Crowml
08-19-2008, 02:18 PM
This full fiberglass sytem was designed to fit a 1993 Probe Gt Hatch. (any other compatability I'm not 100% sure of) But can be made to fit.
Setup was built for my show car but I traded the car in before the product was fully finished. So all hardware remains in mint condition!
http://i14.photobucket.com/albums/a324/crowml/Probe%20Eunos-ZE/DSCF0025.jpg
The system is a 4 piece system. 2 Enclosures that fit behind the rear tire humps in the hatch, a center amp rack and what was to become a nitrous bottle mount with a Diamond plate top. (Nitrous bottle would be relayed). Fiberglass enclosures were designed to Xtant Specs and will optimize sound quality and pressue levels. Furthermore, the Xtant hexagon trademark design was followed throughout the systems build.
It features:
TWO (2) XTANT 1044
Description 10" (hits better than most 12"s)
Impedance Dual 4 Ohm
Power Handling (RMS) 500 Watts per Voice coil (underated!!!!)
Frequency Response 30-150 Hz
Sensitivity 84.3dB
Magnet Weight 102 oz. (heavy!!!)
Mounting depth 6.25"
Mounting diameter 9.125"
Overall Diameter 12.25"
Diameter - Flat Side 10.75"
Voice Coil Diameter 2.5"
Weight 19 lbs
http://www.mitekfactoryoutlet.com/imgsrvr/largePictureX12.jpeg
Full enclosure is finished in silver. Excuse the pictures as they do the design no justice.
Price is $450.00
Or think of it as, buy the audio from me at below retail and get 65hrs of Fiberglass labor for free.
If interested please email me at [email protected]
Humoring trades for laptops, ( Mac minis, macbooks, powerbooks especially)
Also would like a Wii/Xbox360/PS3 or a high end paintball gun. (i.e. Ego, Dm6+, Marq, etc...
Setup was built for my show car but I traded the car in before the product was fully finished. So all hardware remains in mint condition!
http://i14.photobucket.com/albums/a324/crowml/Probe%20Eunos-ZE/DSCF0025.jpg
The system is a 4 piece system. 2 Enclosures that fit behind the rear tire humps in the hatch, a center amp rack and what was to become a nitrous bottle mount with a Diamond plate top. (Nitrous bottle would be relayed). Fiberglass enclosures were designed to Xtant Specs and will optimize sound quality and pressue levels. Furthermore, the Xtant hexagon trademark design was followed throughout the systems build.
It features:
TWO (2) XTANT 1044
Description 10" (hits better than most 12"s)
Impedance Dual 4 Ohm
Power Handling (RMS) 500 Watts per Voice coil (underated!!!!)
Frequency Response 30-150 Hz
Sensitivity 84.3dB
Magnet Weight 102 oz. (heavy!!!)
Mounting depth 6.25"
Mounting diameter 9.125"
Overall Diameter 12.25"
Diameter - Flat Side 10.75"
Voice Coil Diameter 2.5"
Weight 19 lbs
http://www.mitekfactoryoutlet.com/imgsrvr/largePictureX12.jpeg
Full enclosure is finished in silver. Excuse the pictures as they do the design no justice.
Price is $450.00
Or think of it as, buy the audio from me at below retail and get 65hrs of Fiberglass labor for free.
If interested please email me at [email protected]
Humoring trades for laptops, ( Mac minis, macbooks, powerbooks especially)
Also would like a Wii/Xbox360/PS3 or a high end paintball gun. (i.e. Ego, Dm6+, Marq, etc...