RandomGuy
08-15-2008, 06:14 PM
I have three things for sale. (All of this for 250$ firm, picked up in gwinnett)
1.) P600 amp
2.) 12" P3 Sub w/Box
3.) Capacitor
Here are the specs off of the website:
ROCKFORD FOSGATE P600 600 Watt Class-1bd Mono Amplifier
Info:
With its super efficient BD class design, the P600.1bd assures maximum bang for
your buck when you want to add some serious slam to your system. This is a
fantastic amplifier choice for a 4-ohm DVC subwoofer or pair of 4-ohm SVC
subwoofers. For best performance a capacitor is recommended.
Description Value
CEA-2006 Compliant
Number of Channels 1
Rated Power 325 W x 1 @ 4 Ohms RMS
600 W x 1 @ 2 Ohms RMS
Total Power 600 Watts
Bridgeable No
Crossover Controls Low-Pass (LP): 35-250Hz 12dB/octave Butterworth
Infrasonic Filter: on/off selectable, 12dB/octave, -3db @ 28 Hz
Tone Controls Bass: 0dB to +18dB @ 45Hz
Signal Input Low level: 1 RCA pair
Signal Output Low level: 1 RCA pair
Power Input Connector Block
Power Wire Gauge 4 AWG
Speaker Output Connector Screw terminal barrier strip
Speaker Wire Gauge 8 AWG to 18 AWG
Heat Sink Type Cast aluminum
Cooling Convection
Remote Controls Punch Bass EQ (included with cable)
Visual Indicators Power On
Signal Level
Thermal Status
Speaker Protection
Circuit Topology Class Class BD
Frequency Response 20Hz to 20kHz +/- 0.5 dB
Dimensions 2.1 x 11 x 13.7 (in)
5.3 x 27.9 x 34.8 (cm)
Weight 13.5 Lbs.
(6.1Kg.)
MSRP: $445
One 12" Rockford Fosgate Punch P3 DVC Subwoofers w/ BOX
Info:
Rockford Fosgate builds Punch Series Stage 3 subwoofers with advanced cooling
technology and bullet-proof cone materials so they'll give you years of
trouble-free bass reinforcement.
Fibre cones deliver some of the truest low tones you'll ever hear, and they're
reinforced with Kevlar to add serious backbone to the rich sound quality. The
extra-tall poly-ether-ester surround extends cone excursion, which translates
into lows that are full and robust. A colossal 102-ounce magnet calls the shots,
keeping cone movement under tight control for high accuracy.
The P3 range of subwoofers features a die-cast aluminium frame, motor cover, and
trim ring, providing excellent heat transfer and reliable toughness. Rockford
Fosgate's "Venturi-effect" design increases airflow through the sub's centre
area for maximum cooling. You get a sub that'll deliver long term performance
and competition-worthy bass.
MSRP $269
BOX MSRP $100
Rockford Fosgate 0.5 Farad - 20 volt Surge Capacitor
CPC05-03
Punch standard 0.5 Farad - 20 volt Surge Capacitor. Ultra low ESR <1.5
milliohms. Delivers improved sound along with reduced headlight dimming. Up to
500 watt systems.
MSRP: $149
this hits REALLY HARD, if you have wires already in your car you can test before you buy.
1.) P600 amp
2.) 12" P3 Sub w/Box
3.) Capacitor
Here are the specs off of the website:
ROCKFORD FOSGATE P600 600 Watt Class-1bd Mono Amplifier
Info:
With its super efficient BD class design, the P600.1bd assures maximum bang for
your buck when you want to add some serious slam to your system. This is a
fantastic amplifier choice for a 4-ohm DVC subwoofer or pair of 4-ohm SVC
subwoofers. For best performance a capacitor is recommended.
Description Value
CEA-2006 Compliant
Number of Channels 1
Rated Power 325 W x 1 @ 4 Ohms RMS
600 W x 1 @ 2 Ohms RMS
Total Power 600 Watts
Bridgeable No
Crossover Controls Low-Pass (LP): 35-250Hz 12dB/octave Butterworth
Infrasonic Filter: on/off selectable, 12dB/octave, -3db @ 28 Hz
Tone Controls Bass: 0dB to +18dB @ 45Hz
Signal Input Low level: 1 RCA pair
Signal Output Low level: 1 RCA pair
Power Input Connector Block
Power Wire Gauge 4 AWG
Speaker Output Connector Screw terminal barrier strip
Speaker Wire Gauge 8 AWG to 18 AWG
Heat Sink Type Cast aluminum
Cooling Convection
Remote Controls Punch Bass EQ (included with cable)
Visual Indicators Power On
Signal Level
Thermal Status
Speaker Protection
Circuit Topology Class Class BD
Frequency Response 20Hz to 20kHz +/- 0.5 dB
Dimensions 2.1 x 11 x 13.7 (in)
5.3 x 27.9 x 34.8 (cm)
Weight 13.5 Lbs.
(6.1Kg.)
MSRP: $445
One 12" Rockford Fosgate Punch P3 DVC Subwoofers w/ BOX
Info:
Rockford Fosgate builds Punch Series Stage 3 subwoofers with advanced cooling
technology and bullet-proof cone materials so they'll give you years of
trouble-free bass reinforcement.
Fibre cones deliver some of the truest low tones you'll ever hear, and they're
reinforced with Kevlar to add serious backbone to the rich sound quality. The
extra-tall poly-ether-ester surround extends cone excursion, which translates
into lows that are full and robust. A colossal 102-ounce magnet calls the shots,
keeping cone movement under tight control for high accuracy.
The P3 range of subwoofers features a die-cast aluminium frame, motor cover, and
trim ring, providing excellent heat transfer and reliable toughness. Rockford
Fosgate's "Venturi-effect" design increases airflow through the sub's centre
area for maximum cooling. You get a sub that'll deliver long term performance
and competition-worthy bass.
MSRP $269
BOX MSRP $100
Rockford Fosgate 0.5 Farad - 20 volt Surge Capacitor
CPC05-03
Punch standard 0.5 Farad - 20 volt Surge Capacitor. Ultra low ESR <1.5
milliohms. Delivers improved sound along with reduced headlight dimming. Up to
500 watt systems.
MSRP: $149
this hits REALLY HARD, if you have wires already in your car you can test before you buy.