Which shop in ATL makes good 3" exhausts?

[Axix23]

I am wondering what shop everybody is using as to make a custom 3" stainless steel exhausts? THanks...

[Vteckidd]

Mainstream is the only place i know that actually fabricates.

[EmminoDaGreat]

bc we are so gangstar.

[Axix23]

gotcha... :) thanks... And thats stainless steel piping they use? I don't want my shit rusting in 1 year... LOL

[EmminoDaGreat]

Its a Mild Stainless steel... haven't seen one come back rusted yet...

[Axix23]

aight, sounds good...

[scttydb411]

mine has been on for at least 2 if not 3 years...no rust yet. it's not bling polished stainless, but i wanted something a little more subtle (little flat black spray on the tip).

[dekalbsvt]

bought a car over 2 years ago that had a exhaust made by mainstream. no complaints.

[BTEC]

Im sick and tired of yawl asking who does this and that. Who does....Mainstream!!
Where can i....Mainstream!! Do you....Mainstream!! If i dnt wipe when i....Mainstream!!!

Gatdammit!!!!

[Tech5]

Well I have went to many exhaust shops before i got my Exhaust Binder/welder and most of them you can find some really good guys that can custom/fab most anything with exhaust!

[BTEC]

Well I have went to many exhaust shops before i got my Exhaust Binder/welder and most of them you can find some really good guys that can custom/fab most anything with exhaust!
With mandrel bent piping? :no:

Mainstream!!

[Neosoul]

yo mainstreem did my down pipe and its the hottest pipe so far for my setup

[Axix23]

anybody got pics. of mainstream custom built exhausts?

[BTEC]

i dnt have any and their site is dwn but the best thing for u to do is go get urs done so u can look at it anytime you want. IN HD (high definition)!! lol!!!

[scttydb411]

anybody got pics. of mainstream custom built exhausts?

if i drive my car to the shop i'll put it on the lift and snap some pics. it's pretty old and isn't bling polished, but you'll get the idea.

[scttydb411]

i'll have to look and see if they have pics of the porsche and ferrari exhausts they did.

[DarKStaR]

mm ferrari....whats the retail on one of those...

[scttydb411]

mm ferrari....whats the retail on one of those...

more than you can afford, pal. lol

[mp5o]

On my old mr2...


http://www.importatlanta.com/forums/attachment.php?attachmentid=86904&stc=1

[JBalla1036]

Lethal Injection has full in-house fabrication, from complete exhaust systems to headers/turbo manifolds to custom intake Manifolds w/wo ITB's, Complete Flow testing and Jett coating are also available

I'll make another thread with pics

Lethal Injection Motorsports FTW
770-343-9969

[Formally...]

I will have to find some other pics later. We have done plenty of RSX's.

Here is a pic from today where all three cars were getting custom exhaust.
3 blue SI's :D Which one does not fit? But it is still an "SI"
http://i250.photobucket.com/albums/gg250/mainstreamperf/car%20stuff/picture22201.jpg

[Axix23]

very nice, I'll be seeing you guys soon....

[Axix23]

holy shit, you guys are 48 miles away!!!!!!!!!!!! LOL thats far as shit!

[Allstar3.8T]

Grand Muffler in Marietta mandrel bends, and does custom piping for exhaust of I/C. They did a great job on the one they did for us.

[Xrated O.G.]

^^^ Grand Muffler has been doing custom fab piping for many many moons. I've had several cars up there done by Buster and the boys. Even though Buster doesn't own the business anymore their quality of work has never dropped off one bit. :cheers:

[Axix23]

grand muffler, hmmmmmmmmmm

[Tracy]

Batlground Fabricates – from intercooler pipes to exhaust to roll cages. You can find tons of pics in our gallery. www.batlground.com/gallery

[Vteckidd]

LOL We also Fabricate!

You think the name would say it all AutoFAB.... "FAB" as in Fabrication!!!:goodjob:

Well i was referring to IA Sponsors. Mainstream is prob the only Sponsor that regularly fabricates exhausts and other stuff.

Batlground can also do it as Brandon does an excellent job (dan does to but thats obvious) .

In terms of volume though i know mainstream does more.

48 miles isnt far

Oh and Grand Muffler is no more, they are something else now, they were sold or bought out

[Vteckidd]

Sorry Autofab since you arent a sponsor you cant post that kind of stuff.

