Those that know me....

[ATK_Designs]

Out with the Volks, in with the new shoes.


Sneak peek for now, going from 19 to 20, wider and bigger.

Stay tuned:

http://i259.photobucket.com/albums/hh297/atk_designs/ATK-D%20G35C%20Phase%20II/Wheels/5947d48e.jpg

[WhiteAccord]

Nice... HRE?

[OTG Signs]

ok

[Dirty Octopus™]

i love the valve stem! :goodjob:

[ATK_Designs]

Nice... HRE?

not quite HRE. But similar line. :D

[ATK_Designs]

i love the valve stem! :goodjob:

yea man, I need to get it some lube to keep it shine :boobies:

[WhiteAccord]

Nice finish though.

[white_rice]

not bad but i like the 3g better lol

nah jp not bad big ass lip man

[Papa_Smurf]

whats so special about rotas....?



lol

[Sammich]

ab

so

lut

ball

errrrrrrrrrrrrrrrr

[k20siboii]

looks nice man

[ATK_Designs]

Thanks guys.

I'm bored tonight and that GT-R + white wheel thread bring back memories,

so here's another exclusive sneak peek:

http://i259.photobucket.com/albums/hh297/atk_designs/ATK-D%20G35C%20Phase%20II/Wheels/49026dba.jpg



http://i259.photobucket.com/albums/hh297/atk_designs/ATK-D%20G35C%20Phase%20II/Wheels/3e5e43b9.jpg

[sleepys4]

Where you hungry when you ordered those?







Deep Dish FTW!

[NevrNufTorq]

i forged?!?!? maybe, but not sure.... :???: gonna look sweet though! :goodjob: tire choice?

[ATK_Designs]

Where you hungry when you ordered those?

Deep Dish FTW!

Yep I was....The dish isn't really that much, 4.5" visible lip, 5.5" True front lip (1" is covered by the face). I could've get 6" visible lip, but that won't clear the 15" BBK :D

[ATK_Designs]

i forged?!?!? maybe, but not sure.... :???: gonna look sweet though! :goodjob: tire choice?


Not Iforged. ;) Thanks, tires will be Dunlop Sportmaxx. I've had couple others and I like them the best.

[Sammich]

ayo quit the teasing u poon

[DieselNuts]

damn kevin, you keep stepping your game up! They look badass. Cant wait to see them on the G spot. What size tires are you getting?

[merfwin]

put them on already!

[03RCode]

ThreeSixtyForged? Look siick man.

[The BUCKY]

were they not able to do the paint you wanted

[ATK_Designs]

ayo quit the teasing u poon

The car is still on jackstands, so it'd have to be the tease for now. Soon my friend, soon ;)

[ATK_Designs]

damn kevin, you keep stepping your game up! They look badass. Cant wait to see them on the G spot. What size tires are you getting?

thanks bro. I may run 245-35F and 285-30R. These are very aggressive, so I may have to stretch a bit, otherwise, I'd be rubbin like hail...And my fenders are already trimmed and bent flat to the wall.

[ATK_Designs]

put them on already!

Not yet bro, car needs to go back to Sprayglo for some cleanup work before getting these puppies on ;)

[ATK_Designs]

ThreeSixtyForged? Look siick man.

Not quite. I was looking into 360Forged, but the price of this size would be 8K, no tires. Too much money. I'm not there yet.

[ATK_Designs]

were they not able to do the paint you wanted

They can do any paint, but the prices will be a lot more, so I opt for the simple. But I think these would match my new BBK a lot better. :)

I wanted the Anodized Titanium Black like FISKE, but they can't anodize and none of the places in GA I found can do that, so that option is out the door.

[Sammich]

The car is still on jackstands, so it'd have to be the tease for now. Soon my friend, soon ;)

sad face is the activated:(

*waits*

[Random Hero]

thanks bro. I may run 245-35F and 285-35R. These are very aggressive, so I may have to stretch a bit, otherwise, I'd be rubbin like hail...And my fenders are already trimmed and bent flat to the wall.

Wait, so you have a 12" wide rear wheel and you're only going to run that size of tire?

Am I missing something here?

[IP37]

i know what they aaare
still mad you got yours before i got mine :( lol
should have mine next week


Wait, so you have a 12" wide rear wheel and you're only going to run that size of tire?

Am I missing something here?

wheel size is 11"

[DieselNuts]

thanks bro. I may run 245-35F and 285-35R. These are very aggressive, so I may have to stretch a bit, otherwise, I'd be rubbin like hail...And my fenders are already trimmed and bent flat to the wall.
Whats the off set? I had 285/30's on my 10" wheels and though they are the biggest tire I would have gone with, I dont know how they would look with an additional inch on each side. If you can fit it, I would go with a wider tire. At least 295....but if they wont fit, they wont fit...

