<<<Official Columbus, GA Discussion Thread>>>

[98tegCHICK]

He works at kysor/warren aka the manitowac company now
Oh ok. Used to have a friend that works there. Can't remember if he still does or not...


lol sometimes we work 5am-530pm 6 days a week then sun 5am to 130pm only cause they cant work us over 80 hours.
Wow, ok.


Soo...this is the first time I've been on IA since this whole black thingy here. I like this a lot....I really can dig this. =)


so how is everyone?

Yeah, I love the black, too. Looks so much better.

[k u r y i s]

You can't it depends on your rep points

The track was fun today even though it was ridiculously hot. Then I went straight to softball practice so I'm completely wore out now.

How was everyone elses day?

Greetings from PA, the land of bullshit. AutoX was mega weak.

I woke up to sprinkles at my house and, subsequently, she convinced me to spend a little extra time relaxing saturday morning before we got up. By the time we arrived down at the event, it was still 45 degrees and 30+ mph winds. Lots of bimmers spinning out.

Fastest car of the day: Evo 9, autoX prepped: 33.xxx seconds

Sunday was a really sick course, there was a section on towards the back of the track where most people were riding rev limiter in second gear for 2 or 3 seconds. It started to rain during the end of the third heat, so I dipped out and didn't get to see the finish, results or 'fun-runs'.

Faster cars were ~35-36 seconds

Hi, we should be visiting in june-ish :goodjob:

http://img59.imageshack.us/img59/2435/20100417030422.jpg

[98tegCHICK]

cold weather.. ugh :p

[99jdmLs]

i hate the cold weather, but i hate the heat to....i wish it would just stay around 70. 8)

anyone selling any suspension for a 92-94 civic or 94-01 teg?

[ash7]

anyone selling any suspension for a 92-94 civic or 94-01 teg?

Yes sir, i can sell mine for 500. :goodjob:

-jonathan

[ultm8mind]

Good other then tanger saying someone was out talking shit last night about i didnt order a turbo and i was making up excuses for why my car isnt running and that i made up the story about i possibly got ripped off....all i can say is PROOF!

http://i339.photobucket.com/albums/n466/SEANCC_album/002-5.jpg

And see me when i get off the dyno whoever you are and lets see if you can back your end up :)

...that was me and as for those illegible damn food stamps Sean, come on you're better than that. Just kidding, try to relax a little and take a day of and sleep in. You need it. Just kidding. But you are making excuses, haha, kidding again, you get insulted too easily, who cares what others think. When it's running, prove it to them. But seriously, take a day off......

[ultm8mind]

Rich (Pa) I should be visiting in June too...

[-S Double C-]

i think if someone has something to say tell me not a group of people the one night i decide not to come out.

[hondachik]

OKay....so how do I view who has left me rep points?

[lmr_Bseries]

:ninja:

[k u r y i s]

Rich (Pa) I should be visiting in June too...

Sweet dude, can't wait to chill with you guys again; I should be down with my GTI again this time.

[justnprsh07]

Welp indeed I need a s300 chip found out for sure last night mine is screwed

[k u r y i s]

Welp indeed I need a s300 chip found out for sure last night mine is screwed

http://www.italiaauto.com/files/potato_chip_148.jpg

[-S Double C-]

fnally got my tracking number for my turbo, ordered 1600cc injectors,a injector driver,hondata boost solenoid, and a msd sci box and msd blaster coil so ts looking like i i might get tuned by next weekend :)

[ash7]

fnally got my tracking number for my turbo, ordered 1600cc injectors,a injector driver,hondata boost solenoid, and a msd sci box and msd blaster coil so ts looking like i i might get tuned by next weekend :)

...thanks for telling us all what you ordered.

We were dying to know.
-jonathan

[UglyEFHatch]

fnally got my tracking number for my turbo, ordered 1600cc injectors,a injector driver,hondata boost solenoid, and a msd sci box and msd blaster coil so ts looking like i i might get tuned by next weekend :)

thats a bet i wish i could have just one whole day without something goning wrong with my car its a nitemare. replacing clutch today lol

[SoLJames95]

:ninja:

What did Scotty get you at power wise, how many pounds? y8 or y7?????? :ninja:

[UglyEFHatch]

and brooks i still dont know if we fixed my vtec cause when i went to test drive it my clutch shattered lol i guess i have alot of torque lol not !!

[kr3w108]

Lol
...thanks for telling us all what you ordered.

We were dying to know.
-jonathan

[LIKEG6]

Justin - Dang dude that's homosexual. We were wondering wtf happened when you were gone forever.

James - Logan has a y7 I'll let him tell you the numbers if he wants.

[UglyEFHatch]

Justin - Dang dude that's homosexual. We were wondering wtf happened when you were gone forever.

yea man you telling me if it aint one thing its another im having so much bad luck with this b series bout to make me go back stock forreal

[-S Double C-]

...thanks for telling us all what you ordered.

We were dying to know.
-jonathan

yeah well these folks around here seem to act like i was making up ordering a turbo and i couldnt afford it but yet i spent nearly as much for the rest of my stuff i needed before a tune :goodjob:

[ultm8mind]

OKay....so how do I view who has left me rep points?

It's called settings, upper right hand corner

Rich (Pa), possibly see you in June then

I hear you Sean, let the haters hate

Jon, we know you were dying to find out

Rich (Ga), you still suck, LOL.....

Brooks, everyone else, hold Columbus down for me

[99jdmLs]

so since you say i suck, i cant help hold down columbus? isee how it is....8P

[ultm8mind]

yeah well these folks around here seem to act like i was making up ordering a turbo and i couldnt afford it but yet i spent nearly as much for the rest of my stuff i needed before a tune :goodjob:

Sean, saying you bought something isn't proof, LOL. Just messing with you. I like getting you fired up. Just show these guys, who cares what people think as I've said time and time again. Buy it, build it, run it. You can buy me stuff too, if you have extra money laying around....

