PDA

View Full Version : Some what Civic Part out



SoLJames95
07-13-2008, 07:34 PM
Most parts are forsale. Let me go ahead and go over part that are not for sale.
Engine/tranny or anything that makes the car run or allows it to shift,fenders,dash,steering wheel not (unless provide one if purchased)
headlights/corners,and door/doorpanels/quater panels and suspension/cluster.
Prices are pretty firm accept wheels/ No trades/Cash only
Now for things that Are For Sale!

Si tail lights-SOLD
Hood-(needs touch up)40
Erebuni full polyerethuane Bodykit/wing:rolleyes: -250
Will Wood big brake kit Everything you need accept lines. 4piston caliber/11inch slotted rotors they were used for about 3500 miles- 300 obo/SOLD(also your rotor/brakes in trade) These will not fit a DX!
17nch Gram Lights-Sold
trunk-40
All gauges are 25 a piece:Boost/Vaccum,Oilpressure,Watertemp,Volts,Vaccum
Triple gauge pod
Corbeau Seats (Faded)-SOLD for both or a piece. with custom eg brackets. NO RIPS or TEARS.
Back seats-40 No rips or tears.
Neuspeed strut bars. upper front, lower front,upper rear, lower rear. each
Momo Steering wheel/NRG Quick release hub.-220(and your steering wheel)
Anything else your interested that I could not think of that I did not list, Just ask or PM.http://i207.photobucket.com/albums/bb182/tylerc1414/DSC00939.jpg
http://i207.photobucket.com/albums/bb182/tylerc1414/Picture473-1.jpg
http://i207.photobucket.com/albums/bb182/tylerc1414/Picture474-1.jpg
http://i207.photobucket.com/albums/bb182/tylerc1414/Picture475-1.jpg
http://i207.photobucket.com/albums/bb182/tylerc1414/bigbrakekit.jpg
http://i207.photobucket.com/albums/bb182/tylerc1414/bigbrake.jpg
These are what they look ike but these are when I first got them. Hard to get a good pic.

junior_tm
07-13-2008, 09:15 PM
good sh!t PM'ed

xlilvi3tx
07-13-2008, 09:29 PM
lol thats alot of gauges gl though

SoLJames95
07-13-2008, 09:32 PM
pms replied.

etank82
07-13-2008, 09:39 PM
PM sent...

JDM-95-Hatch
07-13-2008, 09:45 PM
pm sent

Saung
07-13-2008, 09:47 PM
Bump for my old brake kit.... :goodjob: ...good luck...

SoLJames95
07-13-2008, 10:03 PM
^ ^^I got them from u and I loved every second of stopping on a dime:D

Vteckidd
07-13-2008, 10:07 PM
you said no fenders?

SoLJames95
07-13-2008, 10:14 PM
No fenders sorry Mike. It is going to be my dd. But clean;)
All Pms have been answered again

Vteckidd
07-13-2008, 10:17 PM
ho9w did you get it back? i thought you sold it:?

SoLJames95
07-13-2008, 10:25 PM
^^^^ LOL LOL LOL Bro said part what I said out and I can have it. BAD deal I thought:rolleyes: . J/K He has a GEO now and does not want this but wants some kind of money. I said I help him take parts of instead of taken some of the profit.

drewdawg812
07-13-2008, 10:29 PM
hey geos only temp.

greasemunkey
07-13-2008, 10:35 PM
omg if i didn't just get a 3k dollar ticket(s) I would be all over your seats!

SoLJames95
07-13-2008, 10:38 PM
hey geos only temp.
Yah but you will have the money to get something better!:D
You need to start taking that stuff aprt before I get there next week.
The geos are going for like 5k now due toi gas prices:crazy:

drewdawg812
07-13-2008, 10:41 PM
yeah and i paid 0$ for it. i just gotta do some yard work once a week. yeah i know. im workin a hella lot this week. over forty hours but im gurranteed over 700$ so itll be tough to find time to take stuff off.

khaxnguyen
07-13-2008, 10:45 PM
how much for the driver corbeu seat? im really interested

Goinfasterthanu
07-13-2008, 10:48 PM
Will the stock lines work for the brake kit? If so i am interested....

Andy_013
07-13-2008, 10:52 PM
how much for the Neuspeed upper front and upper rear strut bars?

SoLJames95
07-14-2008, 12:09 AM
Will the stock lines work for the brake kit? If so i am interested....
Yes it will work.

SoLJames95
07-14-2008, 12:12 AM
All prices are listed above in detail. 2 seats 300 one seat is 150. Thestrut bars are 30 bucks apiece you want two of the that will be 60 bucks. lemme know.

Goinfasterthanu
07-14-2008, 09:48 AM
So EVERYTHING i need to install and use them is there? If so call me at 404-579-5745...Jeremy

Goinfasterthanu
07-14-2008, 09:53 AM
Also do they use stock pads or other ones?

SoLJames95
07-14-2008, 10:22 AM
^^^not stock pads, u can get them off wilwood or ebay, i have heard they are like sti or evo pads. not sure if those will, and i tried calling you. left a message. the part number is on there website under integra and si civic. 262mm

Andy_013
07-14-2008, 03:28 PM
can you pm me some pics of the strut bars?

Turbodude06
07-14-2008, 05:37 PM
PM if you'll sell your wideband.....

SoLJames95
07-14-2008, 05:50 PM
I have it for sale in another thread. But you are third in line if the first two dont pick up.

Turbodude06
07-15-2008, 08:04 AM
ok just let me know.... BUMP!!!!!

Goinfasterthanu
07-15-2008, 10:43 AM
cant wait for those brakes!!! bump whoo hoo

headpants
07-15-2008, 01:01 PM
cant wait to get those seats tomarrow!!! bump whoo hoo

SoLJames95
07-15-2008, 01:02 PM
Thanks for the bumps. lol, You guys need to find some one to buy these rims.:goodjob:

99jdmLs
07-15-2008, 01:55 PM
well if the rims were 15 or 16s, lol....to bad. and did u bring the car down here or is it still up in atl?

SoLJames95
07-15-2008, 08:35 PM
ATL

SoLJames95
07-16-2008, 10:07 AM
ttt

p3tey2
07-17-2008, 09:45 PM
how much for the pod?

eYezs1ck
07-17-2008, 11:44 PM
damn i wanted those seats

Goinfasterthanu
07-18-2008, 08:17 AM
when can i get the brakes? No rush... just wondering

SoLJames95
07-18-2008, 10:10 AM
^^Im taking them off today.;) Well let you know. Should be 2marrow.

Goinfasterthanu
07-18-2008, 10:20 AM
sweet......