[Autofab]

I think you need to talk to Paul!

[Autofab]

We do custom exhaust work all the time! All our exhaust work is Mandrel any size!


http://i87.photobucket.com/albums/k151/Autofab/Ruskiy/Picture007.jpg

http://i87.photobucket.com/albums/k151/Autofab/Ruskiy/Picture009.jpg

http://i87.photobucket.com/albums/k151/Autofab/Ruskiy/Picture012.jpg

http://i87.photobucket.com/albums/k151/Autofab/Ruskiy/Picture004.jpg

http://i87.photobucket.com/albums/k151/Autofab/Ruskiy/Picture005.jpg

http://i87.photobucket.com/albums/k151/Autofab/Ruskiy/Picture006.jpg

[EmminoDaGreat]

Everyone makes exhaust, just pick your spot. If mileage is a concern then go with whoever is close. Its obvious most shops here fab, and do it well, if not they would not be around.

[scttydb411]

if you take it to mainstream you could get the exhuast done and tuned on the same day.

[AlliRae]

atlanta performance and fabrication does a really good job... intakes, cages, anything

[redgst97]

I would give first look to the IA Sponsors as others have suggested.

Aside from the ones listed, I think Mahdavi also does this sort of work, and I would put them on the list of places to contact.

I have seen their work as they have worked on my cars, so they get a thumbs up from me. Additionally, I have seen the work of Mainstream and BATLgroud, and can give them both a positive report (MY opinion). I have not see the work of some of the other shops mentioned, but have heard good things.

[BTEC]

ive seen mainstreams work. ive been to mainstream. ive head of mainstream. You might wanna check out this place..called..dang ummmmm...oh MAINSTREAM!!!!

[TIGERJC]

Mainstream does great work, had my dp made and couldn't believe they were able to do such a good job without removing the turbo and the turnaround was a few hours

[Axix23]

48 miles isnt far

It is when your untuned and running open down-pipe... LOL... Annoying as hell on the hwy.. And I don't want to get fked by GA State Patrol... LOL

[Axix23]

We do custom exhaust work all the time! All our exhaust work is Mandrel any size!


http://i87.photobucket.com/albums/k151/Autofab/Ruskiy/Picture007.jpg

http://i87.photobucket.com/albums/k151/Autofab/Ruskiy/Picture009.jpg

http://i87.photobucket.com/albums/k151/Autofab/Ruskiy/Picture012.jpg

http://i87.photobucket.com/albums/k151/Autofab/Ruskiy/Picture004.jpg

http://i87.photobucket.com/albums/k151/Autofab/Ruskiy/Picture005.jpg

http://i87.photobucket.com/albums/k151/Autofab/Ruskiy/Picture006.jpg

Ummm, i dunno about those welds/piping connections... How come no shops around here have a tig welder? LOL

[Crosswyse]

I TIG all the exhaust I do.

Kyle
Lethal Injection
770-343-9969

[Tracy]

We use all diamond coated mandrel bent pipes that are tig welded. All of your purchases come with a 6 pack of newcastle. We will also throw in a 14k gold rolex if you get a dual exhaust.

















*disclaimer*
Just kidding.

[Axix23]

I TIG all the exhaust I do.

Kyle
Lethal Injection
770-343-9969

no shit?? Hell yeah... Whats yall's hours? Yall got any 3" resonators in stock?

[EmminoDaGreat]

we have a tig welder also, most shops wont tig exhaust unless you ask for it, as it usually takes longer, and therefore usually making price go up.

[Crosswyse]

no shit?? Hell yeah... Whats yall's hours? Yall got any 3" resonators in stock?

10-7 M-F
10-5 Sat

I might have one, give me a call on Sat. and i can check.

Kyle
Lethal Injection
770-343-9969

[Tracy]

we have a tig welder also, most shops wont tig exhaust unless you ask for it, as it usually takes longer, and therefore usually making price go up.It should be assumed that if someone says they fabricate, they have a tig welder. W3rd? W3rd. I know we on the same page. :idb:

[EmminoDaGreat]

Well, I think so. But he asked why no shops have a tig welder. I just told him what was up.

w3rd

[Tracy]

Well, I think so. But he asked why no shops have a tig welder. I just told him what was up.

w3rdOh w3rd. I missed that.

