PDA

View Full Version : Built EJ6 $4,000



JDMJorgie
09-04-2008, 05:55 PM
97 Honda Civic Dx







Interior

red carpet

rockford fosgate crossovers

Mugen pedals

carbon fiber E-brake

B&M short throw shifter

Autometer Tach
Exterior

16 inch ICW rims

Brembo cross drilled & slotted brakes

Axxis Carbon Kevlar brake pads

Coilover suspension

Full Header Back 2.25 in Exhaust w/ Cherry Bomb

Spoon style mirrors

Engine

Built LS/VTEC motor (B18a1/B18c1)

DC headers

Blox intake manifold

Hondata intake manifold gasket heat shield

B16 throttle body

Short ram intake

H22a1 injectors

Crower stage 2 "402" cams

Supertech valve springs

Supertech valve spring retainers

Ferrea valves

B16a pistons and rods running 11-5-1 compression

Tranny

B18c1 tranny

Comp stage 4 six puck clutch

Lightened flywheel

Royal Purple Tranny fluid

The car also comes with a P72 ECU that's been tuned by Mainstream Performance. It has had roughly five hours worth of tuning and dyno time . There is very little else that can be tuned. The car itself runs great, when VTEC kicks in it sounds totally differant and the front of the car literally lifts up when it kicks in at around 5500 rpm. When dynoed it put down 189 HP with 158 LBS of torque. With a little bit more parts it can easily hit over 200 HP.

The main problem with the car is of course the motor mounts. It'll jump around when you try to move forward and reverse but it's an easy fix. The car broke down on me about two months ago and found out it was a distributor cap and rotor button. I fixed it but I advise you get a new one. Besides that, the only problems are that it needs a couple of tires. I just can't put any more money into it. Also the valve cover needs to be RTV'ed again I missed the front left corner and it leaks a little bit of oil. With a little bit more money put into it, it can be a great contender and daily driver.

Let me know if you need any parts I can get you anything you need.

Jorge Ramirez

(706) 428-9129 or

(706) 218-2696 Cellphone

FDslider
09-04-2008, 06:04 PM
why 2 threads?

JDMJorgie
09-04-2008, 07:22 PM
I accidently clicked on submit thread instead of preview and I made two. But they both have differant pics cuz I couldn't make up my mind on which ones to use.