Solid Torque mounts

[Benefit]

well, i have been playing with the idea of making solid torque mounts for people who want them...

i have CNC and all sorts of machines in my basement , i have talked to my dad about it and he said it is quite easy to make...

my brother also makes rtab bushing remover of some sort for bmw's,

here is what i am talking about

http://cgi.ebay.com/ebaymotors/Avid-Mounts-92-00-Civic-94-01-Integra-Torque-Mounts_W0QQcmdZViewItemQQ_trksidZp3286Q2em20Q2el11 16QQitemZ360067071240

if i were to make these, would people be interested?? is this a good idea?

[B18c1Turboed]

I have them,they are very nice set up.But if it aint a drag car ,it will vibrate the **** of the car!!!

[Benefit]

would people buy them if i were to make them?

[G.C]

make one and post pics of it. try it on your car and let us know how it goes. then i will buy one :)

[Benefit]

they will be in pairs....driver and passenger side

[BTEC]

im interested. how much?

[Benefit]

im thinking....they are going for 115-125$ shipped on ebay, and around the same price on most websites...

so i would be selling them around 75$?

i am going to make 2 tonight, take pictures and bolt them up to my ITR,

i have one broken driver side torque mount , and i can hear it pop and just feel the engine movement because of that one mount...

[BTEC]

im thinking....they are going for 115-125$ shipped on ebay, and around the same price on most websites...

so i would be selling them around 75$?

i am going to make 2 tonight, take pictures and bolt them up to my ITR,

i have one broken driver side torque mount , and i can hear it pop and just feel the engine movement because of that one mount...
aight. keep me/us posted bc that aint bad if they hold up. take good pics too.

[Benefit]

will do! father taking the dimensions of the stock one right now...

[B18c1Turboed]

Give me 2 ill test them out for you, Ill put them on my daily driver, its 550HP...

[Benefit]

lol let me borrow your set to get a better idea of how they should be made

[jew_boy]

if you make some of these i might buy them if they are good and strong

http://cgi.ebay.com/ebaymotors/LS1-V8-S-10-S10-S-15-S15-Conversion-Motor-Mounts_W0QQcmdZViewItemQQ_trkparmsZ72Q3a552Q7c39Q3 a1Q7c66Q3a2Q7c65Q3a12Q7c240Q3a1318QQ_trksidZp3286Q 2ec0Q2em14QQhashZitem330264589940QQitemZ3302645899 40#ebayphotohosting

[BTEC]

lol let me borrow your set to get a better idea of how they should be made
lol!!

[Benefit]

bump

[Vteckidd]

if you run AFTERMARKET mounts the Torque Mounts are not needed, especially on a daily driver. Matter of fact its just like the EF and DAs, the aftermarket mounts are so stiff they eliminate the TQ mounts and the front mounts completely.

Now for a road race application, drag race, etc, they work quite well but it sacrifices comfort.

Its definetly a good idea if you can make them for around $75 , but you need CNC Billet aluminum and polyurethane rubber thats perfectly shaped. Its not as easy as it looks but good luck

[turbob20]

really the rear mount takes the most abuse. the others help mostly keep the combination stationary. then the lower ones are torque limiters which wont be needed if all main mounts r solid. but man do those solids really make a car vibrate,lol.

[B18c1Turboed]

What you want? these?
http://i64.photobucket.com/albums/h174/B18c1turboedEK/newpics082008127.jpg

[Vteckidd]

No he wants the mounts that Avid Racing makes, they are the TQ Mounts Danny, the ones that bolt to the fram rail under the car.

One is attatched to the Tranny and one is part of the AC Bracket

[B18c1Turboed]

No he wants the mounts that Avid Racing makes, they are the TQ Mounts Danny, the ones that bolt to the fram rail under the car.

One is attatched to the Tranny and one is part of the AC Bracket

Gotcha!!! Ill take a pic of those when i get home tonight!!!

[BTEC]

where r the pics?