<<<Official Columbus, GA Discussion Thread>>>

[SoLJames95]

:cry:
I'm talkin about at the track mesiing with boost airpressure lining up at the line filling up ice box keeping nitrious hott... not easy do do it all by yourself at the track

:boohoo: just playing I just wanted to put that. I'll be in hot Texas for the next 2 1/2 years starting in March, so no weekend track for me in GA. :(

[-S Double C-]

I'm talkin about at the track mesiing with boost airpressure lining up at the line filling up ice box keeping nitrious hott... not easy do do it all by yourself at the track

I warned you...lol

[-S Double C-]

ran the orange lamborghini murcielago today on the short wheel base zx10...it was interesting!!!!

[justnprsh07]

I hope you won if not you need to sell that piece bc there not that fast

[willard]

well just putting this out I'm going to phenix city drag strip tomorrow gates open at 11am i haven't decided when I'm going yet but ill be there. So if anyone else is wanting to go send me a message or txt me. gonna get some times before the new tune.

[burnout1990]

I might go with you, just txt me about a hr before your ready to go

[willard]

I might go with you, just txt me about a hr before your ready to go

alright i will for sure

[-S Double C-]

I hope you won if not you need to sell that piece bc there not that fast

i let him jump out about 3 cars then came past him on one wheel at 110 lol

[willard]

i saw that car by chic fila yesterday i heard it then was like wtf never seen it around before that is one nice car

[98tegCHICK]

Hey y'all, anyone have any suggestions on a good place for body work and to have my cv axel (I think anyway) looked at?

[-S Double C-]

cv axle, wolf mufflers, body work fro a decent price xtreme on victory dr. (the big airplane hanger body shop) or justnprsh07 on here if he has time

[98tegCHICK]

Mkay. Thanks much :)

[willard]

Mkay. Thanks much :)

you just need a new axle or you just need someone to look and see it needs replaced?

[98tegCHICK]

I'm thinkin new axel. It's making the same sound my Eclipse did when i turn. And that was the problem back then...I think it needs to be completely re wired, too, if anyone has any suggestions on that.

[kte324]

I'm thinkin new axel. It's making the same sound my Eclipse did when i turn. And that was the problem back then...I think it needs to be completely re wired, too, if anyone has any suggestions on that.

sent you a pm.

[GetFRESH!]

Selling my SSR's. $800 cash money no tires if purchased by this thursday. Holla at a nig.

http://www.importatlanta.com/forums/showthread.php?306568-FT-FS-Custom-Kandy-Teal-SSR-Type-C-4x100-15x7-35-**MINTY**

[justnprsh07]

I'm thinkin new axel. It's making the same sound my Eclipse did when i turn. And that was the problem back then...I think it needs to be completely re wired, too, if anyone has any suggestions on that.

i can fix anything you got and i have a cv axle at the house to go with it call me 7065877278

[justnprsh07]

tomorrow night some ppl are meeting up at steak and shake on bradley park at 7:30 if anyone wants to come... they have been doing it the first tues of every month for a few moths now and there has actually been a few ppl coming every month and ill be there tom so if anyone wants to show up your more than welcome

[justnprsh07]

cv axle, wolf mufflers, body work fro a decent price xtreme on victory dr. (the big airplane hanger body shop) or justnprsh07 on here if he has time

extreme lol he said good body work not donks with 24s and some wierd ass paint jobs

[98tegCHICK]

Their milkshakes are sooo good

[kte324]

tomorrow night some ppl are meeting up at steak and shake on bradley park at 7:30 if anyone wants to come... they have been doing it the first tues of every month for a few moths now and there has actually been a few ppl coming every month and ill be there tom so if anyone wants to show up your more than welcome

I might stop by.

[justnprsh07]

come on by i know me and luke will be there and i finally bought my cage today so in about a week ill be needing some help holding bars

[kte324]

come on by i know me and luke will be there and i finally bought my cage today so in about a week ill be needing some help holding bars

I will. We are like talking in two different threads, but what cage did you get? Jimmy and I have decided to do mine one weekend in Feb, he already ordered the piping. I still haven't turned it on since Nov.

[willard]

come on by i know me and luke will be there and i finally bought my cage today so in about a week ill be needing some help holding bars

ill help ya for sure

[-S Double C-]

extreme lol he said good body work not donks with 24s and some wierd ass paint jobs

kendahls's cousins hatch turned out REALLY good i was actually impressed however im having casey grant paint my bike(s) :ninja:

[98tegCHICK]

I have boo boos I need fixed and repainted :( jus want iit to look halfway decent again, but I want someone that'll do a good job

[justnprsh07]

I have boo boos I need fixed and repainted :( jus want iit to look halfway decent again, but I want someone that'll do a good job

i guess it all comes down to how much your willing to spend as to how good of a job youll get... you can look at bruses supra that i finally painted this weekend to see just what i can do

[justnprsh07]

I will. We are like talking in two different threads, but what cage did you get? Jimmy and I have decided to do mine one weekend in Feb, he already ordered the piping. I still haven't turned it on since Nov.

i got the s&w hell for the price it comes pre bent and notched cheaper than i can even buy all the pipe and plates that i want to do for a 10 point

[kte324]

i got the s&w hell for the price it comes pre bent and notched cheaper than i can even buy all the pipe and plates that i want to do for a 10 point

I looked at those, they are nice. I was going to buy one, but this came up with Jimmy so we are going to do it.

