Um Wheel Barring?????

[dub_girl]

Hey... Not sure where I should post this but I need to put a wheel bearing on my back passenger tire. Anybody have any ideas how to do this and is it exspensive??? Or if somebody knows someone who can do it cheap let me know.....

[slostang]

go away.

[Psycho]

Hey... Not sure where I should post this but I need to put a wheel barring on my back passenger tire. Anybody have any ideas how to do this and is it exspensive??? Or if somebody knows someone who can do it cheap let me know.....
More than likely it's gonna be hella expensive, because it sounds like you got a custom part there. Now if you had wheel bearings instead, it would be a totally different story.

[Dietcoke]

Is a wheel barring like one of those clubs you put on the steering wheel so people dont steal your car?

[Catnip]

http://www.prestonservices.co.uk/Barring_Engine_2.jpg

does look expensive.

[Psycho]

http://www.prestonservices.co.uk/Barring_Engine_2.jpg

does look expensive.
Most of the cost is in the labor. After being asked to install one of these, a typical mechanic will add halogen fluid to your head lights, and reschedule your valve train if it's running late by more than an hour. All that stuff adds up.

[Echonova]

It not nearly as expensive as the wheel bearing I had to replace on the space saver spare. Because the rim is so tiny is takes a special bearing.

To replace yours should only run 100-500 dollars

[Me86Rob]

im posting here

[Psycho]

im posting here
Dude, seriously. We're trying to help spread some knowledge to this person obviously in need of it. Meanwhile, you come in here and make a mockery of it all. How childish.

[Catnip]

Seriously, lexiZ31.

[Catnip]

As far as cheap work, PM phantomsilvia

[dub_girl]

k.. thx.. :goodjob:

go away.

[dub_girl]

:crazy:Ok I accept the comments.. I now realize I am a total retard... If I spell it right will anyone help me?????
More than likely it's gonna be hella expensive, because it so
unds like you got a custom part there. Now if you had wheel bearings instead, it would be a totally different story.

[dub_girl]

I fixed it...... Thanks for the spell check...:goodjob:
More than likely it's gonna be hella expensive, because it sounds like you got a custom part there. Now if you had wheel bearings instead, it would be a totally different story.

[dub_girl]

Ty... Does cheap work mean I will probaly get what I pay for?????
As far as cheap work, PM phantomsilvia

[dub_girl]

Interesting....:boobies:





im posting here

[Psycho]

:crazy:Ok I accept the comments.. I now realize I am a total retard... If I spell it right will anyone help me?????
lol no

[dub_girl]

Not even if I show you :boobies: ?????
lol no

[dub_girl]

OMG!!!!! Thanks for running over my ego guys!!!!!!!:tongue1: :tongue1: :tongue1:
http://www.prestonservices.co.uk/Barring_Engine_2.jpg

does look expensive.

[dub_girl]

You guys are the best.. You make a girl feel loved... lol...

[Psycho]

Not even if I show you :boobies: ?????
Sorry, the chick I'm seeing right now has the most amazing rack I've ever seen, and I'm a connoisseur of bewbies. Anything else is just unimpressive.

[dub_girl]

Well... I cannot compete with best... I know when I am beat!!!! lol....





Sorry, the chick I'm seeing right now has the most amazing rack I've ever seen, and I'm a connoisseur of bewbies. Anything else is just unimpressive.

[dub_girl]

Slovic are u still here!!!!!!!

[slostang]

Sorry, the chick I'm seeing right now has the most amazing rack I've ever seen, and I'm a connoisseur of bewbies. Anything else is just unimpressive.

x2


well put.

[dub_girl]

I am real happy to hear that guys... I know most guys might say that as a front but when it comes down to it they looked and did not eventhey did.... Good Job!!!!!!:2cents:

[redrumracer]

Not even if I show you :boobies: ?????
depends, whos boobs?

[dub_girl]

Um... Not sure yet. Why you interested?
:crazy:



depends, whos boobs?

[redrumracer]

I am real happy to hear that guys... I know most guys might say that as a front but when it comes down to it they looked and did not eventhey did.... Good Job!!!!!!:2cents:
hey looking aint cheatin.

[redrumracer]

Um... Not sure yet. Why you interested?
:crazy:
well hell im always down to see some tittays. even old saggy ones. not that ill like em, but ill look

[dub_girl]

I know but I am a female and we think different then men... Ya know.. We trip on the littlest stuff...... :goodjob:




hey looking aint cheatin.

[dub_girl]

Well.... I am a little older then some of yal but mine are just right.. No sagging here...:goodjob:

[redrumracer]

I know but I am a female and we think different then men... Ya know.. We trip on the littlest stuff...... :goodjob:
i know yall are clumsy, thats why im against female drivers :crazy: :crazy: :crazy:

[redrumracer]

Well.... I am old but not old enough to have saggy titties...... :goodjob:
well then there is only one option.

[dub_girl]

I admit we can be but then again there are some of us that are pretty damn good at it....
i know yall are clumsy, thats why im against female drivers :crazy: :crazy: :crazy:

[dub_girl]

:boobies: :boobies: :boobies: :boobies: :boobies: :boobies:
well then there is only one option.

[redrumracer]

I admit we can be but then again there are some of us that are pretty damn good at it....
like danica patrick :lmfao: :lmfao: :lmfao: :lmfao: :no: :no:

[dub_girl]

I just read on your profile... What color is your Nova? I love Novas....
I admit we can be but then again there are some of us that are pretty damn good at it....

