ECU PINS!

[SlamminCRX]

can someone pleaseee explain to me how to remove the wires from the ecu plugs...i know this been covered a lot of times but i cant find a good write up anywhere.

[rbf]

Try Honda-tech it is all over that site.

[G.C]

its easy. i did it before. you first have to open the back side by pushing it with a flat head from the middle and push it upward. it will swing open. Then from there you can pull it out easily.

[G.C]

The pins wont come out if you dont get the thing to swing open first. I tried it and it did not come out. after 30 min of messing with it i finally got how it works and from there it was easy to pull them out. Just keep on messing with them untill it flips open.

[SlamminCRX]

man i just ended up cutting the wires. it works good so far.

[rbf]

man i just ended up cutting the wires. it works good so far.
(not trying to be a jacka**) but why would you cut wires that can easily just be de-pinned?.Just make sure to solder them and not twist them together in electrical tape.
:cheers:

[southside]

(not trying to be a jacka**) but why would you cut wires that can easily just be de-pinned?.Just make sure to solder them and not twist them together in electrical tape.
:cheers:I love soldering:goodjob:

[SlamminCRX]

trust me, i didnt twiste them and taped them together.

[eva6206213]

thank you for your sharing~