[justnprsh07]

kendahls's cousins hatch turned out REALLY good i was actually impressed however im having casey grant paint my bike(s) :ninja:

casey is good and i like him alot but dont get in a hurry bc hes gonna take his time and hes not gonna get in a hurry but it will be done right... he had my cousins 1000 for months but he does great work and does beautiful work i just know you and your gonna get in a hurry

[justnprsh07]

I looked at those, they are nice. I was going to buy one, but this came up with Jimmy so we are going to do it.

i would to if i had someone willing to work out a deal on doing it for me but everyone wanted like 1500 plus for what i wanted so ill do it myself

[-S Double C-]

casey is good and i like him alot but dont get in a hurry bc hes gonna take his time and hes not gonna get in a hurry but it will be done right... he had my cousins 1000 for months but he does great work and does beautiful work i just know you and your gonna get in a hurry

im not in a hurry, just pulled the motor and head off my bike so i can install a thin head gasket and arp studs..plus changing the swing arm and finishing up my nitrous install

[nycclaye]

anyone going to Steak N Shake tonight?! I wanna go!!

[justnprsh07]

were going rain or shine... if its raining we will just all eat together inside

[nycclaye]

I may come down. I got off work for ONCE before 3 and i've been bored all afternoon... I have to hit TGI Fridays first bc one of my friends is a bartender there, but after, i'm game. I may leave the car parked though. it's washed, and I don't like boost + fwd + rain.. .bad combo.

[-S Double C-]

were going rain or shine... if its raining we will just all eat together inside

who alls going theres a few people in this town i dont like

[JAY5]

im going, hope you like me man! lol

[nycclaye]

meet up time?

[justnprsh07]

who alls going theres a few people in this town i dont like

i dont think anyone that you dont get along with will be there actually im pretty sure of it and i belive 7 or 730

[-S Double C-]

ill swing by gotta meet teymur anyways, and plus going bowling tonight

[justnprsh07]

alright well we will be there... anyone going to varsity thursday night or does anyone still go to that

[nycclaye]

i'm down to go to that. are ya'll there at S&S? what's up for after?

[ultm8mind]

Okay, clutch is slipping, SUCKS!!!! Time for a rebuild because a new one costs from $1700-2100. Why me!!!!!! Ughhh, oh well. In other news, I need to take my dash off on the ef hatch and change out the leaking damn heater core. More bullshit!!

Can anyone answer this, on my B16, I have a tri-y header. Well, when it breaks down to 2 tubes, there is an O2 sensor hole on one side. Will this only register those 2 cylinders? There is another bung for a 2nd on the test pipe, do I need to put both in or can I use one? I know I had asked Brooks when I thought I only had one bung, but now I have 2. Does it matter if I only put the one in the header? Lemme know peeps......

Working my ass off by the way is why I haven't been so active lately.

[kte324]

Okay, clutch is slipping, SUCKS!!!! Time for a rebuild because a new one costs from $1700-2100. Why me!!!!!! Ughhh, oh well. In other news, I need to take my dash off on the ef hatch and change out the leaking damn heater core. More bullshit!!

Can anyone answer this, on my B16, I have a tri-y header. Well, when it breaks down to 2 tubes, there is an O2 sensor hole on one side. Will this only register those 2 cylinders? There is another bung for a 2nd on the test pipe, do I need to put both in or can I use one? I know I had asked Brooks when I thought I only had one bung, but now I have 2. Does it matter if I only put the one in the header? Lemme know peeps......

Working my ass off by the way is why I haven't been so active lately.

I would put it in the test pipe, because like you said above the o2 will only register those two cylinders. Just put a plug in the bung in the header. I would rather have it reading all then just two or one, but either way it shouldn't matter. Is this obd1 or 2?

[kte324]

ill swing by gotta meet teymur anyways, and plus going bowling tonight

The rain has got me in, I will meet you tomorrow. This weather sucks.

[justnprsh07]

Okay, clutch is slipping, SUCKS!!!! Time for a rebuild because a new one costs from $1700-2100. Why me!!!!!! Ughhh, oh well. In other news, I need to take my dash off on the ef hatch and change out the leaking damn heater core. More bullshit!!

Can anyone answer this, on my B16, I have a tri-y header. Well, when it breaks down to 2 tubes, there is an O2 sensor hole on one side. Will this only register those 2 cylinders? There is another bung for a 2nd on the test pipe, do I need to put both in or can I use one? I know I had asked Brooks when I thought I only had one bung, but now I have 2. Does it matter if I only put the one in the header? Lemme know peeps......

Working my ass off by the way is why I haven't been so active lately.

if its obd1 you dont need but one, if its obd 2 you dont half to run 2 but the check engine light will stay on.. you should just put it in the second one, if it wont reach or you need to run two it will be ok to run it in the first one bc all four cylinders should simply be the same so in theory they should all read almost identical

[-S Double C-]

Okay, clutch is slipping, SUCKS!!!! Time for a rebuild because a new one costs from $1700-2100. Why me!!!!!! Ughhh, oh well. In other news, I need to take my dash off on the ef hatch and change out the leaking damn heater core. More bullshit!!

Can anyone answer this, on my B16, I have a tri-y header. Well, when it breaks down to 2 tubes, there is an O2 sensor hole on one side. Will this only register those 2 cylinders? There is another bung for a 2nd on the test pipe, do I need to put both in or can I use one? I know I had asked Brooks when I thought I only had one bung, but now I have 2. Does it matter if I only put the one in the header? Lemme know peeps......

Working my ass off by the way is why I haven't been so active lately.

i wish my muti lock up clutch i just bought for the bike was only 2k lol and put it in the first hole, thats how mine has been for months on my tri y header and im getting 36mpg

[ultm8mind]

Ok, thanks guys. I know in theory they should all be the same, lol, but you know how that goes. I was thinking of just splicing it also and "t'ing" it off to to the two plugs but putting it in the test pipe. But I see Sean isn't really having issues, so I might even just try to run one. I'm thinking it's obd0, but not sure. I gotta do an obd1 or 2 conversion relatively soon, but for now I just wanted to get it on the road because the evo is down, lol.