[Axix23]

LOL, i assumed nobody had a tig welder.. I would rather pay more for a good-looking quality weld that some cheap-crappy-ass welds that look like shit...

[Autofab]

It should be assumed that if someone says they fabricate, they have a tig welder. W3rd? W3rd. I know we on the same page. :idb:


Very true you would think any a shop that fabricates would have a tig welder.
We have both mig and tig.

[Tracy]

Very true you would think any a shop that fabricates would have a tig welder.
We have both mig and tig.w3rd. I guess us shop people just assume certain thangs.

P.S. Why is this – excuse my French – lousy thread so popular? Is business bad, I wonder???? Thank goodness we offer diamond coated exhausts. Disposable income customers FTW! :D

[Xrated O.G.]

Oh and Grand Muffler is no more, they are something else now, they were sold or bought out

You are right. "Grand Muffler" is no more. Buster sold out to someone else who stayed at that location under a new name. The facility itself is still up and running under new ownership. Buster has built a complete facility at his home and is still knocking out some of the best work ever done.


Shi-Peng just quit whining about how far and the GSP catching you and just take it to any of the above mentioned shops. All of them can get you what you want done.


On a side note if you take it up to BG just dont let Moby (aka Dan) catch you staring at Tracy's ass. He's super sensitive about her good looks.:cheers:

[Axix23]

You are right. "Grand Muffler" is no more. Buster sold out to someone else who stayed at that location under a new name. The facility itself is still up and running under new ownership. Buster has built a complete facility at his home and is still knocking out some of the best work ever done.


Shi-Peng just quit whining about how far and the GSP catching you and just take it to any of the above mentioned shops. All of them can get you what you want done.


On a side note if you take it up to BG just dont let Moby (aka Dan) catch you staring at Tracy's ass. He's super sensitive about her good looks.:cheers:


LOL, is Battleground in Smryna behind the old Smryna Nopi?

[BTEC]

LOL, is Battleground in Smryna behind the old Smryna Nopi?
no. they are on atlanta road. like a mile or so north of windy hill.

[Axix23]

oh, must got it mixed up somewhere

[BTEC]

We use all diamond coated mandrel bent pipes that are tig welded. All of your purchases come with a 6 pack of newcastle. We will also throw in a 14k gold rolex if you get a dual exhaust.

















*disclaimer*
Just kidding.
Now THAT was funny. lmao!!!

[SPOOLIN]

im curious as to why people care about tig vs mig on an exhaust? Its a dirty nasty metal exhaust. I know i don't care, now the underhood things like manifolds, piping, and down pipes are going to be tig'd in anything of mine.

Main Stream did my 4" exhaust and its nice as hell. :)

[eraser4g63]

Rob at MSPI did my exhaust about a year ago and it hold up to the 7's Hot ass exhaust with out any issues. By far the best exhaust I have ever had done.

[CHADbee]

i think i have some old pictures from when mainstream did the exhaust on my 1st neon. ill be back to see you guys again in the next month or so by the way :D

oh pictures here....

never mind i dont have them anymore LOL it looked good though :lmfao:

[DunDunSkeert]

advance autoparts...
http://shop.advanceautoparts.com/SearchResults.aspx?keywords=exhaust

[Axix23]

im curious as to why people care about tig vs mig on an exhaust? Its a dirty nasty metal exhaust. I know i don't care, now the underhood things like manifolds, piping, and down pipes are going to be tig'd in anything of mine.

Main Stream did my 4" exhaust and its nice as hell. :)


Prob. b/c I take it to shows and I like even the exhaust to look good like a normal aftermarkert exhaust.. :)

[Axix23]

advance autoparts...
http://shop.advanceautoparts.com/SearchResults.aspx?keywords=exhaust

Your funny man.. LOL

[Vteckidd]

Prob. b/c I take it to shows and I like even the exhaust to look good like a normal aftermarkert exhaust.. :)
for all those times the judges climb under the car right lol

[SPOOLIN]

lol i was thinking the same thing.

[ejohnson88]

Getting mine done my MSP tomorrow so will take pictures and let you know.

[Axix23]

for all those times the judges climb under the car right lol

Well, all the times when I go underneath my car and see the beautiful welds.. :)

[Z U L8R]

it's funny we're all jumping to do his exhuast.

we will do your exhaust and give you a build a bear here at Lethal

i'll make you a kung fu panda! SKADOOOSH!

LMFAO

Dave