power window conv

[jcs]

so i did a power window conversion on the hatch from a spare ex i had layin around.did the doors the floor harness and everything.so last week my windows stopped working,the mirrors and everything still work.i replaced the fuses and the relay.does anyone know whats wrong?is there another fuse that may run the windows under the dash?? thanks in advance.:goodjob:

[G.C]

i dont know much but check to see if your getting any voltage first.

[jcs]

i dont know much but check to see if your getting any voltage first.

thanks will do.+2

[jcs]

bump

[jcs]

got it fixed

[Tech5]

good deal!

[j0nbunklah0m]

im kinda interested in this. wat all do u need to convert?

[neon_ert3]

<--- interested too

[Theycall_Metue]

im kinda interested in this. wat all do u need to convert?
he jdm converted vtec to his windows

[G.C]

so what was the problem?

[jcs]

im kinda interested in this. wat all do u need to convert?

well i was thinking on doing a write up but not sure yet.basically you need the ex doors,or the panels and all the guts.you replace the old doors with the new there is a whole group of wires that run from the driver side door to the back of the fuse box under the dash.you will also need the floor harness to run power to the other side.put the four fuses in the correct spot and install the power window relay.then bam power doors.:goodjob: if someone tell me where to do a write up id be more than happy

[jcs]

so what was the problem?

stupid fuse for the wipers and p/w and shit.