How long should it take to pull this dash down to get to the heater core? Brooks, how many times you took your dash down? Lemme know.

[justnprsh07]

its hot bad it will take longer to swap out the core than it will to take the dash out

[ultm8mind]

its hot bad it will take longer to swap out the core than it will to take the dash out

Oh ok.

[willard]

Some mother fucker hit my car today WTF im fucking pissed dented my fender in

[-S Double C-]

lol damn that sucks!

[justnprsh07]

Some mother fucker hit my car today WTF im fucking pissed dented my fender in

did they run... if not insurance check cha ching

[LIKEG6]

I took out my first ef's dash and it was easy but the heater core was somewhat of a pain. That was before I really knew what I was doing though.

Btw the teg is up for sale cause I'm buying a spaceship.

[justnprsh07]

spaceship.. why you want a ep3

[LIKEG6]

Lol I would like one but I'm not getting one this time.

[kte324]

Lol I would like one but I'm not getting one this time.

minivan?

[LIKEG6]

Once the teg sells you shall see my friend

[ash7]

Once the teg sells you shall see my friend

whenever anyone says the word "spaceship" in relation to cars... i always think: "new civic that looks like a miniaturized 1st gen dodge stratus."

Getting one of those? :)
-jonathan

[kte324]

whenever anyone says the word "spaceship" in relation to cars... i always think: "new civic that looks like a miniaturized 1st gen dodge stratus."

Getting one of those? :)
-jonathan

I was thinking, this right here.

http://static.cargurus.com/images/site/2009/02/26/11/45/1991_pontiac_trans_sport_3_dr_se_passenger_van-pic-61299.jpeg

[ultm8mind]

Odyssey, player

[LIKEG6]

Lol. I would rock a newer odyssey as long as it was on air. I do want a new si sedan but that will be in a year or 2. The nissan cube is looking pretty cool too though.

[98tegCHICK]

minivan?

Lol Brooks in a minivan...that's a funny mental image ;) the Si I can see tho. How's the new youngin, anyway?

[ultm8mind]

Bagged Previa, oh yeah.....

[ultm8mind]

Buy my Evo, whenever the clutch is replaced I'll be selling it.

[-S Double C-]

damn the cars a 4 door truck fully loaded is calling my name here real soon, had medical bill get on my credit from when i was 18 that costed me out the ass but payed it this morning so im golden!

[98tegCHICK]

Grrrr job at advance auto fell thru..somethin on my mvr...I call BS, but whatever. SO, I need more houses to clean til I find somethin else. If y'all know anyone that wants it done, lemme know. That is all.

[LIKEG6]

Kylie is doing good I'll post a pic from a few weeks ago.
http://i1102.photobucket.com/albums/g450/T2KU/2011-01-20_21-54-03_404.jpg
http://i1102.photobucket.com/albums/g450/T2KU/2011-01-24_20-35-42_946.jpg

Not gonna have enough to buy the evo brucie unless you take payments lol.

[nycclaye]

Grrrr job at advance auto fell thru..somethin on my mvr...I call BS, but whatever. SO, I need more houses to clean til I find somethin else. If y'all know anyone that wants it done, lemme know. That is all.

not sure if you were kidding or not, but if you need a house to clean, I do have one for you. A friend of mine from work has been struggling to balance her job, kids, and their activities and we were just talking about her hiring someone to come out and clean. if you're serious, pm me.

[kr3w108]

minivan?

... I drive a minivan. Oddessy coupe FTW!

[nycclaye]

lol.... tru!

anyone going out tonight?

[justnprsh07]

tires will be here tues and cage is "suppose" to be here fri so ill just be waiting on warmer weather... to cold for me tonight

[nycclaye]

Do u know of anyone who can install fogs/HID kits?

[justnprsh07]

i can do it the right way

[justnprsh07]

i even have some hid kits

[nycclaye]

well when i get mine in, i'll let cha know. i have fogs in already, but they busted, so I just need a swap of the lights (no re-wiring needed) and to add in the HID's.

[-S Double C-]

HID'S are HELL to put in on a civic si like yours^^^

[-S Double C-]

Got me a new truck today now time to get me some satin black 24's

[nycclaye]

HID'S are HELL to put in on a civic si like yours^^^

and for this reason my friend, is why i will gladly pay someone lol. i already have some in the headlights, but i want my fogs to match em and seeing as how i have a FMIC, i'm sure there's not much room for the ballasts and such.


Got me a new truck today now time to get me some satin black 24's

pix?!?!

[justnprsh07]

HID'S are HELL to put in on a civic si like yours^^^

Nothin to it if you take headlights out

[LIKEG6]

They aren't hard just pull the battery

[-S Double C-]

im not getting dirty and taking headlights out and droping a bumper to install some damn bulbs fuuuuuck that!

[-S Double C-]

Nothin to it if you take headlights out

why was your bmw at the end of walmart parking lot, friday night late? i tryed to call you

[justnprsh07]

phone is lost... ill have a new one tues and we left it there bc we met there then went to town. what happened to brandons car... why did it burn

[kte324]

phone is lost... ill have a new one tues and we left it there bc we met there then went to town. what happened to brandons car... why did it burn

Someone sent me a picture of his car, it's done. What happened?

[-S Double C-]

we dont know started smoking from under the hood then 10 mins later the valve cover was melting, glass melting, tag melted and etc....lol

[-S Double C-]

http://i339.photobucket.com/albums/n466/SEANCC_album/DSCN0231.jpg
http://i339.photobucket.com/albums/n466/SEANCC_album/DSCN0229.jpg
http://i339.photobucket.com/albums/n466/SEANCC_album/DSCN0227.jpg
http://i339.photobucket.com/albums/n466/SEANCC_album/DSCN0225.jpg
http://i339.photobucket.com/albums/n466/SEANCC_album/DSCN0230.jpg

[kte324]

wow...toast.

