WalkS
08-02-2008, 03:57 PM
Okay guys school is starting soon and i have to pay tuition. So I decided to sell my built ZC engine with trans. This engine has literally less than 5 miles on it. After I built it and installed it into my civic, I took it around the block a couple times. This engine should support up to 400hp and even more If you have the supporting mods(injectors/turbo setup). I've seen guys with similar, yet the same setup make 460hp on stock sleeves.
This engine and trans is being pulled out as we speak. Be ready for a new thread for the part out!
Specs:
JDM ZC engine (same as a D16A6, but JDM Spec)
Vitara Pistons ( est. c/r is 7.5 c/r)
-with new piston rings
Tuner Toys Billet rods with ARP 2000 Rods bolts
KMS Block Guard
Cometic 3 layer metal head gasket
ACL RACE crank and rod bearings
Ported and Polished Head
JG Engine Dynamics Valve Springs and titanium retainers
ALL NEW seals, gaskets throughout the whole engine
ARP Head Studs
GSR Throttle Body
DSM 450cc Injectors
PM6 Chipped & removable ZIF socket with interface kit installed for datalogging. TurboEdit tuned.
Findanza 9 Pound flywheel
XTD Stage 3 clutch pressure plate (needs to be broken in)
JDM S20 trans (no grinds)
I do have the shift linkages and EF Polyurethane filled mounts to go with it.
NOTE: the Hasport hydraulic to cable conversion can go with it for a extra 200 dollars firm.
PRICE:
$2000 obo
CONTACT METHOD:
PM ME, or PM ME for a phone number
Thanks for looking!
beginning to the end
http://i6.photobucket.com/albums/y217/BoostedHonda/Picture116.jpg
tuner toys rods compared to the stock rods( the new vitara pistons installed)
http://i6.photobucket.com/albums/y217/BoostedHonda/046.jpg
Engine assembled
http://i6.photobucket.com/albums/y217/BoostedHonda/049.jpg
http://i6.photobucket.com/albums/y217/BoostedHonda/050.jpg
Head after the ported/clean up (half of the new valve springs were installed)
http://i6.photobucket.com/albums/y217/BoostedHonda/072.jpg
http://i6.photobucket.com/albums/y217/BoostedHonda/014.jpg
http://i6.photobucket.com/albums/y217/BoostedHonda/026.jpg
Engine installed (only pictures i have of the engine after i assembled it)
http://i6.photobucket.com/albums/y217/BoostedHonda/21708027-1.jpg
http://i6.photobucket.com/albums/y217/BoostedHonda/21708028-1.jpg
http://i6.photobucket.com/albums/y217/BoostedHonda/21708047-1.jpg
http://i6.photobucket.com/albums/y217/BoostedHonda/21708033.jpg
This is what the intercooler looks like
http://i6.photobucket.com/albums/y217/BoostedHonda/Picture.jpg
A picture shortly after took the engine out
http://i6.photobucket.com/albums/y217/BoostedHonda/P5170523.jpg
This engine and trans is being pulled out as we speak. Be ready for a new thread for the part out!
Specs:
JDM ZC engine (same as a D16A6, but JDM Spec)
Vitara Pistons ( est. c/r is 7.5 c/r)
-with new piston rings
Tuner Toys Billet rods with ARP 2000 Rods bolts
KMS Block Guard
Cometic 3 layer metal head gasket
ACL RACE crank and rod bearings
Ported and Polished Head
JG Engine Dynamics Valve Springs and titanium retainers
ALL NEW seals, gaskets throughout the whole engine
ARP Head Studs
GSR Throttle Body
DSM 450cc Injectors
PM6 Chipped & removable ZIF socket with interface kit installed for datalogging. TurboEdit tuned.
Findanza 9 Pound flywheel
XTD Stage 3 clutch pressure plate (needs to be broken in)
JDM S20 trans (no grinds)
I do have the shift linkages and EF Polyurethane filled mounts to go with it.
NOTE: the Hasport hydraulic to cable conversion can go with it for a extra 200 dollars firm.
PRICE:
$2000 obo
CONTACT METHOD:
PM ME, or PM ME for a phone number
Thanks for looking!
beginning to the end
http://i6.photobucket.com/albums/y217/BoostedHonda/Picture116.jpg
tuner toys rods compared to the stock rods( the new vitara pistons installed)
http://i6.photobucket.com/albums/y217/BoostedHonda/046.jpg
Engine assembled
http://i6.photobucket.com/albums/y217/BoostedHonda/049.jpg
http://i6.photobucket.com/albums/y217/BoostedHonda/050.jpg
Head after the ported/clean up (half of the new valve springs were installed)
http://i6.photobucket.com/albums/y217/BoostedHonda/072.jpg
http://i6.photobucket.com/albums/y217/BoostedHonda/014.jpg
http://i6.photobucket.com/albums/y217/BoostedHonda/026.jpg
Engine installed (only pictures i have of the engine after i assembled it)
http://i6.photobucket.com/albums/y217/BoostedHonda/21708027-1.jpg
http://i6.photobucket.com/albums/y217/BoostedHonda/21708028-1.jpg
http://i6.photobucket.com/albums/y217/BoostedHonda/21708047-1.jpg
http://i6.photobucket.com/albums/y217/BoostedHonda/21708033.jpg
This is what the intercooler looks like
http://i6.photobucket.com/albums/y217/BoostedHonda/Picture.jpg
A picture shortly after took the engine out
http://i6.photobucket.com/albums/y217/BoostedHonda/P5170523.jpg