More Shaving

[Bishop]

Yup, thats what I've been doing today. Shaving the entenna, emblems, and rear key hole. Well here are the pics as it stands. Already welded up the holes and just put filler on them then im going to sand that down.

[Repost Squintz]

wooot shaving!

[MrEG62U]

i hope there is fiber glass under the bondo

[B16a2 Civic]

wanna do my side moldings and stuff....fo peanuts?

Lol, but looks good man

[Bishop]

^LOL the side mouldings were an ass. oh well atleast there wasnt and indention that i would have to make a stip of metal to weld on.

And no there isnt glass underneath the bondo....its just a very thin layer just to fill in littl holes and lines from grinding. It wont crack, dont worry.

[Bishop]

wanna do my side moldings and stuff....fo peanuts?

Lol, but looks good man
Thank you

[flysi00]

lol looks good man get ready to work on the 240 is got into a lil wreck lol

btw BITCHS he knows his stuff with body and paint lol

[Bishop]

^lol thanks man. How bad is this wreck you speak of?

[5thgcelica]

lookin good

and yes..as long as he put glass or welded (in his case) he'll be fine.

[Bishop]

^yup...just for some of you all's info...i have seen glass crack before....This is why i stick to welding. Theres no way its going to crack, lol.

[5thgcelica]

hehe..ohhh welding CAN crack...its just a hell of a lot harder to do. lol...

plus when you are molding a kit..id rather glass anyday. i woudnt even want to think about trying to reshape metal. lol

[HatchMan]

...I've seen this Integra not too long ago near Dallas highway........ very nice.....

[Spyder]

lol looks good man get ready to work on the 240 is got into a lil wreck lol





:rant: :rant: :rant: :rant: :rant:

[Bishop]

hehe..ohhh welding CAN crack...its just a hell of a lot harder to do. lol...

plus when you are molding a kit..id rather glass anyday. i woudnt even want to think about trying to reshape metal. lol
LOL yeah molding def. got to do glass

[Bishop]

...I've seen this Integra not too long ago near Dallas highway........ very nice.....
Is that in lawenceville? Cause that where i bought it about a month ago.

[The Ren]

Dude I may need your assistance on my bumper... :D

[technoteg97]

lol..My bumper was screwed up also, till I bought a used bumper off sum1 who wasnt using theirs.

[Bishop]

Dude I may need your assistance on my bumper... :D
ohhh so now you are going to be nice to me, lol

[The Ren]

im Always nice to you... but seriously.. I may need it painted... GRRRRRRRR...

[Bishop]

^lol alright. Just let me know.

[The Ren]

I will.. Se Romeo is supposed to help me bondo it even this weekend.. how much would you charge me for a bumper... (damn it.. I just spent $150 doing this a month and 1/2 ago)

[technoteg97]

did Hulud go to sleep/pass out?

[Bishop]

I would do it for $100 but my air compressor is broke. Not sure when im going to get it back.

[Bishop]

did Hulud go to sleep/pass out?
Yeah one of those 2. I just got home but i know he drank a bit tonight.

[HatchMan]

Is that in lawenceville? Cause that where i bought it about a month ago.

No no here in Marietta.....

[Bishop]

^lol my bad....i think thats over by the paint shop.

[B16a2 Civic]

hmmm....
wtb: 99-00 civic fender Lol

[Bishop]

LOLOL I'll hook you up man!!

[blacknightteg]

thats so funny i cant believe i almost bought that EXACT car from A&R fuckin foriegn bastard wanted to much for the shit that was wrong with it

[B16a2 Civic]

Lol man...i bet you could sell that thang at nopi tho...oh crap matter of fact i kno someone who might need them, i forgot to totally ask him....io might have a sale for you...whas tha price again?

[Bishop]

haha yeah that place sucks balls. Talked him down to 5500. But i would never go back there and would suggest no one else goes there. We agreed on a price and then i went back to buy it and he acted like we never did. But my dad slapped that little bitch around. FUCK AR MOTORSPORTS

[Bishop]

Lol man...i bet you could sell that thang at nopi tho...oh crap matter of fact i kno someone who might need them, i forgot to totally ask him....io might have a sale for you...whas tha price again?
Hell yes. Thats my boy!....um $50...its brand new still in box.

[speedminded]

How did you do the side moulding exactly? I'll weld the rear quarter and use a filler but I don't want to tack tack tabs for the holes on the door because it will make it wavy and i doubt an adhesive would hold on the inside either.

An ITR skin is a little over $200 from the dealer and about $200-220 labor to put on and paint...I found a complete passenger side ITR door with glass, all electrical, and interior panel for less than a new skin but need the driver's side now...

[Bishop]

Damn....what i did was take the side mouldings off....and there will be little square holes..just weld the hole up....put a tack on the left then right and keep going like that till you fill the hole in...then grind it down and put filler on it

[B16a2 Civic]

that crap sounds and looks harder then it iz....how much would you charge someone ajob like that for?

[speedminded]

Damn....what i did was take the side mouldings off....and there will be little square holes..just weld the hole up....put a tack on the left then right and keep going like that till you fill the hole in...then grind it down and put filler on it...the heat from the tacks and grinding didn't make the sheetmetal wavy?

[Bishop]

since they are tacks they wont make too much heat...and if you switch sides and let the tack cool down before you tak that side again you'll be fine

[Bishop]

that crap sounds and looks harder then it iz....how much would you charge someone ajob like that for?
uhh...around $100 or so...depend on if you have a endention...like some civics i know...cause then you have to make a templet out of metal and weld it on

[speedminded]

since they are tacks they wont make too much heat...and if you switch sides and let the tack cool down before you tak that side again you'll be fineoriginally i wanted to put a thin sheet metal skin on the inside...or even just a 1" strip going all the way across the back of the holes and use some sort of adhesive to attached it, fill the outside and sand smooth. There is no filler anywhere on my car though and don't really wanna put any on...

[speedminded]

uhh...around $100 or so...depend on if you have a endention...like some civics i know...cause then you have to make a templet out of metal and weld it onexactly, i think all civics have the indention...either have to weld in the big strips and fill, glass it all (ugh), or just get the jdm thin side moulding and call it a day.

[Bishop]

^i dunno if i would do that...caue the bondo would be the only thing plugging up the holes...and if you have that on a door....it will crack....you only wanta think layer of bondo on doors or anything u slam

[B16a2 Civic]

exactly, i think all civics have the indention...either have to weld in the big strips and fill, glass it all (ugh), or just get the jdm thin side moulding and call it a day.


well all i kno is i need to do one or the other before i get my paint job...cant quite decide yet

[Bishop]

Welding a whole strip on would def. cost you more than what i said above...i have never done that...but it wouldnt be too much fun

[Jon00]

Welding a whole strip on would def. cost you more than what i said above...i have never done that...but it wouldnt be too much fun

its a bitch lol