[ultm8mind]

so since you say i suck, i cant help hold down columbus? isee how it is....8P

Okay, maybe just this one time. Tell Paul wassup too and get back to work!!

[LIKEG6]

I'm trying to hold Columbus down for ya buddy. I've been sick today and yesterday though which sucks. Hopefully I'll be good tomorrow. I'm feeling a little better now.

[ash7]

Jon, we know you were dying to find out

... everyone else, hold Columbus down for me

I was! :) I have to know everything that's going on because i'm all about teh dramaz. And did you want me to hold down Birmingham for you? Or am i out of the Columbus Cool Club since i moved?

-jonathan

[ash7]

took a Citation CJ1 up for my Check Ride at work today - just a couple pictures from the ordeal.


http://i2.photobucket.com/albums/y44/hatch77/Aviation/yep.jpg

(yes, that is part of PCB below)
http://i2.photobucket.com/albums/y44/hatch77/Aviation/yepyepyep.jpg

g'night folks
-jonathan

[-S Double C-]

awesome beach pic bro, must be nice to fly planes lol

[ultm8mind]

Don't hit any runners with iPods on....

[99jdmLs]

Don't hit any runners with iPods on....

why not, those are worth 10 points......if they don't have ipods on you get bonus points

[ultm8mind]

why not, those are worth 10 points......if they don't have ipods on you get bonus points

Yeah, bonus is if they aren't wearing one. Too easy if they are, LOL.....

[99jdmLs]

now your catching on.....if you can just hit them with your side mirror and get it to fold in, then you get 50 points.

not gonna lie, im just a little bored today

[ash7]

why not, those are worth 10 points......if they don't have ipods on you get bonus points

I'd rather get the standard ten points and acquire a free iPod out of the deal...

:)
-jonathan

[98tegCHICK]

took a Citation CJ1 up for my Check Ride at work today - just a couple pictures from the ordeal.


http://i2.photobucket.com/albums/y44/hatch77/Aviation/yep.jpg

(yes, that is part of PCB below)
http://i2.photobucket.com/albums/y44/hatch77/Aviation/yepyepyep.jpg

g'night folks
-jonathan

How high up ya go? Take me up one day (when I get my chute) n lemme jump!

[ash7]

How high up ya go?

We didn't achieve 25k as planned due to cabin pressurization issues and lack of supply oxygen - we turned around over PCB and headed back at 17000. Jumping out of that jet isn't really advisable since you'd go straight down the port (#1) engine. :goodjob:

-jonathan

[SoLJames95]

I got my turbo today!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! :)

[kte324]

I got my turbo today!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! :)

got boost? The D's are taking over.

[SoLJames95]

got boost? The D's are taking over.

:yes:








(mine will be for sale in August) :goodjob: LOL

[mr.koupe]

twerbos !

[LIKEG6]

Cause we takin ovaaaaaaaaaaa one D at a time, cause we takin ovaaaaaaaaaaa

[99jdmLs]

ill take my k and b over your d.....and raise you an A and a C.

[SoLJames95]

Pshhhhh your k will never come back, cuz someone is lazy!!!!!!

[99jdmLs]

and ill repeat my self then...ill still take my k over your d. running or not. 8)

[SoLJames95]

and ill repeat my self then...ill still take my k over your d. running or not. 8)

This coming from someone that comes to work everyday looking for miscellanious plastic pieces for you teg; and I say hey Rich when you finsihing the RSX..........
YOUR EXACT words, *sigh* I dont know, I just dont have any motivation to do it. (as you chuckle to yourself and look on the computer for teg parts) :lmao:

[boosted347]

congrats man on gettin your turbo

[lmr_Bseries]

and ill repeat my self then...ill still take my k over your d. running or not. 8)



how about i take my D with AC and leave your k and call it a day:crazy:

[Buttons]

i wish i had a turbo. but i'll still take my jz

[ash7]

This coming from someone that comes to work everyday looking for miscellanious plastic pieces for you teg; and I say hey Rich when you finsihing the RSX..........
YOUR EXACT words, *sigh* I dont know, I just dont have any motivation to do it. (as you chuckle to yourself and look on the computer for teg parts) :lmao:

... funny thing is that he'd still take his busted-never-going-to-be-finished K series over a D series. :goodjob:

as would i.
-jonathan

[k u r y i s]

bah humbug

[SoLJames95]

... funny thing is that he'd still take his busted-never-going-to-be-finished K series over a D series. :goodjob:

as would i.
-jonathan


i BELIEVE YOU would take the car without a k over the D....

[egsn-95]

i like my lil d-series...

[kr3w108]

Good stuff sir.
ill take my k and b over your d.....and raise you an A and a C.

[justnprsh07]

What do all these letters mean

[k u r y i s]

What do all these letters mean

No power, lots of noise :D

[kte324]

What do all these letters mean

HHHHHHHHHHHHHHHHHHHHHHHHHHHHHH... Do you recongnize that one?

