Log in

View Full Version : DC2 Type-R Gauge Cluster HELP


Skillet
08-25-2008, 02:29 PM
I installed a JDM type-r gauge cluster in my 95 integra, everything went smoothly but when I turn the car on the ABS light stays on...does anyone know whats wrong? I can't figure it out.
Benefit
08-25-2008, 02:32 PM
does your integra have ABS?
IntegraXTR
08-25-2008, 02:36 PM
I installed a JDM type-r gauge cluster in my 95 integra, everything went smoothly but when I turn the car on the ABS light stays on...does anyone know whats wrong? I can't figure it out.

There are 2 things you can do....

1) buy a '96 spec ITR gauge cluster and it will be plug and play for 94-97 integras. The one you have is for 98+ tegs.

2) switch the green film on the back of the ITR gauge cluster with your stock 94-97 cluster and everything will work fine.

I've been in your situation before, had to find out the hard way.
Skillet
08-25-2008, 02:47 PM
There are 2 things you can do....

1) buy a '96 spec ITR gauge cluster and it will be plug and play for 94-97 integras. The one you have is for 98+ tegs.

2) switch the green film on the back of the ITR gauge cluster with your stock 94-97 cluster and everything will work fine.

I've been in your situation before, had to find out the hard way.

I have already switched over the green film, which is why i'm so stumped over this damn ABS light. :thinking:

but i'll look into what year cluster i have....thanks
Skillet
08-25-2008, 02:49 PM
does your integra have ABS?

yes
LightningSpeed
08-25-2008, 10:38 PM
wat i did is i swap the jdm gauges out and put it in the 94-97 cluster housing with the bezel, i didnt have to swap the green film and it worked for me
SPOOLIN
08-25-2008, 10:54 PM
removing the bulb is the easiest way. who cares about an ABS light? I always took out the SRS light bulb when putting in aftermarket wheels and removing passenger air bags. So much easier.
LightningSpeed
08-25-2008, 11:01 PM
^^ yeah spoolin is right too... u dont really need the srs and abs light just take the bulbs out
Da_unknown
08-25-2008, 11:07 PM
removing the bulb is the easiest way. who cares about an ABS light? I always took out the SRS light bulb when putting in aftermarket wheels and removing passenger air bags. So much easier.:werd: