View Full Version : TB question???
N/A EK
11-22-2008, 05:52 PM
I have y8 throttle body and im missing the piece in the picture that i circeled red. What is that called??? And is it possible to use a different throttle body or just that piece from a diff. manifold? LMK if anyone has one for sale too, need ASAP :D
http://i273.photobucket.com/albums/jj212/TOPspecV/b16throttlebodyux6.jpg
Scotsman
11-22-2008, 05:53 PM
i have a z6 TB , $20
N/A EK
11-22-2008, 05:56 PM
i have a z6 TB , $20
Will that work? Do I have to modify anything , since that would be a OBD1 manifold TB...
Scotsman
11-22-2008, 05:57 PM
should work , but i may be wrong , i am assumin your car is obo2?
N/A EK
11-22-2008, 05:58 PM
should work , but i may be wrong , i am assumin your car is obo2?
yeah, im doing a mini- me swap y7 w/ y8 head and im missing that piece... I have a TB and everything but I cant do anything w/o that piece.
Scotsman
11-22-2008, 05:59 PM
shit , i dunno then , not sure on the diff between 1 and 2(obd)
N/A EK
11-22-2008, 06:05 PM
shit , i dunno then , not sure on the diff between 1 and 2(obd)
Yeah, idk... IM gonna ask around n see if it does. If it does, then ill get it from u :goodjob:
Scotsman
11-22-2008, 06:11 PM
sounds good , just lmk , its not goin anywhere
EmminoDaGreat
11-22-2008, 07:01 PM
That is the FITV.
scttydb411
11-23-2008, 10:11 AM
i believe the tb you have pictured is an obd0 not an obd2 tb.
N/A EK
11-23-2008, 02:34 PM
i believe the tb you have pictured is an obd0 not an obd2 tb.
thats a b16 tb... Its just a random pic i found
VickNotic
11-23-2008, 04:53 PM
you can use any TB on it i have a LS on my dseries motor
N/A EK
11-23-2008, 08:47 PM
you can use any TB on it i have a LS on my dseries motor
so all the plugs n hoses for the coolant will plug up?
Scotsman
11-23-2008, 08:49 PM
i saw your car at european kaffe tonight around 6pm
N/A EK
11-23-2008, 09:05 PM
i saw your car at european kaffe tonight around 6pm
The sentra?
Scotsman
11-23-2008, 09:07 PM
The sentra?yep
N/A EK
11-23-2008, 09:15 PM
yep
Yeah, Im working on the civic now... so the sentra is back on the road again :D
Scotsman
11-23-2008, 09:17 PM
Yeah, Im working on the civic now... so the sentra is back on the road again :Di was turnin left on 124 and looked over and saw the tag , is that place any good?
N/A EK
11-23-2008, 09:20 PM
i was turnin left on 124 and looked over and saw the tag , is that place any good?
I like it, i chill there all the time w/ friends
Scotsman
11-23-2008, 09:21 PM
I like it, i chill there all the time w/ friendsi've seen quite a few nice cars there , when it was warmer
N/A EK
11-23-2008, 09:28 PM
i've seen quite a few nice cars there , when it was warmer
yeah, there r some nice cars :D
Black4DrEK
11-24-2008, 11:49 AM
I have the throttle body to Y8 but its from an auto i think they are different..
Black4DrEK
11-24-2008, 11:51 AM
o yea is it for the four door in yur sig? if so when you get it runnin lets take some pics together!!!:camera:
j0nbunklah0m
11-24-2008, 11:54 AM
wat exactly is need for a mini me swap if u dont mind me asking?
N/A EK
11-24-2008, 04:37 PM
I have the throttle body to Y8 but its from an auto i think they are different..
yeah i think the auto is different but i could b wrong...
o yea is it for the four door in yur sig? if so when you get it runnin lets take some pics together!!!:camera:
Sounds good :goodjob:, it should b done by the end off this week (the swap).
N/A EK
11-24-2008, 04:40 PM
wat exactly is need for a mini me swap if u dont mind me asking?
This is for a 96-00 mini-me swap , idk about the 92-95 or 88-91.
-D16y8 Head
-D16y8 Intake Manifold
-D16y8 Throttle Body
-D16y8 Fuel Rail
-D16y8 Fuel Injectors
-P28 ECU ( May also use P2P ECU, I'll get into that later )
-An Intake Device. ( The new setup will put the Throttle Body on it's side, not up in the air. )
-Torque Wrench
-Head Gasket
-Copper Spray
-Intake manifold Gasket
-Throttle Body Gasket
-Exhaust Manifold Gasket
-Timing Belt
-Oil + Filter
-Coolant
-96-00 Honda Civic EX Spark Plugs
-Some Wire, and Wire Connectors
-Colored 3M Tape to mark Fuel Line, Vacume Lines, and Coolant Lines
-A box of Zip Lock Bags and a Sharpie. That way you know what bolts go where.
N/A EK
11-24-2008, 04:41 PM
So, can u use a obd-1 TB w/o having any problems to wire up some of the sensors on the TB????
Black4DrEK
11-24-2008, 07:10 PM
Sounds good :goodjob:, it should b done by the end off this week (the swap).[/QUOTE]
^ sweet, ill keep in touch. GLW the swap...
O yea i have a FLywheel if you want to add that to your swap. LMK
N/A EK
11-24-2008, 10:53 PM
Sounds good :goodjob:, it should b done by the end off this week (the swap).
^ sweet, ill keep in touch. GLW the swap...
O yea i have a FLywheel if you want to add that to your swap. LMK[/QUOTE]
Thx for the offer but i got a brand new one... i just need that stupid a$$ thing for the TB.
j0nbunklah0m
11-25-2008, 10:53 AM
so there is no kit need such as tapping for ls-vtec ?
N/A EK
11-25-2008, 04:34 PM
so there is no kit need such as tapping for ls-vtec ?
No, not for y7 w/ y8 head.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.