View Full Version : manbdrel pipe bender
1 SICK GT
09-07-2005, 03:36 PM
who has a mandrel pipe bender in atlanta
also who has a cnc machine
1 SICK GT
09-07-2005, 03:38 PM
HOWS THE KIT COMING?
still working on it. i jus need someone the can bend 18mm piping and cnc me some custom endlinks
HiPSI
09-07-2005, 03:38 PM
who has a mandrel pipe bender in atlanta
also who has a cnc machine
cnc what machine? cnc pipe bender? cnc lathe? cnc mill?
Xrated O.G.
09-07-2005, 03:39 PM
Grand Muffler in Marietta. They have been doing the best piping I have seen in a LONG time...
1 SICK GT
09-07-2005, 03:41 PM
cnc what machine? cnc pipe bender? cnc lathe? cnc mill?
wants some custom billet endlinks made
1 SICK GT
09-07-2005, 03:42 PM
Grand Muffler in Marietta. They have been doing the best piping I have seen in a LONG time...
do they have a mandrel bender or the regular crush pipe bender
i need a mandrel bender it's for a custom size rear sway bay (18mm)
speedminded
09-07-2005, 03:46 PM
who has a mandrel pipe bender in atlanta
also who has a cnc machineThere's a muffler shop in Norcross on Buford hwy...just north of Jimmy Carter on the left across from the road that goes back to Tiger Racing. Newer brick building with 3 or 4 bays...I can never remember the name of the place but he's got a couple $10k+ hydraulic mandrel benders than can do some nice work...
For the CNC work i'd contact one of the tech schools, gwinnett tech or lanier...i think they all can do it for cheap. Rudy at Rudy's Honda & Acura in Gainesville has a good connection on CNC'ing too, i'm designing a/c and power steering brackets on AutoCAD to get done eventually...
do they have a mandrel bender or the regular crush pipe bender
i need a mandrel bender it's for a custom size rear sway bay (18mm)
BUSTER DNT USE NO DAMN CRUSH BENDER.
1 SICK GT
09-07-2005, 03:49 PM
here's a pic of some billet endlinks as a example
http://www.hotchkistuning.com/bin/images/products/Subaru/25407_lg.jpg
here's a pic of some billet endlinks as a example
http://www.hotchkistuning.com/bin/images/products/Subaru/25407_lg.jpg
HOW MUCH DO THOSE COST?
1 SICK GT
09-07-2005, 03:52 PM
HOW MUCH DO THOSE COST?
i don't know they are for a wrx
i don't know they are for a wrx
OH. U MIGHT WANT TO LOOK IN JEGS OR CHECK IN BARNETT BC GETTING THOSE CUSTOM MADE BY SOMBODY PROLLY GONNA BE KINDA EXPENSIVE.
Jon00
09-08-2005, 10:39 AM
There's a muffler shop in Norcross on Buford hwy...just north of Jimmy Carter on the left across from the road that goes back to Tiger Racing. Newer brick building with 3 or 4 bays...I can never remember the name of the place but he's got a couple $10k+ hydraulic mandrel benders than can do some nice work...
For the CNC work i'd contact one of the tech schools, gwinnett tech or lanier...i think they all can do it for cheap. Rudy at Rudy's Honda & Acura in Gainesville has a good connection on CNC'ing too, i'm designing a/c and power steering brackets on AutoCAD to get done eventually...
which autocad are u using ?
speedminded
09-08-2005, 12:42 PM
Maybe an existing endlink kit could be used, just do the bends accordingly?
which autocad are u using ?2000 at home...and 2000 and 2005 at work. Gotta take the parts off my car to measure so hoping to find some spare ones to play with...
Tracy
09-08-2005, 12:43 PM
Grand Bending 770-426-0734
Jon00
09-08-2005, 02:25 PM
Maybe an existing endlink kit could be used, just do the bends accordingly?
2000 at home...and 2000 and 2005 at work. Gotta take the parts off my car to measure so hoping to find some spare ones to play with...
have u played around with 2006 i like it better then the 2000 havnt did anything on 2005 but the 2006 i like
Xrated O.G.
09-08-2005, 02:33 PM
who has a mandrel pipe bender in atlanta
also who has a cnc machine
You asked for someone with the ability to make mandrel bends, correct? If that is the case then why the hell would I have recommended you to someone who does press bent shit?
You know what, just forget I said their name.
Tracy
09-08-2005, 03:32 PM
You know what, just forget I said their name.
Word! Me, too!
speedminded
09-08-2005, 04:28 PM
have u played around with 2006 i like it better then the 2000 havnt did anything on 2005 but the 2006 i like2005 sucks...it's so freakin slow, it freezes, the layer manager is all screwed up, etc..i refuse to draw in it and only use it to convert drawings. i probably won't ever have '06 had home...'05 is nearly impossible to rip.
*freeee bump*
Jon00
09-08-2005, 04:35 PM
2005 sucks...it's so freakin slow, it freezes, the layer manager is all screwed up, etc..i refuse to draw in it and only use it to convert drawings. i probably won't ever have '06 had home...'05 is nearly impossible to rip.
*freeee bump*
lol thanks for telling me about the 2005
i heard that the 1998 was real god
btw free bump
speedminded
09-08-2005, 04:42 PM
lol thanks for telling me about the 2005
i heard that the 1998 was real god
btw free bumpfor the price 98 or 2000LT is great but i can *cough* give you a full version of 2000.*cough* Lalalala.
Jon00
09-08-2005, 05:00 PM
for the price 98 or 2000LT is great but i can *cough* give you a full version of 2000.*cough* Lalalala.
lol i meat hit u up on that lol
what are drawing on it ?
sorry about hi jacking your thread u just dont see many poelpe using autocad lol
1 SICK GT
09-08-2005, 08:18 PM
lol i meat hit u up on that lol
what are drawing on it ?
sorry about hi jacking your thread u just dont see many poelpe using autocad lol
it's ok i don't really mind but thanks for all of ya'll help anyways, it's kinda hard for me to find places because i just moved here about 4 months ago and i don't really know any shops that are trust worthy because of my lack of experience with them, so i have to use word of mouth
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.