View Full Version : ITR & GSR head gasket any difference?
VickNotic
10-09-2008, 05:33 PM
i'm using a ITR block, GSR head.. and using a GSR headgasket... should be the same shIIt right?? or will i need to get a ITR head gasket..
oem pistons, standard size pistons no oversize pistons blah blah,, just oem..
GSR headgasket should be the same as ITR headgasket right?
inutero93
10-09-2008, 06:16 PM
its the same
Barefoot
10-09-2008, 06:28 PM
all b series vtec same
VickNotic
10-09-2008, 07:17 PM
all b series vtec same
except b16 though RIGHT!
1SOL2NV
10-09-2008, 08:26 PM
type r head = Upgraded b16 head .
VickNotic
10-09-2008, 09:15 PM
but it will be a b16 head gasket if it was to use a b16 block & b16 head right?
DC2NR
10-09-2008, 09:23 PM
but it will be a b16 head gasket if it was to use a b16 block & b16 head right?
I think it'll still be the same as all the B-series vtec blocks have pretty much the same bore size, etc etc. Only difference is the stroke and height and a few other things. You get the point.
mitch lab
10-10-2008, 06:15 AM
it's the same
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.