at least you have somewhat of a garage

I wish we had something like that where I live

h23bb2
01-20-2009, 11:21 AM
even with all the military brats with mommy and daddy's money? If a shop were to open up and could come out to britt on occasion with an unsuspecting, well built car that was extremely fast, don't you think it would grab some attention? Promote a new thought process among the "dummies" that come out now?

Buttons
01-20-2009, 11:56 AM
even with all the military brats with mommy and daddy's money? If a shop were to open up and could come out to britt on occasion with an unsuspecting, well built car that was extremely fast, don't you think it would grab some attention? Promote a new thought process among the "dummies" that come out now?

you are at columbus state this semester, right?

-S Double C-
01-20-2009, 07:45 PM
even with all the military brats with mommy and daddy's money? If a shop were to open up and could come out to britt on occasion with an unsuspecting, well built car that was extremely fast, don't you think it would grab some attention? Promote a new thought process among the "dummies" that come out now?

Most well built and extremely fast cars arent built by shops. Maybe stuff like the sleeves and valvetrains are done by shops unless you have acess to the needs which is usually highly unlikely. I dont have respect for a shop built car...unless its by the owner of the shop. Any one can drop off a car and pay money to have something built. But the problem with that is then 9 outta 10 they run around hollaring they built it.

LIKEG6
01-21-2009, 07:08 AM
Yea If I had a shop I would have a "shop" car which would be a tax write off but I would have to have it done in that year.

Most of the people that come to Britt care nothing about "fast". They care more for the looks and under glow lol. The "fast" cars are usually at Amercian Buffalo but it's too cold right now for people to do anything.

ash7
01-21-2009, 09:40 AM
So i left my car parked outside last night, like an idiot.

Frost on the car FTMFL - i was irritated this morning.
-jonathan

99jdmLs
01-21-2009, 10:47 AM
So i left my car parked outside last night, like an idiot.

Frost on the car FTMFL - i was irritated this morning.
-jonathan
Yes, at least uhave a garage to keep it in. Lol. My door wuz froze shut this AM. I hate the cold

ash7
01-21-2009, 12:44 PM
Yes, at least uhave a garage to keep it in. Lol. My door wuz froze shut this AM. I hate the cold

i don't mind the cold, i just don't like how when the car "melts" when I'm driving with the frost melting, the car gets wet, which means it gets dirty... which means i have to wash it... and then wind up with a nice case of frozen hands.

stupid frost...
-jonathan

-S Double C-
01-21-2009, 02:56 PM
Yea If I had a shop I would have a "shop" car which would be a tax write off but I would have to have it done in that year.

Most of the people that come to Britt care nothing about "fast". They care more for the looks and under glow lol. The "fast" cars are usually at Amercian Buffalo but it's too cold right now for people to do anything.

SOOO True! And even now no one goes to AB either.

-S Double C-
01-21-2009, 09:08 PM
anyone know who drives a clean ass white eg8 with bronze rota circuit 8's? It had a gwinnett tag and i believe it was a black guy driving. Seen him on veterans today.

LIKEG6
01-22-2009, 10:54 AM
never seen it I don't think

GetFRESH!
01-22-2009, 07:29 PM
Quick tech question to all yo local peeps:

Ok so I got them there Buddy Club N+ coilovers on the hatch. If you're familiar with the design (and many other similarly designed full coilover setups), the height adjustment is independent from the spring pre-load. Everyone still on the same page? Ok so... The rears adjust fine, spring stays pre-loaded to upper strut mount, full setup adjusts down into bottom piece which is bolted to lca. Fronts, well... not so fine. The damn shit won't adjust down into lower piece which goes into the front forks, so I gotta just spin the upper perches and take most of the pre-load off the spring to lower my front any. This my friends is what I call "boo boo" and I'd like to fix it. Any suggestions on how I could go about "un-freezing" the threads? I know A.T. Himself already janked up a set of omni's by trying to do what I'm needing to get done, and I don't wanna repeat that.

Any takers?

Maybe I should post this in the General Tech forum.

ash7
01-23-2009, 08:06 AM
Quick tech question to all yo local peeps:

Ok so I got them there Buddy Club N+ coilovers on the hatch. If you're familiar with the design (and many other similarly designed full coilover setups), the height adjustment is independent from the spring pre-load. Everyone still on the same page? Ok so... The rears adjust fine, spring stays pre-loaded to upper strut mount, full setup adjusts down into bottom piece which is bolted to lca. Fronts, well... not so fine. The damn shit won't adjust down into lower piece which goes into the front forks, so I gotta just spin the upper perches and take most of the pre-load off the spring to lower my front any. This my friends is what I call "boo boo" and I'd like to fix it. Any suggestions on how I could go about "un-freezing" the threads? I know A.T. Himself already janked up a set of omni's by trying to do what I'm needing to get done, and I don't wanna repeat that.

Any takers?

