View Full Version : ZEN Motors - Trend Setting Motors - Daily Grind
carbongs
10-10-2008, 07:26 AM
Just posting up pictures from the shop. I will update as projects come and go. :goodjob:
Had a bit of work to do today at the shop! Just thought I'd share!
1993 Integra LS
New Brake Pads
New Radiator
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-08.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-082.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-084.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-085.jpg
Man the new ones, on the left, are way thicker than the ones on the right, old ones.
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-0810.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-086.jpg
Had to use a high pressure clamp to push back the piston.
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-0810.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-0813.jpg
Buttoned up the brake calipers and wheels.
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-0814.jpg
Started to get the radiator out.
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-0815.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-0816.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-0818.jpg
Drained out the old coolant
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-0819.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-0820.jpg
Radiator out.
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-0824.jpg
New one on the left and the old one on the right. Had to transfer all the fans, housings, and tubes over to the new one.
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-0822.jpg
Close up
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-088.jpg
New hoses
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-087.jpg
All buttoned up
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-0848.jpg
carbongs
10-10-2008, 07:26 AM
2005 Lexus GS300
De-badged the Trunk
New Junction Produce Spoiler
New TTE Front Lip
Before
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-0825.jpg
Used a heat gun and some goo gone with some rubbing compound afterwards to clean it up.
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-0826.jpg
3M Taped up the spoiler pieces with some high strength grade 3M Tape.
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-0827.jpg
Debadged and trunk spoiler installed.
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-0835.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-0829.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-0828.jpg
Test fitted the TTE lip spoiler
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-0831.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-0830.jpg
Everything looked nice so we started to 3M Tape up the inner lips
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-0831.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-0833.jpg
Definitely lots of people at the shop today
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-0839.jpg
Let the tape do its work for a while as we waited for the Integra to finish up on the lift.
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-0846.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-0847.jpg
Drilled and screwed on the lip from the predrilled points and then taped up the lip to make sure that it held up the weight while the tape and caulking glue dries. I contemplated eating the glue at one point! So hungry!
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-0852.jpg
Officer Jermaine didn't understand what the tape was for lol
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-0853.jpg
Glued, taped, and caulked up!
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-0850.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-0851.jpg
All buttoned up and finishing off the glue.
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-0849.jpg
A few pictures that I got at Zaxby's where JonFlip, G35Chaser, and I ate dinner.
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-0859.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-0860.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-9-0861.jpg
d_day87
10-10-2008, 07:38 AM
some very nice work.
Silvrmaxx
10-10-2008, 07:41 AM
^ i would have to agree... cant wait to see what you guys are capable of when it comes to building a car! how much is your hourly rate? jus curious
carbongs
10-10-2008, 07:44 AM
we are more of a dealership. any inquiries should go to GGPIS3. thanks for the kind words though :cheers:
Random Hero
10-10-2008, 09:19 AM
The rear spoiler on that GS looks great.
Nice work indeed.
SouthrnStyle
10-10-2008, 09:24 AM
Very nice work
Jonflip29
10-10-2008, 11:27 AM
Good coverage Tony, I didn't know you were able to take that many pictures with your hands full. LOL. I guess you did it with anger.
carbon_crash
10-10-2008, 11:34 AM
2 post lift FTW
quiet_s0ng
10-10-2008, 11:41 AM
can you guys mod some EP3 seats for me to mount into my EJ8 hatch? i believe all that needs to be done is cut off the EP3 mounts on the slider and weld in new ones to match up to the mount points in my EJ8 hatch. shoot me a price if you can. thanks
WhiteAccord
10-10-2008, 11:41 AM
I gotta stop by... Havent been to the shop in a long time.
GGPIS3
10-10-2008, 03:09 PM
can you guys mod some EP3 seats for me to mount into my EJ8 hatch? i believe all that needs to be done is cut off the EP3 mounts on the slider and weld in new ones to match up to the mount points in my EJ8 hatch. shoot me a price if you can. thanks
going to have to say no. too much liability with that type of project. if anything were to go wrong and that seat wasn't completely secured... well yeah.. gonna have to pass on this one. sorry
GGPIS3
10-10-2008, 03:10 PM
but i am pretty sure turbo dave could fab it up with ease. give him a call at mainstream
Brady
10-10-2008, 03:30 PM
very nice tony!!! So you quit at walmart and work there full time now? Ohh an next week should be a good week for dealers at auction....things have been uber slow the last few weeks.
puregroove
10-10-2008, 05:08 PM
--good work, guys. I want to re-do my sideskirts now. :crazy:
yungdz
10-10-2008, 05:18 PM
nice work guys, as usual nice coverage Tony
carbongs
10-10-2008, 10:35 PM
very nice tony!!! So you quit at walmart and work there full time now? Ohh an next week should be a good week for dealers at auction....things have been uber slow the last few weeks.
