sr5 to gts conversion

[nextgentc]

i was wondering how hard it would be to convert my 84 ae86 sr5 into a gts and what all would i need to do the conversion. and around how much money would it be to do it?

[dekalbsvt]

club4ag.com

^answer

[Me86Rob]

alot. you would need the motor, rear end, ecu, wiring harness, full interior, rear disc conversion, and im not sure if the tranny is the same for both, but i think so

[jdmjohn]

i was wondering how hard it would be to convert my 84 ae86 sr5 into a gts and what all would i need to do the conversion. and around how much money would it be to do it?

most people call this a gtsr5 conversion. it will best if you can find a wrecked gts somewhere and transfer all the parts to your sr5. or better yet sell your sr5 and get a gt-s :goodjob:

[FasTech]

Yeah, sell your sr5 and just buy a Gts. Alot easier.

[puregroove]

--just put a 3tc in that joint. :yes: :goodjob:

[SiRed94]

It's alot of work and pretty costly unless you have a wrecked donor gts or something. I've done it a few times. I took the easy way out on my coupe. I picked up a 4age and some individual bike carbs and stayed carbed. Just had to fab up a manifold, get a low pressure electric pump, a FPR, and rejet the carbs. It took a little bit of time tweaking the carbs and playing with the fuel pressure to get the mixture right, but still way easier and less time-consuming than F/I conversion.