[-S Double C-]

yepp plans are full rebuild cage and etcccc..

[justnprsh07]

yea right i would love to see that one.... im calling impossible on that one considering metal is warped and stretched so thats not gonna happen even if he tube chassis the whole car

[LIKEG6]

God damn!!! I just saw him at the bank the other day!!

[SoLJames95]

So I'm guessing not full covered insurance? If so tiss tiss.

[ash7]

i've got to give this dude Branden props for taking the "junkyard rust" look
to a whole different level.

Nice work bro! :goodjob:

-jonathan

[SoLJames95]

So I made 417/305 at 13 psi. Original tune it had only made 365 previous owner said 400+.:rolleyes: Lol we know how that goes. Anyways; then Scotty did work. Not bad for stock internals and no fuel return system. but with 1000cc and return system and a 6262, I'll will be in the 500+ easily. And that's on stock internals(easily possible and safe).:crazy: I gotta say I like the k series game. The dyno is under Mainstreams tuned cars(ep3 60-1) and I'll post the link of the dyno run when I get link. I already need new tires. Lol

I haven't even drove it yet. James is having all the fun. :(

[LIKEG6]

Sick numbers James!!! Throw a crv bottom end in there and get you some more torque

[SoLJames95]

Nah.... It has a k20z1 in there now. No frAnkenstein here. Maybe if it pops I'll throw sleeved built end in there. Since they are decently priced. BUT ONLY IF IT BLOWS! I highly doubt it will. :)

[-S Double C-]

yea right i would love to see that one.... im calling impossible on that one considering metal is warped and stretched so thats not gonna happen even if he tube chassis the whole car

you think someone is that damn dumb?! lol He's done with that kind of stuff he's getting a truck and about to start modding his bike

[justnprsh07]

Nah.... It has a k20z1 in there now. No frAnkenstein here. Maybe if it pops I'll throw sleeved built end in there. Since they are decently priced. BUT ONLY IF IT BLOWS! I highly doubt it will. :)

you dont need a sleeved motor.... stock sleeves with good rods and pistons can hold 850plus

[justnprsh07]

you think someone is that damn dumb?! lol He's done with that kind of stuff he's getting a truck and about to start modding his bike

hhhhmmmmmmmm:ninja::ninja::ninja:

[SoLJames95]

you dont need a sleeved motor.... stock sleeves with good rods and pistons can hold 850plus

Safety precautions. Lol

[justnprsh07]

safety precautions are for slow ppl

[-S Double C-]

hhhhmmmmmmmm:ninja::ninja::ninja:

hmmmm my ass

[k u r y i s]

fire is wild!

like a good neighbor, state farm is there (with a new civic)

[ultm8mind]

Good numbers James.....

[kte324]

So I made 417/305 at 13 psi. Original tune it had only made 365 previous owner said 400+.:rolleyes: Lol we know how that goes. Anyways; then Scotty did work. Not bad for stock internals and no fuel return system. but with 1000cc and return system and a 6262, I'll will be in the 500+ easily. And that's on stock internals(easily possible and safe).:crazy: I gotta say I like the k series game. The dyno is under Mainstreams tuned cars(ep3 60-1) and I'll post the link of the dyno run when I get link. I already need new tires. Lol

I haven't even drove it yet. James is having all the fun. :(

nice.

[SoLJames95]

safety precautions are for slow ppl

??? :thinking:

[ultm8mind]

??? :thinking:

I'm with this guy^^

[justnprsh07]

I'm with this guy^^

if you want to win you got to push the limits unless you just want to drive around and pick up groceries

[-S Double C-]

^^^^haha

[kte324]

if you want to win you got to push the limits unless you just want to drive around and pick up groceries

I think it's his DD, not a race car. lol.

[nycclaye]

great numbers.... what did that civic look like before the burnt toast paint job? are any parts salvageable?

[ultm8mind]

I think it's his DD, not a race car. lol.

...and I drive around and get groceries in it, lol....

[SoLJames95]

Me too

[nycclaye]

i'm in a grocery getter :)

[nycclaye]

we should have a grocery getter meet!!

[ultm8mind]

we should have a grocery getter meet!!

whenever I get my clutch swapped out..

Anyone know a good welding/fab shop that's local? Help a brotha out!!!!

[kte324]

whenever I get my clutch swapped out..

Anyone know a good welding/fab shop that's local? Help a brotha out!!!!

Columbus Custom Exhaust, corner where south lumpkin meets victory drive. They do very good work, I guarantee. He can weld or fab up anything you want.

[-S Double C-]

great numbers.... what did that civic look like before the burnt toast paint job? are any parts salvageable?

Hot huges satin black paint job, skunk 2 suspension, kidd racing header,injen intake, skunk 2 catback, and a 100 dry shot, was a mid-low 13 sec car spinning like hell on street tires think it went a best of 14.0 NA. Had hids and stuff like that oem navigation. Nothing was salvageable except for left back rim


Columbus Custom Exhaust, corner where south lumpkin meets victory drive. They do very good work, I guarantee. He can weld or fab up anything you want.

What he said!

[k u r y i s]

Hot huges satin black paint job, skunk 2 suspension, kidd racing header,injen intake, skunk 2 catback, and a 100 dry shot, was a mid-low 13 sec car spinning like hell on street tires think it went a best of 14.0 NA. Had hids and stuff like that oem navigation. Nothing was salvageable except for left back rim



What he said!

EBAY that rim yo

[-S Double C-]

insurance is getting the whole car

[ultm8mind]

That good huh KTE/Sean? Not a shameless plug for where you work is it, lol? I guess if they can do a good tig job I'll be paying them a visit!!