[-S Double C-]

Speaking of twerboz mine finally decided to show up. The dumb fucks sent me the wrong compressor housing though :( Ill deal with im not going through what i did to get it again.

http://i339.photobucket.com/albums/n466/SEANCC_album/001-5.jpg
http://i339.photobucket.com/albums/n466/SEANCC_album/002-6.jpg
http://i339.photobucket.com/albums/n466/SEANCC_album/004-4.jpg

[mr.koupe]

nice twerbo sean :goodjob:

[lmr_Bseries]

Speaking of twerboz mine finally decided to show up. The dumb fucks sent me the wrong compressor housing though :( Ill deal with im not going through what i did to get it again.

http://i339.photobucket.com/albums/n466/SEANCC_album/001-5.jpg
http://i339.photobucket.com/albums/n466/SEANCC_album/002-6.jpg
http://i339.photobucket.com/albums/n466/SEANCC_album/004-4.jpg



That's messed up that they sent you the same turbo off alex's car...at least you will spool quick:goodjob:

[kte324]

Hey Sean, let me get a Sprite!!!

[-S Double C-]

lol i want lag its a drag car not a street car full boost should be around 6k or so with my short gears and reving to 10k i should be fine if i can get out the hole :)

[hondachik]

Hiya


Great year to own a Honda eh?

[-S Double C-]

nice twerbo sean :goodjob:

thanks playa

[hondachik]

It's called settings, upper right hand corner

Rich (Pa), possibly see you in June then

I hear you Sean, let the haters hate

Jon, we know you were dying to find out

Rich (Ga), you still suck, LOL.....

Brooks, everyone else, hold Columbus down for me

Kiss my ass you burnt dick motherfucker. Asshole. Fuck off & kiss my black ass.






Gah I can't stand u.



















smooches. <3

[lmr_Bseries]

lol i want lag its a drag car not a street car full boost should be around 6k or so with my short gears and reving to 10k i should be fine if i can get out the hole :)



oh you going to be laging alright...you and teymur can hangout and lag all day with each other...just be careful when teymur gets on it he dont like to stay in his lane:crazy:

[-S Double C-]

LOL so i heard...

[harleyweise]

welll Sean like Logan said that's my turbo so I guess I'll be needing it back soon btw I NEED A SHORT GEARED D SERIES TRANNNNY help anyone and whats the plans for the weekend everyone?

[ash7]

just be careful when teymur gets on it he dont like to stay in his lane:crazy:

open differentials ftl?

-jonathan

[k u r y i s]

open differentials ftl?

-jonathan

http://www.atpturbo.com/root/releases/images/release123006/triple_threat_home.jpg

[ultm8mind]

Kiss my ass you burnt dick motherfucker. Asshole. Fuck off & kiss my black ass.

Gah I can't stand u.

smooches. <3

I can't stand you're white ass either, uggghhh. Kiss MY black ass in it's entirety. Thanks.

[99jdmLs]

I can't stand you're white ass either, uggghhh. Kiss MY black ass in it's entirety. Thanks.

your black???? and shes white? good grief.....obama has made a change hasnt he

[kte324]

open differentials ftl?

-jonathan

hah, last time I checked I had a Mfactory LSD...

[kte324]

http://www.atpturbo.com/root/releases/images/release123006/triple_threat_home.jpg

I've got one of those on my old push lawn mower.

Hamilton Equipment is actually working on the new engine below for my riding lawn mower. It's suppose to have a GT68842541R on it.

http://people.bath.ac.uk/ccsshb/12cyl/rta96c_crank.jpg

[kr3w108]

He never got hook on phonics sir. ..
.so no.
HHHHHHHHHHHHHHHHHHHHHHHHHHHHHH... Do you recongnize that one?

[k u r y i s]

I've got one of those on my old push lawn mower.

Hamilton Equipment is actually working on the new engine below for my riding lawn mower. It's suppose to have a GT68842541R on it.

http://people.bath.ac.uk/ccsshb/12cyl/rta96c_crank.jpg

Pshhh, I would have at least gotten a billet crank wheel.

Cheap ass...

[justnprsh07]

He never got hook on phonics sir. ..
.so no.

I have seen that letter before I just don't know where...

Sean why you posting pics of my turbo everyone has already seen it

Also I have 8 tickets to taladega and four to the big adrl in valdosta both for sat.

[justnprsh07]

Pshhh, I would have at least gotten a billet crank wheel.

Cheap ass...

When did you go to exospeed I told them I dint want anyone taking a pic of my h

[ultm8mind]

that's my new build, they let my secret out?? nothing is on the dl these days, geez.....

[mr.koupe]

Headed to pc 1/8th if anyone wants to come out....

[k u r y i s]

Headed to pc 1/8th if anyone wants to come out....

more of this 1/8th BS :(

[-S Double C-]

yeah fuck the red neck rivera

[k u r y i s]

g night

http://img193.imageshack.us/img193/6963/20100423171730.jpg

http://img19.imageshack.us/img19/6317/20100423164203.jpg

http://img90.imageshack.us/img90/3262/20100423160615.jpg

mmhmm

[ultm8mind]

booooOOOOOOOOoooooo, to VW's, LOL.

People still run the 1/8? Hmmmm....

[ultm8mind]

yeah fuck the red neck rivera

I'd go to chill, beach, fun, eye candy.....can't go wrong.

[ultm8mind]

I am at the beach now, LOL, just no water. But hey what can you do?

[k u r y i s]

Yay Volksfest, I'm actually entering the show this year.

So, wish me luck you a-holes :)

[LIKEG6]

Good luck dude.

I would say running the 1/8 is cause it's closer than reynolds, and you can practice your launch and 60ft times which is the most important part of the run anyways. I don't really the Phenix City track. They need to re-do and fix it up a little bit. I think more people would come out if they did that.

[Friggintitsman]

I am at the beach now, LOL, just no water. But hey what can you do?

Isn't this supposed to be 3ID's last trip to Iraq?

[Friggintitsman]

Wow look at all those negs

[k u r y i s]

booooOOOOOOOOoooooo, to VW's, LOL.