Sup Brady!?! been a while huh? Yeah I quit Wal-Mart and went to Elite of Atlanta Auto Sales, then over to ZEN Motors, LLC. I am doing this full time. As a matter of fact I just started my own business - Trend Setting Motors, LLC. So now I am subcontracting work and am my own boss! The dream is coming true man!
--good work, guys. I want to re-do my sideskirts now. :crazy:
Let's Get-r-done!
nice work guys, as usual nice coverage Tony
Thanks man!
Crazy Asian
10-10-2008, 10:38 PM
why couldnt you guys be opened when I was working on my car. N ow my car looks like crap cuz I tried it myself. Now I know where to go.
carbongs
10-10-2008, 11:07 PM
why couldnt you guys be opened when I was working on my car. N ow my car looks like crap cuz I tried it myself. Now I know where to go.
what did you need done?
quiet_s0ng
10-11-2008, 12:24 AM
but i am pretty sure turbo dave could fab it up with ease. give him a call at mainstream
thanks i'll check out ms
manilikecars
10-11-2008, 02:03 AM
look at tony, clean work man, you do it right the first time
Brady
10-11-2008, 07:24 AM
Sup Brady!?! been a while huh? Yeah I quit Wal-Mart and went to Elite of Atlanta Auto Sales, then over to ZEN Motors, LLC. I am doing this full time. As a matter of fact I just started my own business - Trend Setting Motors, LLC. So now I am subcontracting work and am my own boss! The dream is coming true man!
Man thats just awesome as hell. Good for you sir! Car is looking good as ever. I'm hoping to make it out to one of y'alls shows one day in the future. They always look like a killer time.
carbongs
10-11-2008, 08:31 AM
look at tony, clean work man, you do it right the first time
lol thanks man.
Man thats just awesome as hell. Good for you sir! Car is looking good as ever. I'm hoping to make it out to one of y'alls shows one day in the future. They always look like a killer time.
definitely man! there's a meet up at our shop on sunday the 26th! :goodjob:
2turbo4u
10-11-2008, 09:35 AM
Man you always have a camera near by, congrats on your new ventures.
carbongs
10-11-2008, 09:28 PM
thanks alot for the good wishes
carbongs
10-13-2008, 10:44 AM
So picked up a few parts for a client last week. They were bought off of a classifieds ad so the condition was less than perfect. Took the parts over to our powdercoating guys and had them media blast the parts and recoat them with anthracite powder. The parts look brand spanking new and will be installed shortly on a client's white Lexus GS400.
TRD Upper Strut Stabilizer Bar
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC03979.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC03980.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC03983.jpg
Swift Racing Technologies (SRT) Intake Heat Shield
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC03984.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC03985.jpg
Swift Racing Technologies (SRT) Intake Piping with Mass Air Flow Sensor Adapter
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC03986.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC03987.jpg
Jonflip29
10-13-2008, 03:16 PM
Sick powder coating. I've seen it in person. I need to give you some stuff to send off for me Tony. Powder coating FTW.
carbongs
10-13-2008, 03:18 PM
Sick powder coating. I've seen it in person. I need to give you some stuff to send off for me Tony. Powder coating FTW.
let's do it man! :goodjob:
carbongs
10-13-2008, 05:11 PM
Took out the seats and door panels in the IS300 today for new leather seat covers to be installed.
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-13-08ShopPics2.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-13-08ShopPics6.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-13-08ShopPics9.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-13-08ShopPics12.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-13-08ShopPics18.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-13-08ShopPics21.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-13-08ShopPics24.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-13-08ShopPics27.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-13-08ShopPics3.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-13-08ShopPics7.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-13-08ShopPics10.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-13-08ShopPics13.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-13-08ShopPics19.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-13-08ShopPics22.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-13-08ShopPics25.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-13-08ShopPics4.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/10-13-08ShopPics28.jpg
carbongs
10-14-2008, 04:49 PM
Worked on a client's 1998 Lexus GS400 today
Swift Racing Technologies Intake
Swift Racing Technologies Heat Shield
Swift Racing Technologies HFI Race ECU
Toyota Racing Development Upper Strut Bar
HKS Axle Back Exhaust
DB Link Power Line Run to the Amplifier
Pulled the car in and aligned it up for the lift.