[Random Hero]

i know what they aaare
still mad you got yours before i got mine :( lol
should have mine next week



wheel size is 11"

Ok, but still, why the small tire? Throw some 295, 305, or 315's on that thing.

Don't give me that 'ish about scrubbin either...

[ATK_Designs]

Derek, actually, I had a typo, 285-30 in the rear. I've seen people stretched other tires, much worse. This is a slight stretch :)

And yes, IP37 clarified it, the spec's width is 11, the actually with rolled off lip is 12". 285-30 would be fine, but no protection of course. I'm living on the edge.

Then again, my moto is: If you're not living on the edge, you're taking up too much space:

And I've been there before with the brake clearance and ultra flush:
http://a53.ac-images.myspacecdn.com/images01/96/l_a3b18d78d78f81284817d648eb3fedec.jpg

[Sammich]

perfectly stretched tires are the hotness...

[Random Hero]

Derek, actually, I had a typo, 285-30 in the rear. I've seen people stretched other tires, much worse. This is a slight stretch :)

And yes, IP37 clarified it, the spec's width is 11, the actually with rolled off lip is 12". 285-30 would be fine, but no protection of course. I'm living on the edge.

Then again, my moto is: If you're not living on the edge, you're taking up too much space:

And I've been there before with the brake clearance and ultra flush:
http://a53.ac-images.myspacecdn.com/images01/96/l_a3b18d78d78f81284817d648eb3fedec.jpg

Dude, I'm not hating by any means, but why are you going for the stretched look?

I'd consider protecting my investment by protecting the lips on those wheels. But, notice the use of "I'd."

LOL @ your comment about living on the edge (not in a good way either).

[ATK_Designs]

^It'd be looking similar to this, would it be that bad for a lil stretch?

FYI - I'm not going for the stretch look. I'd only stretch it slightly for it to fit nicely under the rears. It's a means to achieve the perfect fitment, not because of look.


Btw, my definition of stretch may be different than people. I call this stretch, while others may call it perfect sizing.

http://i243.photobucket.com/albums/ff315/tknqnknv/2007-09-23/IMGP0188.jpg

[DieselNuts]

got any pics of the wheel/tire size combo?

[Random Hero]

Fair enough buddy...it's your ride and it seems like you have your mind made up. :)

I'd personally throw a bigger tire on there, but either way I still think it will look great. :yes:

Best of luck.

[Sammich]

^It'd be looking similar to this, would it be that bad for a lil stretch?

FYI - I'm not going for the stretch look. I'd only stretch it slightly for it to fit nicely under the rears. It's a means to achieve the perfect fitment, not because of look.


Btw, my definition of stretch may be different than people. I call this stretch, while others may call it perfect sizing.

http://i243.photobucket.com/albums/ff315/tknqnknv/2007-09-23/IMGP0188.jpg

o yea...my tire looks the same on my setup:D

yummy:idb:

[IP37]

http://i243.photobucket.com/albums/ff315/tknqnknv/2007-09-23/IMGP0188.jpg

what were the sizes there? i'm going with a 285 on a 10.5" in the rear, and a 245 on a 9" in the front

[ATK_Designs]

^ 275-35 on 19x10.5. :)

[ATK_Designs]

FYI, here how it'd look with that tire size. This is 19x11 with 285-35

http://i220.photobucket.com/albums/dd244/AlvinHuyN/Meisters3.jpg

http://i220.photobucket.com/albums/dd244/AlvinHuyN/Meisters8.jpg


http://i220.photobucket.com/albums/dd244/AlvinHuyN/Meisters9.jpg

[DieselNuts]

thats not bad. Its borderline for me though. That is the ABSOLUTE smallest width I would go.

BTW, whoever that is has 3 tires going in 1 direction and 1 in the other....fail...

[ATK_Designs]

^hahaha, OMG, you're right, I didn't even know he had his 1 tire in wrong direction.

[OTG Signs]

19x11 should have a 335 on it. :D

[rollininstyle2004]

LOL...everyone worrying about stretch. Im pretty sure that EXTRA tire protecting your sidewall going from a 285/30 to say a 305/30 is NOT going to help if you nail anything. Lets be honest, the sidewall height is going to be 6mm larger, and it might not expose the lip of the wheel. If you are rolling around on $5k+ wheels, you are most likely going to be paying attention to the road anyway.

Ill be running 235 on my next 9.5s anyway :tongue1: