1995 GST

[Bomex269]

i have a 1995 Mitsubishi Eclipse GST should i go with Greddy, HKS or another brand

[crxsiguy]

if your talkin about exhaust i would go with Apex-i if your talkin about bov i would go with HKS first (ssqv) or i would go with greddy type S I have a GSX and i have had most bov's and those are my fav..

[RandomGuy]

what if hes talking bout a turbo upgrade kit ... lol

[Bomex269]

i have the hks ssq bov and the injen cai on the way

[YokotaS13]

bwahaha there is no CAI for dsms

[Jon00]

bwahaha there is no CAI for dsms

lol your fucking dumb my friend

[Jon00]

what if hes talking bout a turbo upgrade kit ... lol

lets hope not

[YokotaS13]

lol your fucking dumb my friend
nope only cai is for the 420a, which isnt a dsm in my book

the turbo cars do not have a manufactured cai, unless you make your own, but then you have to have a FMIC with short route piping, and make your own to go through the stock sidemount area,

You are dumb my friend

[Jon00]

that was copyed from nopi.com my friend who is dumb now
Tube Style Cold Air Intake System - Turbo w/ Aftermarket Blow Off Valve - POLISHED

[YokotaS13]

there isnt a CAI period, i dont care what the worst place in the world for knowing shit says

[YokotaS13]

http://www.nopionline.com/nopistore/dsp_parts.cfm?vpcid=948&vcatid=0030&vcatyear=1997&vmodelid=015&vmakeid=250&vL1id=0&&vtitle=MITSUBISHI Eclipse 1997

nowhere does it say there is a CAI for turbo all non turbo

[JDMBeau]

you can have a pipe ran from the intake side of your turbo, alot of people cosider that a CAI.

[YokotaS13]

but theres no way to do an actual CAI you cant get out of the engine bay without removing the SMIC

[Jon00]

but theres no way to do an actual CAI you cant get out of the engine bay without removing the SMIC

lol im not going to waste my time with a honda owner LATER

[YokotaS13]

listen her eyou fucker, just because i own a honda, doesnt mean i dont know my DSM shit.
Its more like im not going to waste my time with someone who thinks they know what they are talking about becuase they like what Nopi says.

Go to a real seller, RRE, slowboy, machv

[Jon00]

listen her eyou fucker, just because i own a honda, doesnt mean i dont know my DSM shit.
Its more like im not going to waste my time with someone who thinks they know what they are talking about becuase they like what Nopi says.

Go to a real seller, RRE, slowboy, machv

LOL HAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA HAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA list here you fucker (lol) i owned one of the fastest 2g around THAT i built my self till i sold it to a remember here on IA so why dont u just go fuck yourself with your ugly as del sol :2up:

[YokotaS13]

i dont give a fuck what you built, but apparently you blindly did it thinking there is a CAI for a dsm.

And my del sol is ugly, but thats besides the point.
Lets see pics and specs mr fast

[Jon00]

i dont give a fuck what you built, but apparently you blindly did it thinking there is a CAI for a dsm.

And my del sol is ugly, but thats besides the point.
Lets see pics and specs mr fast

lol i sold the car over a year ago there are pics of my old 2g :2up: :D

[YokotaS13]

wow looks kinda stock with an N1 exhaust, but thats the beauty of a dsm. whats the rest of the mod list to make you the fastest?

[Jon00]

wow looks kinda stock with an N1 exhaust, but thats the beauty of a dsm. whats the rest of the mod list to make you the fastest?

LOLOLOLOLOLOLOLOL

1g JDM swap
cp pistons
crower rods
sleeved block
rebuilt head ported and polish
HKS CAMS AND CAM GEARS
custom intake manifold
dsm link
720CC injectors
walbro 255 intake fuel pump
T3/T4 48. ar 67 trim
fullrace turbo manifold
tail 38 mm waste gate
greddy type R bov
blitz intercooler custom piping
apexi n1 cat back
apexi 3in down pipe custom fit to fit the new setup

and it still goes i just dont remember it all

[YokotaS13]

what was the spoolup time on that t3/4? Im thinking of going with one of those on a car im building for a guy

(im not hatin on you, i just dont like people talking shit that cant back it up, but there still isnt a cai on a dsm)

[Jon00]

wow looks kinda stock with an N1 exhaust, but thats the beauty of a dsm. whats the rest of the mod list to make you the fastest?


and get your SHIT RIGHT I DIDNT SAY THE FASTEST i said ONE OF THE fastest 2gs around

[YokotaS13]

: shrug : i meant to put one of the fastest, whatd you run 11s?

[Jon00]

what was the spoolup time on that t3/4? Im thinking of going with one of those on a car im building for a guy

(im not hatin on you, i just dont like people talking shit that cant back it up, but there still isnt a cai on a dsm)

i was at full boost at about 3,5k 3,8k with out the cams it was like almost 4k

[Jon00]

: shrug : i meant to put one of the fastest, whatd you run 11s?

yep around there i was tuned for 28 psi for the track

[Jon00]

wow looks kinda stock with an N1 exhaust, but thats the beauty of a dsm. whats the rest of the mod list to make you the fastest?

lol it was a sleeper

[YokotaS13]

im building a evo3 16g based DD for a kid that should be high to mid 12s. Just bolt ons, he doesnt want to go into cams or rebuilds, im tryign to get him to go HKS 272.264 but he wont lol

[Jon00]

im building a evo3 16g based DD for a kid that should be high to mid 12s. Just bolt ons, he doesnt want to go into cams or rebuilds, im tryign to get him to go HKS 272.264 but he wont lol

lol same cams i had. i loved them

[YokotaS13]

he doesnt want to sacrifice "reliability" and he seems to think (keep in mind im building the car) that it will. I dont think it will, it will idle a lil diff but thats all he will notice

[B16a2 Civic]

awww, they made up and are now friends :slap:

[YokotaS13]

:eye:

[B16a2 Civic]

Lol...well...it is just a neon

[YokotaS13]

of course

[Jon00]

lol

[Kevykev]

awww, they made up and are now friends :slap:


:lmfao:

lol!

[ThrowBack]

...