Hater hurtin; tell your single girl friends

[ultm8mind]

Isn't this supposed to be 3ID's last trip to Iraq?

doubt it, already have NTC scheduled for 2011.

Got attacked two nights in a row, wtf?!?! Tonights wasn't that bad though, unfortunately cannot say that for last nights......

[Friggintitsman]

doubt it, already have NTC scheduled for 2011.

Got attacked two nights in a row, wtf?!?! Tonights wasn't that bad though, unfortunately cannot say that for last nights......

Those bastards need to get another hobby.

[BadBlueBird]

Good luck dude.

I would say running the 1/8 is cause it's closer than reynolds, and you can practice your launch and 60ft times which is the most important part of the run anyways. I don't really the Phenix City track. They need to re-do and fix it up a little bit. I think more people would come out if they did that.

thats the truth, the last time I went it was a joke!

[UglyEFHatch]

well i got my car finally running right thanks to brooks, daniel, taymor, justin p, logan and sean. it took alot of hard work an time but its finally there lol maybe i can finally run them high 15's. EF hatch FTW.

[LIKEG6]

Glad to hear it dude.

[99jdmLs]

come into work today and i see a very clean 1991 acura NSX sitting in a bay.....i though it was pretty clean, perfect leather. not one scratch. then i realized how many miles it had on it- 41,000
i want one.

-that is all

[eg8foedoe]

got ride of the foe doe then gotta da teggy then got ride of that now gotta eg coupe . all these slow cars im never satisfied

[mr.koupe]

come into work today and i see a very clean 1991 acura NSX sitting in a bay.....i though it was pretty clean, perfect leather. not one scratch. then i realized how many miles it had on it- 41,000
i want one.

-that is all

late, saw it saturday :goodjob:

[kte324]

well i got my car finally running right thanks to brooks, daniel, taymor, justin p, logan and sean. it took alot of hard work an time but its finally there lol maybe i can finally run them high 15's. EF hatch FTW.

We got your back.

[k u r y i s]

dunno if i posted these or not

http://img169.imageshack.us/img169/3787/22534304051098553620403.jpg

my old wagon, 441whp @ 26 psi

http://img20.imageshack.us/img20/1857/gt2871r.jpg

[snowflake09]

come into work today and i see a very clean 1991 acura NSX sitting in a bay.....i though it was pretty clean, perfect leather. not one scratch. then i realized how many miles it had on it- 41,000
i want one.

-that is all

Saw this today......i stopped...i drooled a little....then i went on with the rest of my day pissed off...lol

[UglyEFHatch]

guess whats new i blow out my tire today yay!!! Not i must have a black cloud above me!

[kte324]

guess whats new i blow out my tire today yay!!! Not i must have a black cloud above me!

It's the vtec.

[ash7]

guess whats new i blow out my tire today yay!!! Not i must have a black cloud above me!

i agree with KTE, it's definitely the vtec.

-jonathan

[k u r y i s]

Jon, your new frims look nice

New shoes for me today

http://img29.imageshack.us/img29/8185/20100427170638.jpg

[SoLJames95]

Saw this today......i stopped...i drooled a little....then i went on with the rest of my day pissed off...lol

I've seen it since Saturday.... It made my day though. I was sad I was working by myself till it rolled in. :)

[SoLJames95]

:ninja:

[mr.koupe]

WHY IS PAULS CAR IN THE AIR STILL ?

[ash7]

http://img29.imageshack.us/img29/8185/20100427170638.jpg

very nice wheels, sir.

and thank you.
-jonathan

[SoLJames95]

HFDGAS

[UglyEFHatch]

It's the vtec.

LMAO only the fast one's blow tires getting some drag radail's for this weekend..

[ash7]

HFDGAS

why'd you delete the pictures of the torn apart NSX?

-jonathan

[k u r y i s]

why'd you delete the pictures of the torn apart NSX?

-jonathan

A couple of C32B's would pull a premium one week before race wars.

[SoLJames95]

i dont know....... :ninja:

[kte324]

A couple of C32B's would pull a premium one week before race wars.

haha.

[snowflake09]

Somebody buy my built dohc zc swap...$850...pm me if anybody is interested.

[ultm8mind]

Anybody a College Algebra genius and want to help me out? PM me and we'll talk. NEED help ASAP!!!!

[LIKEG6]

Carguy is good at math.

[k u r y i s]

I've had up to calc 5

[kte324]

What is Alegbra?

[ash7]

What is Alegbra?

:dunno:

-jonathan

[carguy07]

Anybody a College Algebra genius and want to help me out? PM me and we'll talk. NEED help ASAP!!!!


Carguy is good at math.

That would be me, I am a math major btw. PM me what you need help with and I'll see what I can do.


I've had up to calc 5

What do you consider calc 5? We only have multivariable (3) and differential equations (4) here. I guess complex variables could be considered calc based.

[-S Double C-]

i dont even know multiplication lol and never passed algebra

[SoLJames95]

5 out of 4 people have trouble with fractions..... :crazy:

[UglyEFHatch]

does anyone have 2 4 lug steelie's civic pattern with tires that i can buy. has to be a 14in or 15in

[SoLJames95]

I have some 16 inch OZ wheels with rideable tires......... Ill sell for 225 by 2marow. :)
http://i896.photobucket.com/albums/ac169/soljames95/66ee2614.jpg
This what they look like under the paint. :)
http://i896.photobucket.com/albums/ac169/soljames95/90619511.jpg

[ash7]

James, have you ever heard of the FS section? :rolleyes:

Or how about spelling class? (tomorrow)
-jonathan

[SoLJames95]

Well in that case they are there in F/S section, and last I checked proper nouns are suppose to be capitalize. ;)

- James

[k u r y i s]

came into college with a 5 on the AP calc (B?) so i started in 2

calc 2 = integrations
calc 3 = complex vars
calc 4 = 3D and I diff/inte
calc 5 = 'solutions to engineering problems'

diff eq's too but i can't remember what class, maybe 3? I used a lot of drugs in college....

