View Full Version : Camaro Z28
Motivation
08-13-2008, 05:39 PM
I need to know where the best place to find a Bellhousing, reservoir, slave cylinder, master cylinder, hydraulic line, and clutch pedal would be. The car is an 82 camaro z28. 305 HO. I believe they said an 85-59 (???) would work too. My buddy is changing it to an hydraulic clutch. He has checked year one and various other places. I thought I would ask some of you guys. Thanks for any info given!
Init2winit
08-13-2008, 06:37 PM
I would scope out various junk yards for the hard parts, and your local auto parts store should have the hydraulic stuff. Put an add on www.streetcarforums.com, you will have a better chance in finding that sort of stuff on there.
Motivation
08-13-2008, 06:39 PM
Alright. Well it didn't come with hydraulic parts so I believe he is kinda piecing it together. The parts he needs the dealership said they discontinues, No local part stores have been able to help so far. I will let him know about the other forum though. He has tried z28.com but not much help. Thanks again man. Reps
Motivation
08-13-2008, 10:08 PM
Anyone else? Buddy has had this car for 6 years, hasn't been on road except for maybe 4 days in last year and a half cause of transmission problems... Any body maybe know of someone with the parts?
Slomaro Z28
08-13-2008, 10:17 PM
Vicious on z28.com has a full t56 swap, I think it would bolt up.....for $1600.
I'd try Craigslist if you haven't already. I was poking around for 4th gen interior bits today and noticed a LOT of 3rd gen part outs.
z28.com doesn't get as much traffic as other sites. I would try LS1tech or camaro source, but you might have better luck with LS1tech.
You might have to try broad keywords on craigslist, as I was finding 3rd generation part outs by searching for 1997 z28....:thinking:
Good luck, if I find something I'll let you know.
Slomaro Z28
08-13-2008, 10:20 PM
Found this as I searched google so the t56 swap would work.
Best Answer - Chosen by Voters
The swap is pretty easy.. Both 305 ans 350 (if the 350 is a chevy) are chevy engines, both will bolt up to same mounts, same trans, etc.
Motivation
08-13-2008, 10:28 PM
Vicious on z28.com has a full t56 swap, I think it would bolt up.....for $1600.
Alright, I'll let him know. Don't think he has 1600 to throw down right now though. But if anything he can talk to Vicious. Thanks, reps to you
Motivation
08-13-2008, 10:30 PM
I'd try Craigslist if you haven't already. I was poking around for 4th gen interior bits today and noticed a LOT of 3rd gen part outs.
z28.com doesn't get as much traffic as other sites. I would try LS1tech or camaro source, but you might have better luck with LS1tech.
You might have to try broad keywords on craigslist, as I was finding 3rd generation part outs by searching for 1997 z28....:thinking:
Good luck, if I find something I'll let you know.
thanks bro, I'll check out craigslist. reps
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.