[k u r y i s]

That good huh KTE/Sean? Not a shameless plug for where you work is it, lol? I guess if they can do a good tig job I'll be paying them a visit!!

http://toolmonger.com/wp-content/uploads/2006/12/post-jbweld.jpg

[-S Double C-]

if your refering to me working there? Nah they dont pay nearly enough for me to get my hands dirty

[justnprsh07]

whenever I get my clutch swapped out..

Anyone know a good welding/fab shop that's local? Help a brotha out!!!!

i know i few shops in phenix city that will do some real bad ass work theres noone better around here and its parker chassis its according what you want done as where to go... i know jimmy does good at normal metal stuff and 4x4s randy griswold does best at aluminum, cage and sheetmetal work, parker chassis is the best at all of it no matter what it is, and adam mcmanus will do it for the cheapest and fastest no matter what it is... hell he will do it while you wait most of the time

[justnprsh07]

That good huh KTE/Sean? Not a shameless plug for where you work is it, lol? I guess if they can do a good tig job I'll be paying them a visit!!

what exactly do you need done

[ultm8mind]

header cracked on weld. need it re-tigged...

[justnprsh07]

o not that hard then... if you want it done quick and cheap let me know and ill hook u up with adam

[ultm8mind]

Cheap and quick is always nice...

[S.Brewer]

sorry brandon...

[kte324]

That good huh KTE/Sean? Not a shameless plug for where you work is it, lol? I guess if they can do a good tig job I'll be paying them a visit!!

Yeah, he does good work. Tig welding a manifold wont be a problem.

[boosted347]

anyone in columbus do roll cages? Appreciate any help

[willard]

justin im sure what doesnt he do lol

[99jdmLs]

Cheap and quick is always nice...

thats what she said.....gigity

[kte324]

anyone in columbus do roll cages? Appreciate any help

Columbus Custom Exhaust. Same shop I mentioned above. They are doing my cage. They can do what ever you like, chromoly, dot, mild steel, etc. Just let me know and I will set you up.

[ash7]

sorry brandon...

woah! Forgot you had a screen name on here. :)

-jonathan

[boosted347]

Columbus Custom Exhaust. Same shop I mentioned above. They are doing my cage. They can do what ever you like, chromoly, dot, mild steel, etc. Just let me know and I will set you up.

will do i just need a price on one atm its goin in my slugstang, i would prefer chromoly but will do mild steel since its typically cheaper...only a 6 point, with low slung door bars for me :)

[ultm8mind]

thats what she said.....gigity

You're still alive?? Dropped off the grid!! Lockdown will do that to you though, so I understand. Lemme know the next time you get a kitchen pass and I'll try to do the same, lol....

[ultm8mind]

woah! Forgot you had a screen name on here. :)

-jonathan

Jon, almost didn't recognize you the other night. I was like is that him? Nah, can't be. Then I said lemme talk shit to him, lol, sure enough it was you!! Haha....

[ultm8mind]

Off to the range for zeroing and qualifying with my assigned weapon.....

[ash7]

Jon, almost didn't recognize you the other night. I was like is that him? Nah, can't be. Then I said lemme talk shit to him, lol, sure enough it was you!! Haha....

haha, same here m
an! I was like "kinda looks like bruce..." then i heard the words "obd1 conversion... b16 swap" and was like nooooo way, it can't be. But there's no mistaking that yankee accent bro - it sticks out like a sore thumb. :) good talking with ya buddy, sucks to hear about your evo.

-jonathan

[ultm8mind]

Evo is fine, just resting right now, needs a crutch, uh I mean clutch, lol.....if it's not one thing it's ten.....

[99jdmLs]

You're still alive?? Dropped off the grid!! Lockdown will do that to you though, so I understand. Lemme know the next time you get a kitchen pass and I'll try to do the same, lol....

thatd only be you sir. lol. im either working, at school, in the garage, or eating out somewhere. 8/ soooo actually, you could be right.

[ultm8mind]

thatd only be you sir. lol. im either working, at school, in the garage, or eating out somewhere. 8/ soooo actually, you could be right.

Rumor has it you're in love and are always locked down my man. It's all good if you're still in denial, lol. We've all been there. LOL.....

[justnprsh07]

anyone in columbus do roll cages? Appreciate any help

i can do it especially a 6 point... im about to be doing a 10point in my car in the next week if you want to see how that goes and adam mcmanus does wonders with mustangs and he does it all quick and cheap but good quality hell he may even already have one prebent

[justnprsh07]

can do a 8point in chrome moly for 750 plus 200 if you want it painted and mild steel for 550 plus 200 for paint and paint includes cleaning the welds up nice and painting the entire cage any color you might want unless you get custom colors

[justnprsh07]

http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash1/168785_1658523495501_1009530117_31458636_4880397_n .jpg

was kinda nervous but 26x10.50s for street tires will fit under stock fenders without scrubbing

[nycclaye]

^^^^^^^^^^ lmao!!! that's crazy!!!

speaking of the roll cage..... how long will it take and do you have some pix of some of the finished products you've done?