Also had physics 3 and thermodynamic systems 3

[LIKEG6]

James lemme get them lol.

[LIKEG6]

Damn richard. All that stuff is just too confusing. I always just hated math so I just stuck to whatever I had to take lol.

[-S Double C-]

200 push ups in a day plus the gym for 45 mins is exhausting :(

[ash7]

deez nuts are exhausting.

haha?

hmm
-jonathan

[-S Double C-]

LOL! :rly:

[br@ndon]

dont see anyone posting on gen. tech so i decide to put here, help please.
had to get my crank pulley off, used a jaw puller, bolt wouldnt go in crank bolt hole. sooo i stick an extension in the bolt hole so the bolt on the puller will actually work somewhat. the extension is now stuck, tried everything i know, engines not even cranking and its turning over slow so im guessing the extension has jammed up against the crank.
new block or other options? pulling engine this weekend im sure so i can fix what i need to.

[k u r y i s]

Damn richard. All that stuff is just too confusing. I always just hated math so I just stuck to whatever I had to take lol.

Yeah math and science (except chem, organic 1 & 2 were my only B and C in college :() are my strong points.

Speling not so much

[ash7]

dont see anyone posting on gen. tech so i decide to put here, help please.
had to get my crank pulley off, used a jaw puller, bolt wouldnt go in crank bolt hole. sooo i stick an extension in the bolt hole so the bolt on the puller will actually work somewhat. the extension is now stuck, tried everything i know, engines not even cranking and its turning over slow so im guessing the extension has jammed up against the crank.
new block or other options? pulling engine this weekend im sure so i can fix what i need to.

oh my....

first off, you need to pray to jesus.

[chinese voice] and then - you need to drill a hole through the extension (I'm assuming it's a 1/2" type) and put some type of bolt through the hole.

[chinese] an thenn - you need to jam your flywheel with something (a flat blade screw driver would work)

[chinese] and theennn - you need to rotate the extenstion using whatever you can, like you're removing a screw.

if that doesn't work, try switching your prayers to Allah, and wail on it with an 8lb mallet in an attempt to work it back and forth out of the hole.

if that doesn't work - curse religion altogether, cut it as flush with the crank as you can and then drill it out. (hopefully it's a cheap extension so the steel is soft)

And now i'm all out of help.
-jonathan

[-S Double C-]

wtf is gen. tech LOL!

[kte324]

200 push ups in a day plus the gym for 45 mins is exhausting :(

this guy...

[ash7]

this guy...

hahahaha!

-jonathan

[UglyEFHatch]

this guy...

no no no it THAT GUY

[br@ndon]

oh my....

first off, you need to pray to jesus.

[chinese voice] and then - you need to drill a hole through the extension (I'm assuming it's a 1/2" type) and put some type of bolt through the hole.

[chinese] an thenn - you need to jam your flywheel with something (a flat blade screw driver would work)

[chinese] and theennn - you need to rotate the extenstion using whatever you can, like you're removing a screw.

if that doesn't work, try switching your prayers to Allah, and wail on it with an 8lb mallet in an attempt to work it back and forth out of the hole.

if that doesn't work - curse religion altogether, cut it as flush with the crank as you can and then drill it out. (hopefully it's a cheap extension so the steel is soft)

And now i'm all out of help.
-jonathan

thanks for the help, ive tried drilling in it as it sits now, thats not working. I have beat the crap out of it, it wont move. i do not want to buy another block but i guess thats my only option.

[ash7]

thanks for the help, ive tried drilling in it as it sits now, thats not working. I have beat the crap out of it, it wont move. i do not want to buy another block but i guess thats my only option.

i wouldn't admit defeat just yet bro. Soak the thing down with WD40 and leave it alone overnight - have you tried putting a ratchet or breaker bar on the end of the extension and twisting it out?

-jonathan

[br@ndon]

i wouldn't admit defeat just yet bro. Soak the thing down with WD40 and leave it alone overnight - have you tried putting a ratchet or breaker bar on the end of the extension and twisting it out?

-jonathan

i tried that, broke 3 of the sides of the extension where you stick in the ratchet. i will try the wd 40 but i dont know if that will even work cause i dont know if it will go down in the hole, i wont kick the bucket on it just yet if you say so.

[ash7]

i tried that, broke 3 of the sides of the extension where you stick in the ratchet. i will try the wd 40 but i dont know if that will even work cause i dont know if it will go down in the hole, i wont kick the bucket on it just yet if you say so.

As a last resort, you should consider pulling the engine and taking it down to C&B on Veterans... the machinist there is pretty good at little things like that... i wouldn't let him assemble an engine for me... but when it comes to stuff like that, he knows what's up.

-jonathan

[k u r y i s]

zip saw, then a little heat on the outside

then your 8lb mallet and a punch

[carguy07]

came into college with a 5 on the AP calc (B?) so i started in 2

calc 2 = integrations
calc 3 = complex vars
calc 4 = 3D and I diff/inte
calc 5 = 'solutions to engineering problems'

diff eq's too but i can't remember what class, maybe 3? I used a lot of drugs in college....

Also had physics 3 and thermodynamic systems 3

Yeah a 5 on AB would put you in calc 2, I did the same thing. Here your calc 3 & 4 are the same class. Solutions to engineering problems is probably close to Diff eq, it's a very applied course. Essentially the same work, but like I said most states do it differently.


Damn richard. All that stuff is just too confusing. I always just hated math so I just stuck to whatever I had to take lol.

