what headers?

[jriley60]

what headers work with the b16a in the 4dr ef civic. my buddy is looking for some. i don't know so i figured i'd ask. and if anyone has some let me know : )

[KevinT707]

Any B-Series header will work, but with the 4-1 'JDM Type-R Style' (replica of the Type-R header) you will have to modify your crossmember by 'notching it'; most aftermarket header for an EF you will have to do that unless you get a 2 piece header (4-2-1) off Ebay or DC Sports or something.

[StraightSix]

what headers work with the b16a in the 4dr ef civic. my buddy is looking for some. i don't know so i figured i'd ask. and if anyone has some let me know : )

None, because a 4cyl. would use a header, singular, not the plural, headers implying an engine with more then a single bank of cylinders.

[DieselNuts]

None, because a 4cyl. would use a header, singular, not the plural, headers implying an engine with more then a single bank of cylinders.
LULZ REPS :goodjob:

[Papa_Smurf]

^ The troll is right.

I'd look into those $600 headers that KiddRacing is putting out. Say they gain crazy numbers, with dyno runs to prove it

[Vteckidd]

and they arent $600 they are much cheaper :)

[Papa_Smurf]

and they arent $600 they are much cheaper :)

woah, lol i JUST posted that.

you must have an active search for the word "kidd" on IA, haha :lmfao:

how much are they going for?

[Footefan52]

None, because a 4cyl. would use a header, singular, not the plural, headers implying an engine with more then a single bank of cylinders.

Your wrong... He was asking which headers would work. As in numerous different manifolds. And my 4 cylinder has headers. Horizontally opposed FTW.

[Papa_Smurf]

Your wrong... He was asking which headers would work. As in numerous different manifolds. And my 4 cylinder has headers. Horizontally opposed FTW.

no, you're still wrong.


what headers work with the b16a in the 4dr ef civic. my buddy is looking for some. i don't know so i figured i'd ask. and if anyone has some let me know : )

he was referring to him saying some, does anyone have "some" that will work, is physically impossible to fit multiple headers on a b16.

go somewhere :goodjob:

[Papa_Smurf]

but to the OP, yea, you will likely have to cut the cross member with many different headers, so just be aware of that before you decide to buy a header.

[bigdare23]

{shake head at thread}

Like kevin said, any b-series header will work. 1.6 headers (like from a 99 Civic Si or Del Sol Vtec) will give you more ground clearance then a 1.8 header. Do know that if the car is obd0 it used 2 o2s while obd1 and up cars uses only 1 so will have to do something with the other o2 if you plan on staying obd0.

[uproot]

OP, just send a message to Mr. Kidd, he can steer you in the right direction


link (http://www.importatlanta.com/forums/showthread.php?t=203506)

[LIKEG6]

Mr.Kidd's are good lookin and make good power

or you can get batlgrounds header

[jriley60]

thank you all:D for telling me which header it's not for me. so i'll tell my friend what he needs

[Papa_Smurf]

thank you all:D for telling me which header it's not for me. so i'll tell my friend what he needs

:tongue1:

[rbwdriven]

also what about clearance for the ac fan. I've seen alot that will not clear the ac fan as well as cutting the front cross member.

[Vteckidd]

I sell 3 different kinds.

FOr the B16 the new RMF Replica/KiddRacing header is best in terms of ground clearance and it is the best on power.

The Hytech Replica i sell the small tube and big tube, the smal tube is what you want, it is cheaper, but it doesnt make the same power an the ground clearance kinda sucks on a b16.

[rbf]

I sell 3 different kinds.

FOr the B16 the new RMF Replica/KiddRacing header is best in terms of ground clearance and it is the best on power.

The Hytech Replica i sell the small tube and big tube, the smal tube is what you want, it is cheaper, but it doesnt make the same power an the ground clearance kinda sucks on a b16.

We have 2 of what he sells VERY HAPPY w/results I might ad.:yes:

[Revmaynard]

Yo, clear your box so I can respond to your PM. (Jriley)