PDA

View Full Version : 86 Fox Roller



Matt300ZXT
11-16-2008, 06:44 PM
So I've got this 86 that's got most of an 87+ conversion done to it. 87+ rear 1/4s, front bumper, pin on cowl hood, seats, door skins, etc. The only thing 86 left is the dash some Mustang guys that have come to check it out have told me. I've got most of a GT body kit that'll go with it, I think all it's lacking is the rear bumper. It has a cracked rear pass. tail light but comes with another one to replace it. The previous owner says it has a 3.73 gear in it. It won't come with the motor/transmission/driveshaft. It will still have the pedals, the rearend, and various wires and such in the engine bay. It was converted to a carb so I don't know how much of the fuel injection electronics are left.

http://i40.photobucket.com/albums/e210/mxracer072004/car02.jpg


http://s50.photobucket.com/albums/f311/Matt300ZXT/Mustang%202/

There's a link to some more pics. It's been raining almost everyday for the past week here, and when it's been nice enough outside, I've been working on pulling the motor from my 280Z so I really don't see the point in rinsing the car off to get pics when it's only going to get dirty again.

The car is in Chattanooga, TN and is ready to be pushed up on a trailer and taken home with you. I'm asking $400 firm, or trading for hotrod 302 goodies, or a running small block Chevrolet that I can put in my 280Z.

03RCode
11-16-2008, 08:09 PM
Good potential here guys. Make someone a great track car.

Matt300ZXT
11-19-2008, 04:26 PM
C'mon meow...someone buy it

03RCode
11-19-2008, 04:27 PM
Did you just say meow?

Matt300ZXT
11-19-2008, 06:05 PM
Do I look like a cat to you, boy? Am I jumpin' around all nimbly bimbly from tree to tree? Am I drinking milk from a saucer? Do you see me eating mice?

Matt300ZXT
11-20-2008, 06:57 PM
Alright people, PM me with cash offers. I NEED to move this car very very very fast so I don't miss out on this sweet deal on a truck I found.

For example, if you don't want the hood, PM me with what you'd offer on the car without it, maybe we can deal. Or if you have GT tailights you wanna use, and wanna save a few bucks, offer me a price w/o the tails, maybe I could sell them seperately for a few bucks. I need to turn this thing around asap!

Matt300ZXT
11-21-2008, 09:11 AM
$300 w/o the hood or tails. You could pretty much get that or a little more selling it as scrap metal.

FasTech
11-21-2008, 06:53 PM
$300 w/o the hood or tails. You could pretty much get that or a little more selling it as scrap metal.


Sorry but you will never get anywhere near $300 at a scrap yard bud....... If you were alittle closer I'd buy it!

Matt300ZXT
11-21-2008, 07:14 PM
The average dollar amount per 100 pounds comes out to close to what I was asking. Just depends on which scrap metal place you take it to.

Where are you located? I can't be THAT far from you.

FasTech
11-21-2008, 08:16 PM
The average dollar amount per 100 pounds comes out to close to what I was asking. Just depends on which scrap metal place you take it to.

Where are you located? I can't be THAT far from you.




I'm not trying to start a fight or anything but down here in Macon,Ga scrap is close to $6 for every 100lbs. I took an old 89 prelude with an old motor and brought right at $200 and thats when it was $11 for every 100lbs.

But I'm in Macon, Ga.

jcs
11-21-2008, 08:19 PM
I'm not trying to start a fight or anything but down here in Macon,Ga scrap is close to $6 for every 100lbs. I took an old 89 prelude with an old motor and brought right at $200 and thats when it was $11 for every 100lbs.

But I'm in Macon, Ga.

its went down since that...the coupe wont bring shit.

FasTech
11-21-2008, 08:36 PM
its went down since that...the coupe wont bring shit.

I called peacocks and Macon Iron.... Both in the $5 to $6 range! And the other one over were the dog food plant was is only $4 :eek:


I'd really like to have that hood though!!!

Matt300ZXT
11-21-2008, 09:10 PM
I'd sell the hood seperately probably...but if you're going to be driving this far just to get the hood, why not take the whole car back with you? I'm not shipping that big ass hood lol

FasTech
11-21-2008, 10:36 PM
I'd sell the hood seperately probably...but if you're going to be driving this far just to get the hood, why not take the whole car back with you? I'm not shipping that big ass hood lol


Oh I was just saying I'd like to have it... I can't afford to come all the way up there right now...lol

Id this thing hasn't went anywhere, lets say a month at the most...I might find a way to come gather it off your hands.

Matt300ZXT
11-23-2008, 02:31 PM
$300 as it sits. Hood, tail lights, GT body parts, etc. Come get this damn thing someone, I'm going to get the truck Friday and it has to be gone before then or else I'm going to sell it to the scrap yard.

FasTech
11-23-2008, 05:08 PM
Damn hold the hood and I'll find some extra money and a way to meet or something... Scrap'n the hood would break my heart....haha


You wouldn't ship it and the passenger side corner light?

Matt300ZXT
11-23-2008, 05:42 PM
I think I've got someone taking the car off my hands now actually. But I'll post back if he buys it so anyone interested would know.

Matt300ZXT
11-24-2008, 03:35 PM
C'mon people, make an offer. Once again, as a reminder, it has to be gone in like a day or two.

Matt300ZXT
11-24-2008, 07:36 PM
So I'm about to call up a metal recycler tomorrow unless someone comes to get it.

One last effort....$200 as it sits, $150 without the GT parts (not installed on it anyway), $100 for car with no hood, tails, or GT parts. It has to be gone tomorrow, or very early Wednesday.

terrytowe22
12-17-2008, 07:07 PM
i will give u 275 for the shell with everything lmk?

silversol
12-17-2008, 08:12 PM
was this a v8 or 4 cyl? 8.8 rear end?

JuStCrUzIn
05-26-2009, 09:02 PM
i pmed you if you still have this hit me back.

JuStCrUzIn
05-26-2009, 09:06 PM
nevermind i see all the post were in 2008. my bad.

Sinfix_15
07-15-2009, 06:34 PM
have a title?

03RCode
07-15-2009, 06:40 PM
Shits been gone since before you joined this forum.