PDA

View Full Version : built d16/z6 head/itb's/CrAcKhEaD pRiCe



B_Hoov
10-01-2008, 06:17 PM
looking to sell these items as a whole set, this is a steal for an easy 300whp set-up, everything in motor is fresh and new, accepting trades for any kind of toys, cars, guns etc...
JE 9:5:1 pistons
JE rings & wrist pins
Eagle H Beam rods
ACL race and journal bearings
ARP 2000 rod bolts
ARP head studs
Golden Eagle block guard (i think)
polished and balanced stock crank
before someone asks AGAIN...pistons have FACTORY OPTIONAL ceramic coating on them from JE, and i did paint the block aged copper. again i DID NOT PAINT THE PISTONS!!!
honda 954RR itb setup (plug n play) no pics will be done next week-ish
stock Z6 head in great condition
1200 for ALL ITEMS LISTED ABOVE :eek:
will throw in BRAND NEW direct port pro race fogger kit by NOS for 400 more! :crazy:
reps for bumping, quickest way to contact 678-828-1587
will take partial trades+cash
can throw out cash towards trades as well depending on vehicle

PURP
10-01-2008, 06:50 PM
bump for Bruce

mr.koupe
10-01-2008, 06:53 PM
very nice setup

Revmaynard
10-01-2008, 06:55 PM
Good luck, Bruce!

B_Hoov
10-01-2008, 08:41 PM
all parties RePpEd...all pm's replied to

B_Hoov
10-01-2008, 10:32 PM
tippy topz

boosted91rex
10-01-2008, 11:07 PM
very nice setup

x2 g/l with sale

roche
10-01-2008, 11:18 PM
If you posted this a month from now I would totally get it. but alas.

B_Hoov
10-02-2008, 12:16 AM
If you posted this a month from now I would totally get it. but alas.

hopefully i won't but if i do...good for you.

B_Hoov
10-02-2008, 01:58 PM
top

southside
10-02-2008, 06:12 PM
Nice stuff GLWS

B_Hoov
10-02-2008, 10:11 PM
repped

boostedb16
10-02-2008, 10:16 PM
is it all put together and ready to go? with out any boost or n20, what would be the hp?

B_Hoov
10-02-2008, 11:32 PM
is it all put together and ready to go? with out any boost or n20, what would be the hp?

it's all together as far as rods, pistons, crank,etc.you will need a donor motor for things like oil pan etc...i would buy a new OEM oil and water pump for it along with timing belt and tensioner and get everything else from a donor motor. with the comp only at 9:5:1 you could run n/a but don't expect over 160whp with the itb's and stock z6 head, higher comp will yield more hp, higher comp is actually recommended for N20 but with this comp ratio you have a safety barrier (as fool-proof as N20 is...its not perfect, solenoids fail, so do switches and throttle plates) and your not stressing the motors internal parts as much with this comp ratio. hope i answered your question...for asking price i will find and buy a donor motor and throw in.

SRCRX
10-03-2008, 11:18 AM
Bump

glws

B_Hoov
10-03-2008, 12:51 PM
repped

boostedb16
10-03-2008, 11:13 PM
i have a d16z6 in mine now. so with this set up, i would be looking at around 160hp n/a.

B_Hoov
10-04-2008, 12:32 AM
i have a d16z6 in mine now. so with this set up, i would be looking at around 160hp n/a.
correct w/out spray or boost which is essentially what this motor was built to handle on a daily basis...

amandDA
10-04-2008, 07:20 PM
bump... g/l w/ sale

B_Hoov
10-04-2008, 08:15 PM
repped

VickNotic
10-06-2008, 10:00 AM
food stuff..

tdurr
10-09-2008, 06:56 PM
I dont suppose you have an obd0 multi point wiring harness for that?

call me if you do 678 850 6639 Jordan, and i got cash

-S Double C-
10-09-2008, 08:59 PM
my buddy wants to know if you will sell just the block? if so pm me a price...oh BTW that block is good for 400-550whp if it was built right :goodjob:

fatman169
10-09-2008, 10:12 PM
damn to bad i put a gsr in mine nice set up...

B_Hoov
10-10-2008, 06:55 PM
all partied repped, i have no harness for it, i have the Z6 harness thats the original harness for this head.

d_day87
10-10-2008, 07:34 PM
some killer parts, goodluck with the sale homie

B_Hoov
10-10-2008, 08:22 PM
you need to call me next time ur in town, throwin a lil something together i think you'll enjoy...lil over 100whp...most fun i have EVER had...scary fast too...

jporta18
10-11-2008, 12:14 AM
pm'ed:goodjob::goodjob::goodjob:

B_Hoov
10-11-2008, 09:52 PM
^pm replied, NOS kit has been sold, ITB's will have a separate thread with pics and specs when i finish them this week.

B_Hoov
10-12-2008, 12:05 PM
top

Tech5
10-12-2008, 12:07 PM
dAYUMMMM

Those toes!!!!!!!!!!!!!!!

B_Hoov
10-13-2008, 03:42 PM
^you killin me with the toes man...reps

JDMaccord
10-13-2008, 05:59 PM
hey man told my friend bout this set up and the car / ill call u later c if we can stop by check it all out??? around 830 ish??

B_Hoov
10-13-2008, 10:14 PM
repped^ look forward to it man

FrankTMFTank
10-13-2008, 10:25 PM
nice parts man, GLWS

B_Hoov
10-14-2008, 10:45 AM
repped ^ got someone coming to look tonight!

brandenj
10-14-2008, 11:56 PM
dang wish i had the cash i wouldnt mind trowing on my jrsc set-up on that thing along with a 55shot i just bought...glwts

B_Hoov
10-15-2008, 08:46 AM
repped ^ if i have it another week or two im keeping it, throwin on a turbo kit and callin it a day, be passin out some SOHC whoopass

brandenj
10-15-2008, 03:37 PM
^might as well just put it in, turbo it and call it a day imo

B_Hoov
10-15-2008, 10:28 PM
no longer for sale, however catch me on the right day before i get too far into putting this beast together...and we might work something out

MrTurboCivic
10-17-2008, 01:19 PM
bump glws

B_Hoov
10-17-2008, 05:48 PM
repped

SDBCIVIC
10-18-2008, 09:28 AM
nice stuff man, just seen it today so good luck gettin it going. i have stock donor stuff for you if you need anything.also have a timer and rc 550cc if you need them. if i would have seen it earlier i would have sold my ls swap and got your setup.