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04030.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04031.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04032.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04033.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04034.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04035.jpg
Dirty and stock engine bay
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04036.jpg
Taking off the engine cover and intake plumbing
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04038.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04039.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04042.jpg
Covers and pipes off
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04043.jpg
freshly powdercoated SRT intake pipe
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04044.jpg
Had to transfer the stock mass air flow sensor over to the new pipe.
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04046.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04048.jpg
Heat shield and Mass Air Flow Sensor adapted pipe installed
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04050.jpg
Vacuum lines installed
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04052.jpg
Installed the TRD strut bar and engine cover back on
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04057.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04055.jpg
Had to take off the stock bolts for the exhaust pipes at the rear axle
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04058.jpg
Very stubborn bolts. Car was from the north so there was a lot of rust. Had to dremel 1 bolt, 2 of them snapped and one came out smooth.
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04059.jpg
This is the only bolt that came out ok
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04065.jpg
The snapped bolts
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04066.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04067.jpg
The results of dremeling off one of the bolts
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04069.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04071.jpg
The exhuast came off though
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04060.jpg
New ones - HKS - mocked up
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04061.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04062.jpg
Had to run to the hardware store to get new bolts and nuts to put the exhaust on. Got back and finished the install.
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04072.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04073.jpg
New zinc coated bolts to keep the rust to a minimum
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04074.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04075.jpg
Started to work on the ECU for the SRT intake which wires directly into the OEM ECU to change the air/fuel ratios.
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04076.jpg
Soldered all the connections and shrink wrapped them.
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04077.jpg
All buttoned up and neatly packed inside the ECU box.
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04078.jpg
Here is what the car sounded like before intake and exhaust with the ECU upgrade.
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/th_MOV04037.jpg (http://s49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/?action=view¤t=MOV04037.flv)
Here is what the car sounded like after the intake and exhaust with ECU upgrade was installed.
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/th_MOV04103.jpg (http://s49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/?action=view¤t=MOV04103.flv)
Started to tackle the Subwoofer. The client already had everything hooked up however the battery line was way too small for such a poerfrul amp at 950 watts. So, he asked me to run a new 0 gauge power line with a fuse from the battery to the trunk.
This was what it looked like before I touched anything. Pretty nasty and ugly if you ask me.
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04081.jpg
The battery wire is the tiny red one
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04084.jpg
I used the existing battery wire to run the new 0 gauge wire through the passenger side firewall.
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04085.jpg
Took apart the kick panel to access the wire and tucked it through the side wells.
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04086.jpg
Had to take out the rear seats to access the trunk holes
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04087.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04088.jpg
Ran the wire through the rear deck firewall
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04089.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04090.jpg
Then I decided to redo the ground wire while I was at it. The existing one was very small and grounded at a very inconvenient place. The new grounding spot.
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04091.jpg
Mounted the amp on the back of the box and installed the lines.
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04094.jpg
Nice and hidden now. Don't worry, I will be doing a custom beauty wall for the trunk to move the sup enclosure back and give him back his trunk space.
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04093.jpg
Mounted the battery line fuse in the engine bay.
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04097.jpg
The engine bay pre cleaning.
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04092.jpg
Changed out the amber side markers to clear side markers.
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04099.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04100.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04101.jpg
http://i49.photobucket.com/albums/f279/CarbonGS/Shop%20Pics/DSC04102.jpg
Cleaned up the engine bay and trunk and the customer just took delivery! Thanks for coming along today!
EP3sAreFun
10-14-2008, 05:13 PM
Damn Nguyen, smile for the camera man!
Brady
10-14-2008, 06:17 PM
Damn tony good stuff! Does your powder coater do ceramic coating as well? I just got a new block for my new project and need some stuff done!
carbongs
10-14-2008, 07:40 PM
Damn tony good stuff! Does your powder coater do ceramic coating as well? I just got a new block for my new project and need some stuff done!
sure thing! let me know bro!
drpepper14
10-14-2008, 10:59 PM
what brand 0 gauge is that? It looks more like 4 gauge
carbongs
10-14-2008, 11:52 PM
DB link, it is what the client brought to me. It is 0 gauge.
WhiteAccord
10-14-2008, 11:58 PM
Damn nice... I need to stop by and say hi once in a while.
carbongs
10-15-2008, 11:36 AM
Damn nice... I need to stop by and say hi once in a while.
sure thing man, just call first to make sure we are here. not always at the shop.
WhiteAccord
10-15-2008, 02:06 PM
PM me your number and Dans number I got a new phone.. but no numbers.
carbongs
10-16-2008, 12:13 AM
pmed
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.