PDA

View Full Version : cluster light dont work



integar94
08-19-2008, 11:07 PM
Ok check this out, i had a cx cluster on my hatch and only the e-brake, trunk light, cel, battery light work. Everything esle is darkness. Cant see nething when driving at night. Than i replace it with a ex cluster and same thing still happen. Than a new problem occur. The temp gauge is reading maximum hot and i didnt ever start the car yet. My intrumental light fuse is not blown btw. Any1 had this similar problem

Barefoot
08-20-2008, 12:33 AM
grounds

1SOL2NV
08-20-2008, 12:48 AM
^ amen ... theres a short somewhere behind the cluster or maybe in the radio din /.

integar94
08-20-2008, 09:44 AM
alrite thanks rep but can u explain why the temp is reading like that, do i gotta play around with that needle

1SOL2NV
08-20-2008, 11:29 AM
a loose ground or a faulty power wire touching a ground will make the needle read hot ./ does the car do it with the key out of the car and it not turned on ? if it doesn't then its more then likely a ground .

Tech5
08-20-2008, 12:16 PM
good luck sounds like bad wiring somewhere

suprapower
08-20-2008, 01:32 PM
good luck with it

Tech5
08-20-2008, 01:33 PM
thats what I said!:2up:
good luck with it

integar94
08-20-2008, 07:59 PM
thanks alot sol for the help...imma look more into it tomor

turbob20
08-21-2008, 03:22 AM
like they said a ground and also possibly as far as no lights in bezzle it could need a replacment dimmer switch on the left of you stirring wheel on dash. just pop out and plug in new one.

integar94
08-21-2008, 09:46 PM
o snap when i pop the dimmer switch out, two wire with no insulator are rubbing on each other, guess i found my problem thanks ia

1SOL2NV
08-21-2008, 11:08 PM
yaa... reps to no mo honda's ....

turbob20
08-25-2008, 11:29 PM
no mo hondas and me perhaps,lol give credit where credits due. it took us both to git it done but hey its all good on IA,LOL.