[justnprsh07]

ill post pics in about a week when i get done with mine

[boosted347]

can do a 8point in chrome moly for 750 plus 200 if you want it painted and mild steel for 550 plus 200 for paint and paint includes cleaning the welds up nice and painting the entire cage any color you might want unless you get custom colors

ill be in touch soon...i know your ass can fabricate some shit :) but ill prob be doing mild steel and lookin more at a 6 point really, my car is a convertible, i got enough damn blind spots as it is, dont need an 8 point blocking what i got lol but im in for pics when yours is done and nice tuck on the big ass tire man :goodjob:

[justnprsh07]

ill be in touch soon...i know your ass can fabricate some shit :) but ill prob be doing mild steel and lookin more at a 6 point really, my car is a convertible, i got enough damn blind spots as it is, dont need an 8 point blocking what i got lol but im in for pics when yours is done and nice tuck on the big ass tire man :goodjob:

the only diff in a 6 point and a 8 point is that on a 6 you have your center roll bar,two that go by the door to the floor, and two that go rom the top of the roll bar to the rear of the car and a 8 point has 2 more coming from center of the roll bar to the top of the tunnel in the center of the car

[kte324]

the only diff in a 6 point and a 8 point is that on a 6 you have your center roll bar,two that go by the door to the floor, and two that go rom the top of the roll bar to the rear of the car and a 8 point has 2 more coming from center of the roll bar to the top of the tunnel in the center of the car

are you putting an eight or ten point in your car?

[justnprsh07]

prob 12 its according if my rear suspension gets in the way might only be able to do 10

[kte324]

prob 12 its according if my rear suspension gets in the way might only be able to do 10

Man trying to have a jungle gym in there. Remember, that guy with the white crx said that suspension was simple. lol.

[-S Double C-]

i need a 12pt on my bike so it dont blow me off next pass

[k u r y i s]

i need a 12pt on my bike so it dont blow me off next pass

http://www.ohioraceguy.com/images/Simulator/Racing%20Cockpit%20003.jpg

[boosted347]

the only diff in a 6 point and a 8 point is that on a 6 you have your center roll bar,two that go by the door to the floor, and two that go rom the top of the roll bar to the rear of the car and a 8 point has 2 more coming from center of the roll bar to the top of the tunnel in the center of the car

Aight whatever ya think would be best, another thing this being my street car mainly, can you do swing out doors?

[justnprsh07]

Aight whatever ya think would be best, another thing this being my street car mainly, can you do swing out doors?

can but will be a little more.... i think there kinda pointless bc i can make the side bar comfortable to get in and out to where you want need it

[justnprsh07]

Man trying to have a jungle gym in there. Remember, that guy with the white crx said that suspension was simple. lol.

yea thats why he has suspension like that in his car... thought about adding two bars to hold car seats so i can bring the girls out with me on the weekends lol

[justnprsh07]

i need a 12pt on my bike so it dont blow me off next pass

this guy^^^^

[boosted347]

can but will be a little more.... i think there kinda pointless bc i can make the side bar comfortable to get in and out to where you want need it
Well then to hell with swing outs if you can make em comfortable...you know anyone interested in a meth injection kit?

[kte324]

Well then to hell with swing outs if you can make em comfortable...you know anyone interested in a meth injection kit?

full kit? how much and what brand?

[-S Double C-]

this guy^^^^

mine gets faster everytime out, i dont spend money for it to sit around when its up and going best bet im at a track somewhere come that weekend. Going to test it out in North Carolina soon at Rockingham grudgefest.

[justnprsh07]

full kit? how much and what brand?

yea what he said

[boosted347]

full kit? how much and what brand?

Its got pump, reservoir, nozzle, some hose, and boost switch. Its a devils own kit, and id like $200 but thats negotiable . If you shoot me a text at 706-566-7731 ill send you a picture

[justnprsh07]

well kte asked first so ill give him first chance but i want 2nd chance

[kte324]

well kte asked first so ill give him first chance but i want 2nd chance

You got it. I just found something that I want on H-T. I'll eventually get a meth kit for the gsr, as it will only be seeing pump gas.

[boosted347]

JUst shoot me a text justin I live out by you so getting it to you wouldn't be any problem

[justnprsh07]

phone is mia so pm me your number

[-S Double C-]

You got it. I just found something that I want on H-T. I'll eventually get a meth kit for the gsr, as it will only be seeing pump gas.

you got a gsr now? :thinking:

[boosted347]

dbl post :/

[boosted347]

thats it justin
http://i884.photobucket.com/albums/ac49/boostedgt/2011-02-10_105032.jpg
instructions
http://www.alcohol-injection.com/instructions/Stage%201.pdf

[justnprsh07]

ok ill get up with you tom when i get off

[boosted347]

i live in troy, al which is where i go to school but i know ill be in town on tuesday, i can leave it at the house or my parents shop til you can get around to get it...their shop is where elite used to be...or i can drive into town on sunday if that would work better for you, just lmk

[kte324]

you got a gsr now? :thinking:

Yeah, it's going in the DD. Eagle rods, SRP 10.5:1, Crower Springs & Retainers, Skunk2 Tuner1 Cams, Skunk2 Intake, Spooling Performance Log Manifold, 38mm Tial, either my s362 or something like a 30R, Comp Stage 5 (your old one), Ls Trans.

[-S Double C-]

oh ok gotcha...

[boosted347]

Yeah, it's going in the DD. Eagle rods, SRP 10.5:1, Crower Springs & Retainers, Skunk2 Tuner1 Cams, Skunk2 Intake, Spooling Performance Log Manifold, 38mm Tial, either my s362 or something like a 30R, Comp Stage 5 (your old one), Ls Trans.

sounds like a nice dd lol

[kte324]

sounds like a nice dd lol

I don't want anything crazy, just like 300-350whp.

[ultm8mind]

I want 160whp yo!!!

[-S Double C-]

i need to take pics of my car so i can get rid of it tired of looking at it just sitting in the driveway

[LIKEG6]

Teg got bought today so spaceship here i come

[willard]

i need to take pics of my car so i can get rid of it tired of looking at it just sitting in the driveway

what ya selling and how much?

[-S Double C-]

3500 my gsr ek coupe, clean inside and out 0 dents fresh paint, fresh wheels with new tires new exhaust, full tune up recently (plugs,wires,oil pan gasket,rotor button, distributor cap,vavle cover gasket,cam seals, spark plug tube seals, and adjusted the valves,new cd player etc....spent about 2k getting it ready to sell honestly car could easily fetch a shit ton more but i just want it gone ive been through to much with it.

