japan4racing
11-09-2008, 08:40 AM
dual bosch 044 fuel pump set-up:
1 bnib aeromotive fpr new
2 -8 prolite feed lines
2 mallory FI filters
2 bosch 044 pumps
2 -8 steel braided lines
Magnafuel -8 to -10 Y distribution block
2 -10 AN to Flare fittings new
12ft of Moroso Alum 5/8th hard line
Aeromotive fuel filter
-8 steel line to rail
-6 return line
-6 banjo fitting back into tank.
$650 obo sump is not included
http://i133.photobucket.com/albums/q52/japan4racing/100_1449.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1450.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1452.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1453.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1455.jpg
95 gsr head:
hot tanked and crack checked
port-flow stage 3 port and polish
supertech stainless steel nitride coated valves
3 angle competition valve job
combustion chambers deshrouded and shaped
new valve seals
supertech dual valve springs
supertech titanium retainers
this head came straight from laskey racing and was never used. im done with honda's so this has to go. here is alink so you can see the cost of this build. keep in mind i used my own gsr head so the price you see is what it cost to build this head http://laskeyracing.com/shop/portflow.htm . once again this head was never used. $1400 obo this price is more than fair considering the amount of money it would take to build this same set-up.
http://i133.photobucket.com/albums/q52/japan4racing/100_1446.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1226.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_12122.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_12132.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1147.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1146.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1144.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1143.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1142.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1141.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1140.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1139.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1138.jpg
obd-1 gsr distributor with msd cap, msd 6al box, msd blaster coil, msd wires $300 obo
http://i133.photobucket.com/albums/q52/japan4racing/100_1280.jpg
act AI4-XXG6 clutch kit maxx xtreme pressure plate and 6-puck sprung race disc. retails for $660....im giving it away at $450! that price is firm. this has never been used. the pressure plate has been un wrapped but never mounted disc is still wrapped.
http://i133.photobucket.com/albums/q52/japan4racing/100_1043.jpg
-10 an hose and fittings..pm me what you want
http://i133.photobucket.com/albums/q52/japan4racing/100_1049.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1048.jpg
also have the following items but now pictures just yet. my camera is jacked up. please pm or text me for pics on the following items:
un-cut 95 gsr harness very complete $115
stewart warner shiftlight/digital tach $100
stewart warner fuel pressure guage and sender $75
bdl 72mm throttle body and vacuum spacer comes with tps..no map $300
summit battery relocation kit - $50..only 1 left!
b series axles $50 each
obd-1 b series alternator $75
most prices are obo but please be reasonable. pm me here to ask any questions or text me at 478 550 8304. i am located in perry ga and i am willing to meet half way but no further. if we cannot meet half way i will ship anything at your expense..you will pay actual shipping charges.
1 bnib aeromotive fpr new
2 -8 prolite feed lines
2 mallory FI filters
2 bosch 044 pumps
2 -8 steel braided lines
Magnafuel -8 to -10 Y distribution block
2 -10 AN to Flare fittings new
12ft of Moroso Alum 5/8th hard line
Aeromotive fuel filter
-8 steel line to rail
-6 return line
-6 banjo fitting back into tank.
$650 obo sump is not included
http://i133.photobucket.com/albums/q52/japan4racing/100_1449.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1450.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1452.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1453.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1455.jpg
95 gsr head:
hot tanked and crack checked
port-flow stage 3 port and polish
supertech stainless steel nitride coated valves
3 angle competition valve job
combustion chambers deshrouded and shaped
new valve seals
supertech dual valve springs
supertech titanium retainers
this head came straight from laskey racing and was never used. im done with honda's so this has to go. here is alink so you can see the cost of this build. keep in mind i used my own gsr head so the price you see is what it cost to build this head http://laskeyracing.com/shop/portflow.htm . once again this head was never used. $1400 obo this price is more than fair considering the amount of money it would take to build this same set-up.
http://i133.photobucket.com/albums/q52/japan4racing/100_1446.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1226.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_12122.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_12132.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1147.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1146.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1144.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1143.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1142.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1141.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1140.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1139.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1138.jpg
obd-1 gsr distributor with msd cap, msd 6al box, msd blaster coil, msd wires $300 obo
http://i133.photobucket.com/albums/q52/japan4racing/100_1280.jpg
act AI4-XXG6 clutch kit maxx xtreme pressure plate and 6-puck sprung race disc. retails for $660....im giving it away at $450! that price is firm. this has never been used. the pressure plate has been un wrapped but never mounted disc is still wrapped.
http://i133.photobucket.com/albums/q52/japan4racing/100_1043.jpg
-10 an hose and fittings..pm me what you want
http://i133.photobucket.com/albums/q52/japan4racing/100_1049.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1048.jpg
also have the following items but now pictures just yet. my camera is jacked up. please pm or text me for pics on the following items:
un-cut 95 gsr harness very complete $115
stewart warner shiftlight/digital tach $100
stewart warner fuel pressure guage and sender $75
bdl 72mm throttle body and vacuum spacer comes with tps..no map $300
summit battery relocation kit - $50..only 1 left!
b series axles $50 each
obd-1 b series alternator $75
most prices are obo but please be reasonable. pm me here to ask any questions or text me at 478 550 8304. i am located in perry ga and i am willing to meet half way but no further. if we cannot meet half way i will ship anything at your expense..you will pay actual shipping charges.