PDA

View Full Version : ls swap question



hondaxpurt
09-17-2008, 09:57 PM
yes i am swapping an ls into a ej1 coupe and i need to know what shift linkage i need to use for it? its going to be a ls tranny and i have the stock d series linkage now

Homer Simpson
09-17-2008, 10:10 PM
you'll need the ls shift linkage

hondaxpurt
09-17-2008, 10:34 PM
will any b series tranny

EmminoDaGreat
09-17-2008, 10:35 PM
a DC shift linkage will work...

hondaxpurt
09-17-2008, 10:38 PM
an ls dc linkage will bolt right up?

hondaxpurt
09-17-2008, 10:40 PM
also what if i decided to go with gsr or b16 tranny?

RBS
09-17-2008, 10:49 PM
you need any 94-01 integra shift linkage, doesnt matter what model as long as its from a 94-01 integra

hondaxpurt
09-17-2008, 10:50 PM
thanks guys

hondaxpurt
09-17-2008, 10:55 PM
ok what about axles? what axles do i need? any b series axles?

VickNotic
09-17-2008, 11:17 PM
bseries my friend, and also the half shaft also, b series motor mounts, especially rear motor mount. :)

Barefoot
09-17-2008, 11:23 PM
ok what about axles? what axles do i need? any b series axles?either DA or DC just make sure u get the proper half shaft to match.

hondaxpurt
09-18-2008, 05:29 AM
can i use b16 axles? i work at honda so i get a good deal on parts

Barefoot
09-18-2008, 05:30 AM
can i use b16 axles? i work at honda so i get a good deal on partsyes

hondaxpurt
09-18-2008, 05:31 AM
sweet so i can just get axles for a 99 si and will work in an ls tranny?

EmminoDaGreat
09-18-2008, 06:21 AM
Yes, or an integra axle..

hondaxpurt
09-18-2008, 06:37 AM
well i cant get good deals on acura parts only honda parts :cry:

j0nbunklah0m
09-18-2008, 07:10 AM
:thinking: so just use the si ones then

RBS
09-18-2008, 07:22 AM
well i cant get good deals on acura parts only honda parts :cry:

if a acura or honda came with a B series motor... you can use the axle from it, minus the type r. simple :goodjob:

Barefoot
09-18-2008, 10:34 AM
if a acura or honda came with a B series motor... you can use the axle from it, minus the type r. simple :goodjob: and crv

Tech5
09-18-2008, 10:37 AM
The rear bracket yes not the mount!!! the mount on your stock d series works fine!!!! also you can use 99-00 B16 Si shift linkage also!!!
bseries my friend, and also the half shaft also, b series motor mounts, especially rear motor mount. :)

Tech5
09-18-2008, 10:38 AM
depends, there are some that didnt have the intermedit half shaft which is needed, so make sure you get that, bolts to the back of the motor, and into the tranny then axle slips over the interm.half shaft
if a acura or honda came with a B series motor... you can use the axle from it, minus the type r. simple :goodjob:

1SOL2NV
09-18-2008, 10:39 AM
since u can get "HONDA" parts use the 1995 Del Sol Vtec model Axles ..or the 99 civic SI axels ... use the 94-01 integra shift linkage . i have the halfshaft if you need it .. will fit the B16 and ls axles .

integar94
09-18-2008, 03:31 PM
u got all the parts for it already? I have a ls hatch that still in my car...runs perfect but im plannin to sell everything except the tranny.