Brooks I'll ruin your afternoon sometime talking about some of the math courses I have taken. Combinatorics is a ridiculous one that comes to mind, followed closely by Ring Theory and Sequences. :yes:

[LIKEG6]

Lol. Screw math. Who needs it? I just hated it so I never really tried too hard. Plus school pissed me off and is why I dropped out and got my GED anyway.

[justnprsh07]

He needed to do 400 if he had any hope at all... lol

[ash7]

Fortunately the biggest math used in aviation are various forms of Geometry - which was as far as i got in highschool after struggling with algebra for two years and finally passed with a 72 or something - went and aced Geometry...


go figure.
-jonathan

[k u r y i s]

Fortunately the biggest math used in aviation are various forms of Geometry - which was as far as i got in highschool after struggling with introduction to shapes and colors for two years and finally passed with a 72 or something - went and aced Geometry...


go figure.
-jonathan

corrected

http://eatthiscity.com/wp-content/upload/1251828129-i_see_what_you_fucking_did_there_bird.jpg

[ash7]

corrected

no, i passed shapes and colors in fifth grade. :goodjob:

-jonathan

[99jdmLs]

geoetry i made like a 79 in....algebra and trig i aced. and yet i hate math-

we all know what i made in spelling

[ash7]

we all know what i made in spelling

did you even take spelling?

-jonathan

[kte324]

I never went to school.

[ash7]

Rich (PA) - you need to use your engineering skills and build something like this. :)


http://www.youtube.com/watch?v=4PcL6-mjRNk&feature=fvw

makes me smile every time.
-jonathan

[ultm8mind]

Carguy, you can assist? Maybe Rich (Pa)?? I know Rich (Ga) has offered but if you guys are Math GENIUSES or have taken probably way more than you need for the work I need done, I would like to get your help on an online course I'm taking. You think that's a possibility?? PM me for details and I'll give you my number. I'll probably shoot you both PM's, that's how much I ned the help, LOL. Rich (Ga) I do appreciate it TREMENDOUSLY, but I need to do VERY good on this!!!


Thanks Bruce

[ultm8mind]

200 push ups in a day plus the gym for 45 mins is exhausting :(

I do 78 in 2 minutes slicky boy

[k u r y i s]

...so only Rich (Ga) offered his assistance. Looks like we have guys that could really help me out, but only Rich said he'd help. Thanks Rich. Thanks everyone else.... for nothing.

hahahahaha

yeah, fuckers

[kte324]

hahahahaha

yeah, fuckers

haha, if they can't help, then send me a pm. I'll set you straight.

[ultm8mind]

hahahahaha

yeah, fuckers

yeah man, I put that before I saw you guys having a debate. Although nobody offered except Richie, I was like maybe Ol Rich (Pa) or Carguy can assist. Rich (Ga) sent me the PM and I read it, then wrotew my nasty-gram, LOL. Then I said maybe that's your guys way of offering, maybe it wasn't, LOL, let me know either way. Rich (Pa) and CArguy you have PM's!!!!!

[ultm8mind]

...so, just got a call from my wife and she tells me while they were eating in Augusta someone busted out the window in our truck and stole my kids PSP's and games. What a fucked up thing to come out of eating and on a weekend they're trying to get away and enjoy themselves. Not sure what else they took yet, but you know kids will notice that type of thing first, LOL. Fucking thieving fucks.....

[Friggintitsman]

Today was one of those days that reminds me why I really hate the army. We sat around for 6 hours today while all the other platoons are released so we could get a 15 minute class on the standard for how our gear should be set up. The more insulting part about it was that we have a SOP that tells us everything that we need to know. Other than that I'm still loving this shit.

[Friggintitsman]

BTW Ultimate I got orders to Fort Knox, but I'm trying to swap them or use any connection I can find to get my orders changed to 3ID

[ultm8mind]

BTW Ultimate I got orders to Fort Knox, but I'm trying to swap them or use any connection I can find to get my orders changed to 3ID

Not sure if I know any 11A's that could assist Friggin, but I'll check around and you gotta love the group punishment mentality, LOL

Will, I got your PM and will get that email to you shortly, thanks man....

[LIKEG6]

Isn't Fort Knox gonna be like obsolete now? They are sending a shitload of stuff here to Ft. Benning.

[ultm8mind]

Actually, somebody is moving out of Knox but there is someone moving in also. So, obsolete nah, just changing as the rest of the Army does.......

[99jdmLs]

I don't rem if i ever did take one actually....

and not a prob brucie....just lmk if i can help at all.


whats everyone got going on tonight?

[snowflake09]

I don't rem if i ever did take one actually....

and not a prob brucie....just lmk if i can help at all.


whats everyone got going on tonight?

Si > Gsr

[99jdmLs]

^this kid will argue with a dang stop sign just to argue.....jeeze

[k u r y i s]

black magic mother fucker

[ultm8mind]

brown magic

[br@ndon]

pulled cv axle on passenger side today, i am guessin its transmission fluid leaked out or oil, is this ok? was not leaking before.

[Friggintitsman]

Not sure if I know any 11A's that could assist Friggin, but I'll check around and you gotta love the group punishment mentality, LOL

Will, I got your PM and will get that email to you shortly, thanks man....

My BC at OCS use to work up there on Kelly hill. Maybe if I work myself in with him he can pull some strings for me. That's all the plan I've got unless I can get a swap.

[kte324]

http://www.wardray.net/images/products/large/mr/fire_extinguisher.jpg

[justnprsh07]

Aww is that for me for my hott ass car or sean catching the shop on fire

[LIKEG6]

Catching the shop on fire?

