FS: BUILT ZC D16 Full swap

[WalkS]

Okay guys school is starting soon and i have to pay tuition. So I decided to sell my built ZC engine with trans. This engine has literally less than 5 miles on it. After I built it and installed it into my civic, I took it around the block a couple times. This engine should support up to 400hp and even more If you have the supporting mods(injectors/turbo setup). I've seen guys with similar, yet the same setup make 460hp on stock sleeves.

This engine and trans is being pulled out as we speak. Be ready for a new thread for the part out!


Specs:

JDM ZC engine (same as a D16A6, but JDM Spec)

Vitara Pistons ( est. c/r is 7.5 c/r)
-with new piston rings

Tuner Toys Billet rods with ARP 2000 Rods bolts

KMS Block Guard

Cometic 3 layer metal head gasket

ACL RACE crank and rod bearings

Ported and Polished Head

JG Engine Dynamics Valve Springs and titanium retainers

ALL NEW seals, gaskets throughout the whole engine

ARP Head Studs

GSR Throttle Body

DSM 450cc Injectors

PM6 Chipped & removable ZIF socket with interface kit installed for datalogging. TurboEdit tuned.

Findanza 9 Pound flywheel

XTD Stage 3 clutch pressure plate (needs to be broken in)

JDM S20 trans (no grinds)

I do have the shift linkages and EF Polyurethane filled mounts to go with it.

NOTE: the Hasport hydraulic to cable conversion can go with it for a extra 200 dollars firm.

PRICE:
$2000 obo

CONTACT METHOD:
PM ME, or PM ME for a phone number

Thanks for looking!

beginning to the end
http://i6.photobucket.com/albums/y217/BoostedHonda/Picture116.jpg

tuner toys rods compared to the stock rods( the new vitara pistons installed)
http://i6.photobucket.com/albums/y217/BoostedHonda/046.jpg

Engine assembled
http://i6.photobucket.com/albums/y217/BoostedHonda/049.jpg
http://i6.photobucket.com/albums/y217/BoostedHonda/050.jpg

Head after the ported/clean up (half of the new valve springs were installed)
http://i6.photobucket.com/albums/y217/BoostedHonda/072.jpg
http://i6.photobucket.com/albums/y217/BoostedHonda/014.jpg

http://i6.photobucket.com/albums/y217/BoostedHonda/026.jpg

Engine installed (only pictures i have of the engine after i assembled it)
http://i6.photobucket.com/albums/y217/BoostedHonda/21708027-1.jpg
http://i6.photobucket.com/albums/y217/BoostedHonda/21708028-1.jpg
http://i6.photobucket.com/albums/y217/BoostedHonda/21708047-1.jpg
http://i6.photobucket.com/albums/y217/BoostedHonda/21708033.jpg

This is what the intercooler looks like
http://i6.photobucket.com/albums/y217/BoostedHonda/Picture.jpg

A picture shortly after took the engine out
http://i6.photobucket.com/albums/y217/BoostedHonda/P5170523.jpg

[FasTech]

Very nice bro, G/L on the sale! Oh I might have a friend interrested, I let you know something by tonight!

[.:Stirfry:.]

i can vouch for my brother on mota..
did my due on some of the build and also
on gettin it running:.

[slostang]

dude that is the ultimate sleeper engine fo sho. wish I had the cash.

[WalkS]

BUMP
I can work with the price a little bit. If you have a b series engine/trans, lmk maybe i will trade. :goodjob:

[WalkS]

TTT!

[WalkS]

bUmp!

[00CelicaGT]

wat kind of #'s did it put down?

[WalkS]

wat kind of #'s did it put down?

I'd never dyno'ed the car. I ran out of money once i finished the build... :[

[WalkS]

Bump! I am pulling the engine out and parting out the engine. PM ME if your interested in any of the engine parts...

[Revmaynard]

Bump! I am pulling the engine out and parting out the engine. PM ME if your interested in any of the engine parts...


Damn this had to come up too early! I'd have the cash for this around December. :( lol

[WalkS]

BUMP. This engine and trans is being pulled out as we speak. Be ready for a new thread for the part out!