Maybe I should post this in the General Tech forum.

hit me up saturday man, we'll get your coilovers fixed. :goodjob:
-jonathan

LIKEG6
01-23-2009, 01:29 PM
hit me up saturday man, we'll get your coilovers fixed. :goodjob:
-jonathan

and there ya go

bigdare23
01-23-2009, 01:32 PM
Hey Brooks do you know how to solder good? If so holla at me cause I'm coming down tonight.

ash7
01-23-2009, 02:02 PM
Hey Brooks do you know how to solder good? If so holla at me cause I'm coming down tonight.

what are you wanting to solder?
-jonathan

LIKEG6
01-23-2009, 02:43 PM
I haven't ever soldered actually. Since you're gonna be in town hit me up so we can run lol

I'm sure se7en is a pro solderer :goodjob:

bigdare23
01-23-2009, 02:44 PM
I haven't ever soldered actually. Since you're gonna be in town hit me up so we can run lol

I'm sure se7en is a pro solderer :goodjob:


I would, but I just got a ticket, soooooooooooo me drives the speed limit now :lmfao:



Bring yo punk ass to the track tho!!!

LIKEG6
01-23-2009, 02:53 PM
I'll be at the track in April for sure for club wars. Probably go again before that to get a better N/A time though.

99jdmLs
01-23-2009, 04:16 PM
I haven't ever soldered actually. Since you're gonna be in town hit me up so we can run lol

I'm sure se7en is a pro solderer :goodjob:
and if he cant i can surely assist. not amazing at it but can get a job done. :goodjob:

GetFRESH!
01-23-2009, 05:20 PM
hit me up saturday man, we'll get your coilovers fixed. :goodjob:
-jonathan


and there ya go

Haha. Super se7en to the rescue! :bump:

Thanks Jon. I gotta work Saturday till 3, but I'll hit you up afterwards and we'll get something going.

MrTurboCivic
01-24-2009, 06:24 PM
tha white eg8 is my homie he stay here

MrTurboCivic
01-24-2009, 06:25 PM
want to race me 2nite brooks

ash7
01-24-2009, 06:29 PM
"Vtec on yall hater."

*sigh* my, oh my...

-Jonathan

LIKEG6
01-26-2009, 08:23 AM
maybe this weekend Cantrell since I didn't see this earlier lol

ash7
01-26-2009, 09:18 AM
this thread moves so fast that it's hard to keep up with...

oh wait - not so much.
-jonathan

LIKEG6
01-27-2009, 08:15 AM
LOL

That's because Columbus is lame

six7teen
01-28-2009, 05:49 AM
LOL

That's because Columbus is lame

:yes: :yes:

99jdmLs
01-28-2009, 06:54 AM
:yes: :yes:
Very

ash7
01-28-2009, 08:12 AM
my turn!

:yes::yes:

-jonathan

99jdmLs
01-28-2009, 08:19 AM
Dang, this is almost fun. :blah:



Anyone got some arp head bolts for an ls? 8)

ash7
01-28-2009, 08:25 AM
^ a month too late bro... *dang*

-jonathan

99jdmLs
01-28-2009, 08:31 AM
^ a month too late bro... *dang*

-jonathan
tell me bout it. *frown*. Dont need em for like a month, but im goin ahead and lookin. Lol

ash7
01-28-2009, 01:41 PM
so how about my PM box says that i have 65,535 unread messages? ...I'm not joking.

...talk about Mr. Popular...
-jonathan

LIKEG6
01-28-2009, 04:44 PM
so how about my PM box says that i have 65,535 unread messages? ...I'm not joking.

...talk about Mr. Popular...
-jonathan

LOL that's not evev possible

MichaelR
01-28-2009, 09:14 PM
Who all is going to the event at reynolds on march 14 and the importfaceoff on the 15th?

99jdmLs
01-28-2009, 10:44 PM
LOL that's not evev possible
ya, doesnt that thing max out or something/? or do u just not care what people have to say to ya. :blah: :blah: :blah:
lol

ash7
01-29-2009, 03:37 PM
LOL that's not evev possible

i guess you're right...

here's the picture:
http://i2.photobucket.com/albums/y44/hatch77/n521375645_5620988_3055.jpg

hmm
-jonathan

LIKEG6
01-30-2009, 08:44 AM
LOL

That's crazy

....stop glitchin

ash7
01-30-2009, 11:53 AM
wheels are being painted tonight if anyone would like to stop by the garage and get stoned by all the paint fumes...

-jonathan

99jdmLs
01-30-2009, 12:02 PM
wheels are being painted tonight if anyone would like to stop by the garage and get stoned by all the paint fumes...

-jonathan
hmmm, snds fun. lol and what color are you paitn em this time

LIKEG6
01-31-2009, 08:43 AM
Mine will be painted too soon lol

Not the whole thing though

99jdmLs
01-31-2009, 09:36 PM
i think ill be polishing mine....if i can get the guts to. i don't like messing with my rims. especially when i already like how they look. ..... i hate being cursed with always wanting something diff.

