PDA

View Full Version : WTB ASAP:Lower Drivers side EG/EJ motor mount.


CHADbee
07-18-2008, 06:37 PM
i need a lower drivers side motor mount for a 92-95 civic with a D series so if anybody has one laying around please let me know.
silversol
07-18-2008, 07:53 PM
the rubber mount? or the one the a/c compressor is bolted to?
IndianStig
07-18-2008, 07:54 PM
don't you work at a place that has like 2432425432 honda's a week?

lol
CHADbee
07-18-2008, 08:00 PM
the rubber mount? or the one the a/c compressor is bolted to?
the rubber round one....i think...i bought my car with no tranny in it and the motor was leaning cause that mount to poo it self
CHADbee
07-18-2008, 08:01 PM
don't you work at a place that has like 2432425432 honda's a week?

lol
yes LOL

our stuff gets stripped and crushed ASAP. we dont keep motor mounts and we dont have a 92-95 civic out on the lot anymore :(
CHADbee
07-18-2008, 08:04 PM
like this....


http://www.autopartswarehouse.com/images/product_images/thumbs200/westar/EM-8435.jpg
silversol
07-18-2008, 11:10 PM
like this....


http://www.autopartswarehouse.com/images/product_images/thumbs200/westar/EM-8435.jpg
those always brake. i am also positive you will not find a good used one. just go to autozone and buy a new one they are cheap..
CHADbee
07-19-2008, 12:02 AM
those always brake. i am also positive you will not find a good used one. just go to autozone and buy a new one they are cheap..
ill check autozone tomorrow...thank you :goodjob:
Apollo
07-19-2008, 11:38 AM
that one will cost you around 49.99 the right side is about 39.99
Initial EG
07-21-2008, 01:21 AM
that mount isn't for holding the motor up

Also a common misconception is when those "webs" break that the mount is trash.. this isn't true, the only purpose of the webbing is to hold the center in place so your motor mount is 1 piece and not 2, makes it easier to install but that's all they're for.

I think I have a few, need to check...
CHADbee
07-21-2008, 08:16 AM
that mount isn't for holding the motor up

Also a common misconception is when those "webs" break that the mount is trash.. this isn't true, the only purpose of the webbing is to hold the center in place so your motor mount is 1 piece and not 2, makes it easier to install but that's all they're for.

I think I have a few, need to check...
i bought one from autozone for 40 bucks :D

thank you anyways though