PDA

View Full Version : 1JZ Aem Ems


1JZ240sx
09-25-2008, 03:05 AM
I was wondering if anyone knows of a conversion harness to use the 2JZ Aem Ems with 1JZ motor. If not does anyone know how to wire it up to work I know it can be done just don't know how. Thanks
David88vert
09-25-2008, 06:14 AM
AEM makes a universal that will work with pretty much any motor. Not sure if they have a conversion harness. Check on the forum at aempower.com
1JZ240sx
09-25-2008, 02:37 PM
I appreciate it and I looked there but there was nothing. I know you can use the universal on any car but was wondering on the wiring more.
Dr Tweak
09-26-2008, 04:02 PM
You mean like this?

http://www.phoenixtuning.com/jumpers/1jzSuprato2JZ.jpg

Yeah, I have them. [email protected]

-Doc
NevrNufTorq
09-26-2008, 04:12 PM
You mean like this?

http://www.phoenixtuning.com/jumpers/1jzSuprato2JZ.jpg

Yeah, I have them. [email protected]

-Doc
very nice looking harness!! you got a website? :D
1JZ240sx
09-26-2008, 04:14 PM
Yes exactly like that, is that harness for six single injectors or three batches.
Tracy
09-26-2008, 04:16 PM
Dan at Batlground can hook it up. www.batlground.com [email protected]
Dr Tweak
09-26-2008, 04:27 PM
very nice looking harness!! you got a website? :D

http://www.phoenixtuning.com/


Yes exactly like that, is that harness for six single injectors or three batches.

That one in the pic is set up for sequential, I can also set it up for batch which is a pretty simple change to make in the AEM and makes installation a good bit easier (since you don't have to rewire the six injector signal wires).

-Doc
NevrNufTorq
09-26-2008, 08:35 PM
http://www.phoenixtuning.com/



That one in the pic is set up for sequential, I can also set it up for batch which is a pretty simple change to make in the AEM and makes installation a good bit easier (since you don't have to rewire the six injector signal wires).

-Doc
ty sir for the link :D
EmminoDaGreat
09-26-2008, 08:49 PM
We can wire it, We actually just finished one :D 678-567-9384
NevrNufTorq
09-26-2008, 11:31 PM
We can wire it, We actually just finished one :D 678-567-9384
made beautiful dd powa too!!! but that plug n play wiring conversion is very nice depending on how much it costs!! :blah: :cheers:
EmminoDaGreat
09-27-2008, 06:51 PM
true!
mike's02ls1
12-02-2008, 07:26 PM
Cool can you guys do a wiring harness conversion for 1JZ/5psd into a 92 Volvo 940?
NevrNufTorq
12-02-2008, 07:59 PM
Cool can you guys do a wiring harness conversion for 1JZ/5psd into a 92 Volvo 940?
sent you a pm :goodjob:
mike's02ls1
12-02-2008, 08:27 PM
sent you a pm :goodjob:
Sent one back