GetFRESH!
02-02-2009, 11:04 PM
http://www.importatlanta.com/forums/showthread.php?t=216932

:crazy:

ash7
02-03-2009, 04:05 PM
added my two cents to your thread andrew.

-jonathan

SoLJames95
02-03-2009, 10:02 PM
^^^ More like a $1.50.. I crack myself up.

99jdmLs
02-04-2009, 07:25 AM
U like ur car being slammed james, lol. If u dont, give me those omni and ill give u some stock struts with a free c-pillar! :D

ash7
02-04-2009, 09:42 AM
So how about the cute neighbor that lives above me was telling me about how she has been getting some complaints that her dog has been "killing the grass" when she takes it outside to pee... the dog is a Great Dane...

but seriously people - has anyone noticed that it is WINTER out here?! Maybe that's what's "killed the grass"? Just maybe? .....perhaps?

Christ, i hate idiots...

/rant
-jonathan

99jdmLs
02-04-2009, 06:46 PM
lol, people will be stupid.

how bout when i get up this AM to go to work, i tried opening my door to my car....it wuz frozen stuck. again i state. i hate the cold(or the ice that comes with it)

ash7
02-05-2009, 12:25 PM
lol, people will be stupid.

how bout when i get up this AM to go to work, i tried opening my door to my car....it wuz frozen stuck. again i state. i hate the cold(or the ice that comes with it)

...this has happend how many times? ...try a silicone lubricant on the door seal, a nice blast of WD40 on the hinges, and some white lithium grease on the door slider. :goodjob:

-jonathan

hondachik
02-05-2009, 12:27 PM
Holas =)

ash7
02-05-2009, 01:13 PM
...so you have 2300+ posts... and i havent' seen your car around town...? (I'm assuming it's an accord?)

-jonathan

LIKEG6
02-05-2009, 07:32 PM
Holas =)

WAZ UP!?!?

hondachik
02-05-2009, 07:43 PM
...so you have 2300+ posts... and i havent' seen your car around town...? (I'm assuming it's an accord?)

-jonathan


Yup. I've had it almost a year now. Used to have a 2000 Civic that I'm sure you've seen around. Probably won't see my Accord because its stock. I don't have those black rims on there anymore. And my post count would have been way over that but I've been MIA for a few months.



Hey Brooks. Whats up man?

ash7
02-06-2009, 09:50 AM
Yup. I've had it almost a year now. Used to have a 2000 Civic that I'm sure you've seen around. Probably won't see my Accord because its stock. I don't have those black rims on there anymore. And my post count would have been way over that but I've been MIA for a few months.

ah yes, that would explain it. Well, if you see me running around, honk or something. :goodjob:

-jonathan

WANTED
02-06-2009, 05:23 PM
Hey all. I finally made it down here. However, my car did not. A near catastrophic failure basically forced me to leave the car behind due to lack of time to work on it. I did, however bring the bike with me.

ash7
02-07-2009, 01:01 AM
*yay*

-Jonathan

LIKEG6
02-07-2009, 07:14 AM
Yup. I've had it almost a year now. Used to have a 2000 Civic that I'm sure you've seen around. Probably won't see my Accord because its stock. I don't have those black rims on there anymore. And my post count would have been way over that but I've been MIA for a few months.



Hey Brooks. Whats up man?

NM, just been workin a lot. What have you been up to?

WANTED - That sucks man

WANTED
02-08-2009, 06:30 PM
It's disappointing, but not the end of the world. My timing belt started to lose tension on the dyno. The only possible culprit was the tensioner pulley.

My build thread is here (http://www.coloradoevo.com/forums/showthread.php?t=1302).

-S Double C-
02-08-2009, 07:34 PM
^^^that sucks are you gonna be bringing it down? i was hoping to have a chance to gets some runs in with it

ash7
02-09-2009, 09:38 AM
so how about i almost crashed the plane and died this morning because of an idiot pulling out onto the runway while i was 200ft off the deck during the approach...

*sigh* what a typical monday
-jonathan

Buttons
02-09-2009, 09:51 AM
so how about i almost crashed the plane and died this morning because of an idiot pulling out onto the runway while i was 200ft off the deck during the approach...

*sigh* what a typical monday
-jonathan

sooo i think i saw you the other day around the airport.

ash7
02-09-2009, 09:52 AM
sooo i think i saw you the other day around the airport.

not surprising... i spend most of my time around here. :)

-jonathan

Buttons
02-09-2009, 09:53 AM
not surprising... i spend most of my time around here. :)

-jonathan

i know... lol just thought i would point out the fact you should look for a white honda accord...

ash7
02-09-2009, 10:22 AM
lol ah yes, good point... or you should chase me down honking next time.

-jonathan

Buttons
02-09-2009, 10:31 AM
lol ah yes, good point... or you should chase me down honking next time.

-jonathan

i usually go that way when i'm about to be late for class... so i don't see that working... lol