PDA

View Full Version : wtt my Precision 50 trim



highspeed
07-16-2008, 06:41 PM
Have a deal on the table.....sorry guys

Catnip
07-16-2008, 11:14 PM
I have a PTE 50 trim on my galant. It was completely rebuilt by PTE in December. I got the turbo from Pat and it was blown so I paid PTE $600 to put a new center section. The turbo pulls great and would be a good upgrade for someone with more mods than me. The turbo might have 2k on it. It was on my old 90 GSX(Cgevan's car) and now on the 888/2000 now. I run 10 psi daily and it is in great shape. I just need a smaller turbo for around town driving because I can't run alot of boost due to not enough fuel mods. I would like a evo3 16g plus cash. I will consider 18g and 20g if they are in good shape, for equal trade. LMK i can meet you and I would have to swap turbos on the spot. If it is a MHI turbo I will need the J pipe also. No.....and I mean no 14b's.....unless you plan on giving me $300 on top. Call me at 706-429-3817

soooo. want my siezed 14b:D
No really, I'm looking to get rid of the wheels and the eibachs/AGXs off the eclipse (going for stock suspension for squatting and 2g chromes). What does this need to be bolted up to my car?

highspeed
07-17-2008, 08:29 AM
soooo. want my siezed 14b:D
No really, I'm looking to get rid of the wheels and the eibachs/AGXs off the eclipse (going for stock suspension for squatting and 2g chromes). What does this need to be bolted up to my car?

that would be awsome but I need 5 lug hubs to do that......sorry

highspeed
07-17-2008, 08:30 AM
bump

92spoolin
07-17-2008, 06:38 PM
I have am evo 3 very little play I'll throw in the j pipe too just need a new hot side on bolt has the cast curse and one of the threads stripped havent had a big issue with it leaking also have an evo 3 02 housing I can put in with it if you want. Do you have pics of the turbo? also my turbo has the stainless steel line. Let me know cars down so I can take it off tomorrow if needed to!!!!

92spoolin
07-17-2008, 06:39 PM
Is it a t3 or tdo4 housing?

92spoolin
07-17-2008, 06:46 PM
Also Is it Internally or externally gated? Because If its externally I can include the whole setup I'm running I have a evo 3 exhaust manifold and a 3" o2 housing with wastegate dump or the evo 3 housing. Then you can put some money on top of it I'll even throw in the 650s because I'll have to go bigger. Just let me know if your interested I can take pictures of everything.

highspeed
07-18-2008, 08:20 AM
The turbo has a dsm flange and internally wastegated. I might be interested in that trade. I already have an aftermarket 3in o2 housing and down pipe. Does your car had balance shaft delete.....because I have a 3an line that Precision said to use if oil pressure is above 80lbs. Send me pix..... what kind of psi do you see daily. I only run 10lbs and i rarely go over 4k rpms....lmk

4DRGSR
07-18-2008, 08:25 AM
I have a less than 100 miles old(installed on 1102/2000 last weekend) Fully ported slowboy evo 3 big 16g with match ported o2 housing, stainless lines. I paid $779 for listed above + bnib evo3 manifold. lmk.

92spoolin
07-18-2008, 10:18 AM
To be honest since I've put it on The car hasn't seen much action when I got it from my buddy it had 2000 in it and I've maybe put 1000 on it tops. I only run 10 Boost controller hasnt worked lately and have been to busy to fix it. I drive conservatively with gas prices the way they are. I'll throw in the 650s if you want because if I go bigger I'm going to want to get a little bigger injectors. Still have the balance shafts but when I'm rebuilding I'm taking them out. I can send you the evo 3 manifold too If your interested!! trying t to make it a fair trade. I'll take it off tonight and take pics for ya. Like I said before I'll throw in the j pipe as well with is like 80 bucks on slowboy I bought it with the sbr front mount kit and I obviously won't need it. I'll try to put pics up asap I have to go to work till about 8 and i've been putting a new engine in a friend wrx so havent had much time.

mocha latte cupcake
07-18-2008, 10:26 AM
i will vouch for this f00! the turbo is in really good condition... its been running low boost since i can't remember when and still pulls extremely hard! bump for zachery mcboosted talon.

92spoolin
07-18-2008, 11:38 AM
aww why thank you jm I can tell its slow at work haha

92spoolin
07-18-2008, 01:10 PM
http://i37.tinypic.com/r89jt2.jpg
http://i36.tinypic.com/351uxdl.jpg

http://i35.tinypic.com/m8jlvl.jpg


http://i33.tinypic.com/xpzrjs.jpg

As you can see in the pictures the back right one is the one I was talking about that is broken off also the front right one is a little stetchy on the threads but I haven't had a problem with it leaking. I'll even throw in the manifold to turbo bolts as well they are the stainless steel kit from slowboy let me know can take it off tonight and have it shipped out monday let me know also I will pay for shipping of both if you want.

highspeed
07-18-2008, 02:10 PM
call me 706-429-3817...........you drive a hard bargain

1badgvr4
07-19-2008, 06:08 AM
Got a deal locked in with the man.Have a 20g waiting on him.

92spoolin
07-19-2008, 10:38 AM
Turbo is boxed up waiting on the pm from you highspeed...

highspeed
07-20-2008, 09:00 PM
bump

1badgvr4
07-20-2008, 10:00 PM
Why bump?

92spoolin
07-20-2008, 10:55 PM
why you bumping am i shipping this stuff out tomorrow for nothing or are we still doing the deal ? im kinda confused ?

highspeed
07-21-2008, 06:34 AM
bumpin.......is like second nature.....not trying to get anymore people to call me so I will take my number off and everything