[SoLJames95]

Someone get these wheels!!!!! Da saw blades with 95% tires and 16oz with crappy tires. Lol

[ultm8mind]

Will, you have an email man.

[justnprsh07]

Catching the shop on fire?

Yea sean decided to catch my shop on fire ill let him tell you how

[-S Double C-]

lol i was attempting to weld a fitting on a fuel pump cover with a fuel pump on it out a fresh tank and sparks and vapors/liquid dont mix hahaha!

[LIKEG6]

Lol you shoulda known better than that Mr. Magician. :lmfao:

[kte324]

lol i was attempting to weld a fitting on a fuel pump cover with a fuel pump on it out a fresh tank and sparks and vapors/liquid dont mix hahaha!


It was pretty funny and we were all standing around it like we never saw fire before.

[k u r y i s]

haha that happened to me and some buddys a little bit ago, but it was starting fluid and the snowmobile.

needless to say, it was exciting and mesmerizing

[-S Double C-]

lol i didnt pay any attention

[Friggintitsman]

I may have already asked this, but if I bring my RHD Prelude down here to Columbus are there any shops I can get some work done on it? Or any of you wanted to get it running for some cash?

Reply or PM

[hondachik]

Hai guys!

[hondachik]

haha that happened to me and some buddys a little bit ago, but it was starting fluid and the snowmobile.

needless to say, it was exciting and mesmerizing

What would happen if u pulled the trigger?






j/k. =)

[ultm8mind]

What would happen if u pulled the trigger?

j/k. =)

It's a squirt gun. Will got your PM thanks bro.

Friggin', there are a bunch of shadetree mechanics up in here, LOL. I am sure you could talk someone into helping you out.....

[-S Double C-]

I may have already asked this, but if I bring my RHD Prelude down here to Columbus are there any shops I can get some work done on it? Or any of you wanted to get it running for some cash?

Reply or PM

whats wrong with it?

[Friggintitsman]

whats wrong with it?

Well a rat got in it and ate some wires I think. It also needs some other minor work, but at this point I just need to get it running.

[justnprsh07]

Well a rat got in it and ate some wires I think. It also needs some other minor work, but at this point I just need to get it running.

I got ya on the lude

[-S Double C-]

I got ya on the lude

yeah get up with me and him and we will get it taken care of.

[justnprsh07]

O yea I finally got the tracking number for my roof today and for some reason they gave me 350 of the 850 back couldn't speek english well so I'm guessing it bc it took so long for them to get itor something

[harleyweise]

shit so you got a good deal then Justin lol

[snowflake09]

shit so you got a good deal then Justin lol

Go drink some muscle milk or somethin......lol jk

[snowflake09]

+2 for everyone i coould...lol Not much but it all helps..lol

[k u r y i s]

What would happen if u pulled the trigger?






j/k. =)



courage

[99jdmLs]

i miss my old car. 8(

http://i40.tinypic.com/6ib9tl.jpg

[ultm8mind]

that's what it's looking like these days?

[ash7]

i miss my old car. 8(

http://i40.tinypic.com/6ib9tl.jpg

then buy mine

-jonathan

[-S Double C-]

or mine lol i need a bike/truck or suv

[SoLJames95]

For Sale only!!!!!!!!!!!
Just thought I would let you guys know. :)
http://www.importatlanta.com/forums/showthread.php?243566-95-Integra-FS-FT

[-S Double C-]

mine might be sold if this dude wes gets his truck sold, then im gonna go buy a bike and truck

[SoLJames95]

IPhone pics :)
http://i896.photobucket.com/albums/ac169/soljames95/4acf90de.jpg
http://i896.photobucket.com/albums/ac169/soljames95/7b5e72e8.jpg
http://i896.photobucket.com/albums/ac169/soljames95/7f504ede.jpg
http://i896.photobucket.com/albums/ac169/soljames95/7e2ef8cb.jpg
http://i896.photobucket.com/albums/ac169/soljames95/40e9747c.jpg

[JDMTEG1990]

morning bishes off to the kia plant for some more work..

[kr3w108]

:goodjob:
IPhone pics :)
http://i896.photobucket.com/albums/ac169/soljames95/4acf90de.jpg
http://i896.photobucket.com/albums/ac169/soljames95/7b5e72e8.jpg
http://i896.photobucket.com/albums/ac169/soljames95/7f504ede.jpg
http://i896.photobucket.com/albums/ac169/soljames95/7e2ef8cb.jpg
http://i896.photobucket.com/albums/ac169/soljames95/40e9747c.jpg

[justnprsh07]

Pulled the head off last night and visibly there was nothing wrong with head or block or casket so wtf...

[kte324]

Pulled the head off last night and visibly there was nothing wrong with head or block or casket so wtf...

I'll get logan out there to check it.

[-S Double C-]

and what a fun time it was lol teymur i was already there :)

[kte324]

and what a fun time it was lol teymur i was already there :)

Oh snap, no comment.

[lmr_Bseries]

Oh snap, no comment.


:lmfao:


I think justin should just keep boosting on it and if that don't work than just spray nitrous on the radiator like spencer said :goodjob:

[justnprsh07]

:lmfao:


I think justin should just keep boosting on it and if that don't work than just spray nitrous on the radiator like spencer said :goodjob:


i tired to up the boost but it built to much pressure in the radiator so i sprayed nitrious in the motor an the radiator and on the intercooler and it helped put just cost to much... so i pulled the head off hopefully i can remember how to put it on but if not ill halla at you

[lmr_Bseries]

i tired to up the boost but it built to much pressure in the radiator so i sprayed nitrious in the motor an the radiator and on the intercooler and it helped put just cost to much... so i pulled the head off hopefully i can remember how to put it on but if not ill halla at you


ok that will work just get your people to get in touch with my people...when is your roof suppose to be here?

