PDA

View Full Version : Cam, RPM Air Gap intake, 770CFM Holley SBC Parts!



03RCode
09-16-2008, 10:21 PM
I have a few SBC parts I ended up with on a trade, was going to build a 350 for a buddies S10, but he never came up with the money so the parts are going for sale...

I have:

1- .588/.585 lift Comp Cam (unsure of duration or other specs), Great ground pounder, not for the faint of heart... used for 3-4 months, great shape, no abnormal wear... $140

1- Edelbrock RPM Air Gap Intake, used 3-4 months, great shape, just needs to be cleaned... $160

1- Holley 770 CFM Street Avenger, used 3-4 months, great shape, maybe use a good cleaning... $140

2- Chrome SBC Valve Covers, good shape, look great... $40

1- SBC Distributor, Great shape... $40

2- 305HO heads, seem to be in good shape, not gunked up, will include valves, springs, and rockers... $65 (Have 2 sets at this price)

1- Stock 305HO Cam, seems to be in good shape... $40

2- SBC oil pans... Good shape, could use a little cleaning... $20 Have 2 at this price

1- 305HO Shortblock, unsure of condition of bearings, cylinder walls looks great, seems to turn over good... $100 Pickup only on this.



OR Come get it ALL for $600.

Here are the heads/vc's/intake/carb all on the old setup.
http://img.photobucket.com/albums/v424/EX075/91705003.jpg?t=1221622052
http://img.photobucket.com/albums/v424/EX075/8-28-05018.jpg

yogi08
09-16-2008, 10:23 PM
can you find me a 205 transfer case?
no tranny, just transsfer case
thank you man, hope ya can.. ive had no luck :(

bump, buy this mans stuff!

03RCode
09-16-2008, 10:29 PM
can you find me a 205 transfer case?
no tranny, just transsfer case
thank you man, hope ya can.. ive had no luck :(

bump, buy this mans stuff!

How much you looking to spend? I have an extra GM T/C in the shop, I dont think its a 205 though. I'll see what I can do.

yogi08
09-17-2008, 02:07 AM
bump for you man, you found exactly what i need :)

03RCode
09-17-2008, 12:50 PM
Will also consider trades for LT1 parts... ie: GM847 Cam, 1.6RR's, L/T Header's, etc.

03RCode
09-18-2008, 12:43 PM
TTT

03RCode
09-19-2008, 07:37 AM
Bump... Don't be afraid to shoot offers people.

03RCode
09-21-2008, 02:51 PM
Up.

Slomaro Z28
09-21-2008, 09:36 PM
Hum.....if they were LT1 parts then I'd jump on 'em. But GL, BTW I ended up pulling the intake and heads for that bolt, and some extra stuff :ninja:

03RCode
09-21-2008, 09:39 PM
Awesome, you'll enjoy it I'm sure. I'm fixing to go to yet another setup (More port work, bigger cam, etc). Should be quick when I'm done.


NEW PRICE $550!!!!! OR shoot an offer on the individual parts.

03RCode
09-23-2008, 03:32 PM
Get these out of my shop, $500. Thats the lowest I'm going.

03RCode
09-25-2008, 04:08 PM
Updated with individual prices in the first post, all prices are OBO.

jew_boy
09-25-2008, 04:19 PM
damn only if i wasnt leaving this weekend i might would have got some of this, bump for some good stuff GLWS

03RCode
09-29-2008, 04:31 PM
At this point seriously willing to hook someone up on these parts. I need cash in a bad way. Send me some offers, ANY offers.

91eflx
09-30-2008, 10:43 PM
bump for good friend

03RCode
10-05-2008, 04:15 PM
Would also trade for a PS3.

03RCode
10-07-2008, 09:51 PM
$350 FIRM come get ALL of it. I NEED money in a bad way.

03RCode
10-13-2008, 02:03 PM
TTT, surely someone wants to build a quick SBC.

knightluder
10-13-2008, 08:00 PM
Are all these parts already installed on the motor?
If I were to get it, I am planning on putting it in an S-10. , Do you know what else I would need for it?

03RCode
10-13-2008, 11:41 PM
The cam is installed, as is one set of heads. The intake and carb are sitting on the motor, but not installed. You'd need a gasket set, as well as I'd put an oil pump on it. Also as stated, I'm not 100% sure the condition of the bottom end, bearings look good, with no abnormal wear but I'm not able to guarentee it. Was told the car it was pulled from ran fine, so I was going to use it as is.

03RCode
10-15-2008, 12:30 PM
TTT

03RCode
10-15-2008, 11:02 PM
$300 this week only.

03RCode
10-19-2008, 02:50 PM
TTT...

davidr83cj7
11-28-2008, 10:48 PM
can you find me a 205 transfer case?
no tranny, just transsfer case
thank you man, hope ya can.. ive had no luck :(

bump, buy this mans stuff! i have one give me a call 478-952-0120 im in warner robins..

03RCode
12-15-2008, 11:25 AM
TTT Needing cash in a bad way guys, shoot me any offer.

03RCode
01-08-2009, 06:11 PM
Will trade this all for a good 870cfm carb, or a 6" cowl hood for an 88 Mustang.

03RCode
02-20-2009, 05:45 PM
Sold.

Bigt8aford
02-23-2009, 10:53 AM
do you know if any of this would happen to fit a 5.0 305 in a 1992 caprice?