[dub_girl]

Nevermind... I know who she is now,,,,, And yes like her... Im better!!!!!:crazy:

like danica patrick :lmfao: :lmfao: :lmfao: :lmfao: :no: :no:

[redrumracer]

:boobies: :boobies: :boobies: :boobies: :boobies: :boobies:
those dont count we need real substance with ia identification along with the pic for proof of the real deal :boobies: :boobies: :boobies:

[redrumracer]

I just read on your profile... What color is your Nova? I love Novas....
its a couple different colors, ranging from burgandy to primer with a lil yellow and black mixed in too. its a project car.

and danica patrick is a race car driver, cant remember what series, but she sucks imo.

[dub_girl]

That sounds pretty fun.. I would not mind having one but I would probaly get in trouble. I usually do.... :police:
its a couple different colors, ranging from burgandy to primer with a lil yellow and black mixed in too. its a project car.

[redrumracer]

also how do you expect to receive help when we dont even know what you drive or the car your talkin bout?

[redrumracer]

That sounds pretty fun.. I would not mind having one but I would probaly get in trouble. I usually do.... :police:
yea if i can ever get back home to work on it. and police arent a problem. normally i either get it dropped there on the road or get it reduced a lot at court. but i have been ticket free for 3.5 years now

errr i meant 2.5 years

[dub_girl]

I guess that would help... It is a 1993 Honda Civic Ex.. Its the back passenger whhel that is roaring. I am slowly fixing it as I go.. She runs great though. I just totaled out my 2006 si about 4 or 5 weeks ago so I am sticking to my ex....
also how do you expect to receive help when we dont even know what you drive or the car your talkin bout?

[dub_girl]

Congrats on the ticket thing. I actually just finished defensive driving a few weeks ago to get my license back for a points suspension. Where are you that you cant work on your car?




yea if i can ever get back home to work on it. and police arent a problem. normally i either get it dropped there on the road or get it reduced a lot at court. but i have been ticket free for 3.5 years now

[redrumracer]

I guess that would help... It is a 1993 Honda Civic Ex.. Its the back passenger whhel that is roaring. I am slowly fixing it as I go.. She runs great though. I just totaled out my 2006 si about 4 or 5 weeks ago so I am sticking to my ex....
well this is the part where i tell you i dont have a clue............. yet. well i would know how if i knew what it looked like/whether its a pressed in bearing or not.

[dub_girl]

Ouch... I am not real sure... I think its pressed... I was told that anyways by my brother..
well this is the part where i tell you i dont have a clue............. yet. well i would know how if i knew what it looked like/whether its a pressed in bearing or not.

[redrumracer]

Congrats on the ticket thing. I actually just finished defensive driving a few weeks ago to get my license back for a points suspension. Where are you that you cant work on your car?
its at my parents house and im over 160 miles away at school. oh and you will have to replace the whole assembly do you have abs, and is it drum or disc in the back?

[dub_girl]

I believe it is disc....I already have the disc brakes to replace when I work on the Bearing...
its at my parents house and im over 160 miles away at school. oh and you will have to replace the whole assembly do you have abs, and is it drum or disc in the back?

[dub_girl]

Ok... I am gonna hit the sack.. Have to work tomorrow. I look forward to chatting with you more redrum.....

[redrumracer]

Ok... I am gonna hit the sack.. Have to work tomorrow. I look forward to chatting with you more redrum.....
ok and make sure you find out about the abs. that makes a considerable difference on the price.

[dub_girl]

Ok.. Thx. My name is Michelle by the way.. Nice to meet you..
ok and make sure you find out about the abs. that makes a considerable difference on the price.

[slostang]

lulz

[§treet_§peed]

Most of the cost is in the labor. After being asked to install one of these, a typical mechanic will add halogen fluid to your head lights, and reschedule your valve train if it's running late by more than an hour. All that stuff adds up. don't forget the blinker fluid and the v-tec fluid

[Psycho]

Looks like redrumracer is trying to hit it off with dub_girl. I just hope he knows what he's getting into...

http://i33.tinypic.com/2lu5npw.jpg

[dub_girl]

Your funny Physco... Your mom takes great pics by the way....:goodjob:






Looks like redrumracer is trying to hit it off with dub_girl. I just hope he knows what he's getting into...

http://i33.tinypic.com/2lu5npw.jpg

[Ed]

for your reference, this goes in the general tech area.

it seems that the title is pretty straight forward but...

[dub_girl]

Sry bout the confusion..... :thinking:
for your reference, this goes in the general tech area.

it seems that the title is pretty straight forward but...

[AnthonyF]

I do not know if the answer has been given to you. Seems like a bunch of T.W.'s in here.

You will need to have a Press to remove the old bearing out. Doing it yourself with a hammer is not an option. This type of job is around 100-150 w/ you supplying the part.

-Ant.

[dub_girl]

Ty... I finally got a str8 answer... I really do appreciate that. How long do you think it will take?




I do not know if the answer has been given to you. Seems like a bunch of T.W.'s in here.

You will need to have a Press to remove the old bearing out. Doing it yourself with a hammer is not an option. This type of job is around 100-150 w/ you supplying the part.

-Ant.

[AnthonyF]

Ty... I finally got a str8 answer... I really do appreciate that. How long do you think it will take?

You said drivers side rear correct?

If it has disc brakes: 0.9 HRS
If it has drum brakes: 0.7 HRS

These times are right out of our Mitchell OnDemand estimator at my shop.

-Ant.

[dub_girl]

Ty... very much.. I am going to be doing alot to this car so I am real glad you helped me.... Later




You said drivers side rear correct?

If it has disc brakes: 0.9 HRS
If it has drum brakes: 0.7 HRS

These times are right out of our Mitchell OnDemand estimator at my shop.

-Ant.