[-S Double C-]

btw anyone know of anywhere hiring? that pays decent full time?

[willard]

well once we get this teg done i got it sold for 3 k and ill prob bring the lil bro by to see it

[-S Double C-]

thats whats up

[nycclaye]

3500 my gsr ek coupe, clean inside and out 0 dents fresh paint, fresh wheels with new tires new exhaust, full tune up recently (plugs,wires,oil pan gasket,rotor button, distributor cap,vavle cover gasket,cam seals, spark plug tube seals, and adjusted the valves,new cd player etc....spent about 2k getting it ready to sell honestly car could easily fetch a shit ton more but i just want it gone ive been through to much with it.

i can take pix.. and i may take the car! lol

[kte324]

well once we get this teg done i got it sold for 3 k and ill prob bring the lil bro by to see it

We will have that thing ready to sell today.

[-S Double C-]

Think its about time for some american muscle! Charger? Mustang? or something RWD

[Fox351]

btw anyone know of anywhere hiring? that pays decent full time?

I heard Nissan is looking for a Technician. With all your experience with engine swaps and everything. I thought maybe you would jump all over that.

[LIKEG6]

Anyone gonna be out tonight?

I'm goin to get my new car here as soon as I pick up some rimseses

[ultm8mind]

you gonna be rollin in it tonight Brooks?

I might be out in mama's truck, lol. Got the Evo Clutch in today, thought it was going to be bigger, kinda crazy.....

So, going to fix the little things and get that bitch ready to sell!!!

[nycclaye]

Anyone gonna be out tonight?

I'm goin to get my new car here as soon as I pick up some rimseses

i probably will be...

[boosted347]

Think its about time for some american muscle! Charger? Mustang? or something RWD

The new 5.0 is the sickest of the 3 new ones or if you wanna be baller get the zl1 camaro in 2012 factory supercharged 6.2l, its the new z28 just renamed

[nycclaye]

The new 5.0 is the sickest of the 3 new ones or if you wanna be baller get the zl1 camaro in 2012 factory supercharged 6.2l, its the new z28 just renamed

its ok... nothing special lol lol lol


http://www.youtube.com/watch?v=zZDuAfXJGQE&feature=feedu

[justnprsh07]

btw anyone know of anywhere hiring? that pays decent full time?

i ate waffle house this morning and they had a hiring now sign and direct tv is hiring

[justnprsh07]

Anyone gonna be out tonight?

I'm goin to get my new car here as soon as I pick up some rimseses

i may tonight if its warmish

[LIKEG6]

I'm on the way to pick my car up now so I'll be out when I get back

[kte324]

i ate waffle house this morning and they had a hiring now sign and direct tv is hiring

nice.

[-S Double C-]

lol im not leaving my job unless its for another paying 50 plus with benifits. My poor bike is in pieces :ninja:

http://i339.photobucket.com/albums/n466/SEANCC_album/DSCN0260.jpg

BTW Brooks officially owns the baddest eg in town :ninja:

[-S Double C-]

looking for a complete h22 swap if anyone knows of one

[justnprsh07]

lol im not leaving my job unless its for another paying 50 plus with benifits.

well yo better not leave your job then bc your not gonna get that unless you have went to school for something or have a skill... you got it pretty good where you at so you better stay as long as your can

BTW Brooks officially owns the baddest eg in town :ninja:

post pics nnnoooooowwww

[LIKEG6]

it will be debuted this weekend

[justnprsh07]

this weekend???

[-S Double C-]

Brooks hows it feel to not be able to go through a drive thru LMAO well you could if you lean over through the other window

[willard]

Brooks hows it feel to not be able to go through a drive thru LMAO well you could if you lean over through the other window

or go to checkers lol

[LIKEG6]

Yea justin this coming up weekend.

Sean I might hurt my back lol

Willard this is true. I'm gonna start hanging out there. Nice to see ya today btw and like I said car is looking damn clean.

[justnprsh07]

Yea justin this coming up weekend.

Sean I might hurt my back lol

Willard this is true. I'm gonna start hanging out there. Nice to see ya today btw and like I said car is looking damn clean.

whats this coming up weekend

[LIKEG6]

Nothing special just the weekend

[-S Double C-]

Nothing special just the weekend

its going down that whats up i got the shit scared out of me today making my first pass on a 300hp NA bike... rode a wheelie from the 330ft through the 1/8th feathering the gas and trying not to fuck up the pass! This is gonna be a good season between running my bike and my buddy rodney's

[LIKEG6]

its going down that whats up i got the shit scared out of me today making my first pass on a 300hp NA bike... rode a wheelie from the 330ft through the 1/8th feathering the gas and trying not to fuck up the pass! This is gonna be a good season between running my bike and my buddy rodney's

Fuck that shit

[ultm8mind]

Well everyone, Happy Valentines Day!! Hopefully you all got someone to share it with and enjoy it. This is going to be a fast week. 4 days, yippee!!! Hope it goes well and no more drama, we'll see.

[JAY5]

Fuck that shit

I double this!

[Fox351]

Happy VD....oh wait I mean Valentine's Day.

[justnprsh07]

well whats everyone doing this coming up weekend then... my car is driveable just waiting on a cage

[-S Double C-]

im moving back to columbus this weekend fuck ALABAMA prick ass state trooper gave kendahl a ticket for her hids and ga driver license

[justnprsh07]

where you movin to now

[-S Double C-]

not sure were looking at 4 different houses, got till friday to decide the ole lady wants a historic house on broadway but i hate that area

[justnprsh07]

does anyone know of anyone in town that has or can deal with 4" exhaust as far as bending it or having mandrel bends

[ultm8mind]

4 in exhaust, what you running a Kenworth Semi? hahaha. Just kidding I know, mine is 3 1/2 didn't see a need to go 4, although I have a 4in. intake, hmmm. Lemme know how it works out for you. Gracias.