[justnprsh07]

not sure they were suppose to ship it out monday

[ultm8mind]

James the fo do don't look that bad slim. good stuff. Happy Cinco de Mayo, or should I say ! Feliz Cinco de Mayo! Haha, slackers.....

[snowflake09]

I know somebody wants some 15in Takata Green J Specials......lol Txt me or Pm me...

[-S Double C-]

kids and there drama these days are H-A-L-A-R-I-O-U-S

[snowflake09]

kids and there drama these days are H-I-L-A-R-I-O-U-S

Explain...

[-S Double C-]

im sure you will hear about it till then the ones or one who is starting shit needs to grow some balls and talk that shit to me. Oh and brooks congradulations on the interview, ill make sure you get the job, its all cake from here. You should start in about 2 weeks max.

[kte324]

im sure you will hear about it till then the ones or one who is starting shit needs to grow some balls and talk that shit to me. Oh and brooks congradulations on the interview, ill make sure you get the job, its all cake from here. You should start in about 2 weeks max.

who flexin?

[LIKEG6]

im sure you will hear about it till then the ones or one who is starting shit needs to grow some balls and talk that shit to me. Oh and brooks congradulations on the interview, ill make sure you get the job, its all cake from here. You should start in about 2 weeks max.

Thanks dude.

[BABY J]

What's the best place in Col 4 alignments on lowered cars?

[justnprsh07]

Fowlers will do tow but not camber... columbus spring will do both but won't guarantee it since its lowered

[kte324]

Fowlers will do tow but not camber... columbus spring will do both but won't guarantee it since its lowered

x2

[kr3w108]

X3 lol
x2

[LIKEG6]

What's the best place in Col 4 alignments on lowered cars?

Me

[ultm8mind]

him

[snowflake09]

Nobody wants Takata J specials or a dohc zc swap!?!?!?! lol

[ash7]

Nobody wants Takata J specials or a dohc zc swap!?!?!?! lol

I'll take the JSPLs


as long as they're free. :goodjob:
-jonathan

[snowflake09]

I'll take the JSPLs


as long as they're free. :goodjob:
-jonathan

Haha, ill trade you for your dr lookalikes?? (sorry i forgot the name of em...lol)

[-S Double C-]

ill take em for a low price and paint em :)

[snowflake09]

ill take em for a low price and paint em :)

Haha, not lookin to sell. Just trade for some 16's....

[ash7]

Haha, ill trade you for your dr lookalikes?? (sorry i forgot the name of em...lol)

those wheels are long gone, bro. i'm down to just the koseis in the 4x100 dept.

-jonathan

[snowflake09]

those wheels are long gone, bro. i'm down to just the koseis in the 4x100 dept.

-jonathan

Oh true true, well i guess if thats all you have ill take em. lolol


JK of course

[k u r y i s]

those wheels are long gone, bro. i'm down to just the koseis in the 4x100 dept.

-jonathan

thats a shame i have some k3 formula 5x114.3

[ash7]

thats a shame i have some k3 formula 5x114.3

that's awesome bro - OMGEEZ skeetskeetskeet?

-jonathan

[k u r y i s]

that's awesome bro - OMGEEZ skeetskeetskeet?

-jonathan

please don't 'skeet' at me brah, it's not sanitary :)

[ultm8mind]

5x114.3 huh? What do those look like?

[k u r y i s]

5x114.3 huh? What do those look like?

http://www.motorspeed.com/sitepix/products/kosei_k3_eg.jpg

[SoLJames95]

So a couple of us on here went to the track, and lets just say the fo door was raping. :rolleyes: Me and my innerfooler. Hey 10.8 in the SOHC wasnt that bad. lol

[GetFRESH!]

ATTENTION ALL:

I'm trying to get rid of some parts and such for pretty cheap.

I posted a little list of everything on page 3 of the Columbus WTB/WTT section.

Check it.

Word.



:cheers:

[justnprsh07]

Haha, not lookin to sell. Just trade for some 16's....


ill trade you some 16" supermesh gold with polished lip

[snowflake09]

ill trade you some 16" supermesh gold with polished lip

Alright im down, are they my old ones? lol Shoot me a text 706 617 4818

[hondachik]

Helloooo.


Sooo...anybody been makin' babies since I been gone?

[br@ndon]

couple questions since my last post about my dsm.
my extension got stuck in crank, so i got another block thats not in good enough condition to use but crank is fine.
i am going to try a swap somehow with cranks and see if that works.
i have oil pan off
bolts un done from the main thing thats on the block, this is my first time seeing this part, basically the block seperates somehow.
i need some further info, rods bearing are off so im just trying to get this thing out of here.

[k u r y i s]

couple questions since my last post about my dsm.
my extension got stuck in crank, so i got another block thats not in good enough condition to use but crank is fine.
i am going to try a swap somehow with cranks and see if that works.
i have oil pan off
bolts un done from the main thing thats on the block, this is my first time seeing this part, basically the block seperates somehow.
i need some further info, rods bearing are off so im just trying to get this thing out of here.

buy a haynes manual. front and rear main seals

http://www.dsmparts.com/customer/product.php?productid=191&cat=76&page=

[99jdmLs]

you are replacingyour block bc your extension is stuck on your crank? well ... replacing your crank. if you have never done something like that before i wouldnt recommend doing it. you will end up having to replace alot more once h finally get it running.

[k u r y i s]

you are replacingyour block bc your extension is stuck on your crank? well ... replacing your crank. if you have never done something like that before i wouldnt recommend doing it. you will end up having to replace alot more once h finally get it running.

x2 comin' in stereo from the Richs