PDA

View Full Version : General Transmission Swap Questions



MattPwnt
11-18-2008, 09:44 AM
Just got some questions if your try to swap a manual transmission to an auto transmission or auto to manual. What kind of parts do you need, tools required cost, difficulty or any other info you can give me. Thanks

Barefoot
11-18-2008, 10:27 AM
Manual Pedal assembly
Manual ECU
Transmission
MTF
Clutch kit
Axles
Manual intermediate shaft
Flywheel
Flywheel bolts
Shift linkage w/shifter
Shifter bushings
Manual passenger side mount (honda)
Clutch cable or hydro lines
Misc. washers
Starter


edit : rear main seal

slimm
11-18-2008, 10:46 AM
ditto

MattPwnt
11-18-2008, 03:24 PM
Thanks guys.

LoveGirl
11-18-2008, 03:32 PM
Send your ECU to Phearable.net for an auto-manual conversion.

tank500999
11-18-2008, 06:10 PM
what kind of car is it? and what kind of motor? i know when i did my integra i need the get the conversion transmission mount from hasports, also if you deside to change your torque mounts get the mounts for the auto, the engine chassis are different between auto ans manual

Barefoot
11-18-2008, 10:15 PM
Send your ECU to Phearable.net for an auto-manual conversion.not really its pretty simple to do even for most people. as long as they have a good write up.

j0nbunklah0m
11-19-2008, 08:57 AM
best bet would be to buy the same car with a fucked up motor and use it for its parts

Barefoot
11-19-2008, 10:32 AM
best bet would be to buy the same car with a fucked up motor and use it for its partscheaper by far:goodjob::goodjob::goodjob::goodjob:

JBizzlebone
11-19-2008, 04:33 PM
Search is your friend mate. :D

Seriously, there's SHITLOADS of information out there on this topic. 30 mins of searching would get you all the info you need.