[LIKEG6]

I'll be out either friday or saturday night. Which night is everyone gonna be out?

[ash7]

I'll be out either friday or saturday night. Which night is everyone gonna be out?

probably friday evening for me :goodjob:

-jonathan

[justnprsh07]

4 in exhaust, what you running a Kenworth Semi? hahaha. Just kidding I know, mine is 3 1/2 didn't see a need to go 4, although I have a 4in. intake, hmmm. Lemme know how it works out for you. Gracias.

dan parker at parker chassis want to do 4 off the turbo then go to 5 at the fire wall and out the back but i cant afford parker... i want to go out the back this time so i can run sfwd but if all else fails ill take it back out the side

[justnprsh07]

alright guys im gonna be needing a helping hand this weekend... dont really need to do anything just hold some pipe in place

[LIKEG6]

I might be able to help. Saturday?

[justnprsh07]

yep sat around lunch time

[kte324]

4 in exhaust, what you running a Kenworth Semi? hahaha. Just kidding I know, mine is 3 1/2 didn't see a need to go 4, although I have a 4in. intake, hmmm. Lemme know how it works out for you. Gracias.

A lot of people run 4" exhaust.

[justnprsh07]

hes use to that evo stuff...

[boosted347]

justin ill be in town today/tonight if you wanna get that meth kit just lmk i should be able to swing by your house if that would be easier for ya :goodjob:

[justnprsh07]

i would like to get it now but it will half to wait till fri bc of vday but your more than welcome to come by because i would like to check it out

[boosted347]

aight man ill swing by you live by old beaver creek correct? And i feel ya on that one i just took the plung and got engaged so i feel your pain lol but what time you gonna be around, id love to check out the hatch

[justnprsh07]

ill be there around 7 if you want to swing by and it is by old beaver creek golf course do you know about where it is if not ill pm you directions

[-S Double C-]

aight man ill swing by you live by old beaver creek correct? And i feel ya on that one i just took the plung and got engaged so i feel your pain lol but what time you gonna be around, id love to check out the hatch

its called putting your foot down lol im engaged and do whatever i please

[nycclaye]

went to Newton, AL this past weekend to Auto-x.... ummmm.... yea..... I did NOT feel safe there... lol.. hell, I don't even think they sold black paint in that city!!!

[nycclaye]

its called putting your foot down lol im engaged and do whatever i please

will this be your first marriage? if so, i see why you "think" you do whatever you please. she's actually using her Jedi mind tricks on you so that you don't even realize that your wearing the pants, but she's pickin out the color :)

[-S Double C-]

nah player we've been down that rd before...as far as like cheating and shit yeah im not gonna disrespect her, but i go hang with the guys WHEN im ready or go do what i want when im ready. She is perfectly find as long as we spend a couple evenings to ourselves which is usually mondays and sundays. Luckly though i have a girl into cars, bikes and racing so that helps alot! She's wanting to build another motor and turbo her hatch again but im trying to talk her out of it LOL

[boosted347]

its called putting your foot down lol im engaged and do whatever i please

lol i was talking about having to buy the ring, that being why im tight on money atm lol, she understands i do car shit and hang out with "the guys" when i want, or really even have the damn time

[ultm8mind]

will this be your first marriage? if so, i see why you "think" you do whatever you please. she's actually using her Jedi mind tricks on you so that you don't even realize that your wearing the pants, but she's pickin out the color :)

Come on it's Sean you're talking about!! He's wearing the pants.....but they're hers, hahahaha...

[ultm8mind]

went to Newton, AL this past weekend to Auto-x.... ummmm.... yea..... I did NOT feel safe there... lol.. hell, I don't even think they sold black paint in that city!!!

I guess I just found my retirement home of record, lol..... Just kidding, when you going back though?

I'm a damn fool, forgive me.

[ash7]

Come on it's Sean you're talking about!! He's wearing the pants.....but they're hers, hahahaha...

hahaha! awesome bruce... :goodjob:

-jonathan

[k u r y i s]

Come on it's Sean you're talking about!! He's wearing the pants.....but they're hers, hahahaha...

http://i.dailymail.co.uk/i/pix/2008/07/05/article-0-01DB0A2200000578-810_468x568.jpg

i really did laugh out loud! yay bruce

[-S Double C-]

^^^^LMFAO

[ultm8mind]

thanks Jon and Rich, all in fun.....

[nycclaye]

so.... yea... i'm gonna miss the debut of the nicest EG hatch this weekend.... :(

[LIKEG6]

It's not the nicest lol just the gangsterest but nah that sucks man. Where will you be?

[-S Double C-]

WELL THIS MAN DECIDED TO CRANK HIS CAR WITH THE REMOTE START IN GEAR AND HAD BAD LUCK^^^

[kte324]

WELL THIS MAN DECIDED TO CRANK HIS CAR WITH THE REMOTE START IN GEAR AND HAD BAD LUCK^^^

oh my god.

[willard]

So does anyone here need a box for there car or some audio stuff done? hit me up. Also word is theres a b16 supercharger floating around out there. just sell me it come on LOL.

[justnprsh07]

It's not the nicest lol just the gangsterest but nah that sucks man. Where will you be?

im gonna half to see this bc i know theres already two real clean hatches in town almost three if the guy with scotts old hatch would take those ugly ass wheels off

[LIKEG6]

You gonna be out tonight jp?

[justnprsh07]

either tonight or tom night... or maybe both since the weather is finally gonna be nice