PDA

View Full Version : HELP!! 94 integra ls ignition Timing


swolejamaica
07-10-2008, 05:42 AM
This is my first time attempting to get the timing right. I just put a new distributor and its off timing cause the car tries to start but it kinda of coughs when trys. please any help info will be appreciated.
Vteckidd
07-10-2008, 06:46 AM
put it in the middle. The car should start easily though. Check you firing order
Tech5
07-10-2008, 10:51 AM
You can install the Dizzy 1 way an it can move 1/4 turn both ways an will start in any of those ways...you got the ignition firing order off....Its 1-3-4-2
This is my first time attempting to get the timing right. I just put a new distributor and its off timing cause the car tries to start but it kinda of coughs when trys. please any help info will be appreciated.
Motivation
07-10-2008, 10:57 AM
Could it be 180 off?
Tech5
07-10-2008, 10:59 AM
NO because the Dizzy will only go in one way SO No...Firing order is OFF
Could it be 180 off?
Barefoot
07-10-2008, 12:54 PM
NO because the Dizzy will only go in one way SO No...Firing order is OFFbelieve or not it will go in the wrong way. on problems is the second u spin the motor over its going to break the dizzy. now dont get me wrong its not easy to get it the wrong way but ive seen it done.
Vteckidd
07-10-2008, 12:56 PM
you know ive heard people say it goes in "wrong" but ive never been able to do it.

It either slides in or it doesnt. I mean i supposed if you FORCED it in and ran the bolts down, but ive never gotten it to slide in wrong.

Usually it bottoms out an wont slide onto the cam.
Tech5
07-10-2008, 12:59 PM
Correct...if someone forces it an bolt it down they have to be a complete TARD to do that!
you know ive heard people say it goes in "wrong" but ive never been able to do it.

It either slides in or it doesnt. I mean i supposed if you FORCED it in and ran the bolts down, but ive never gotten it to slide in wrong.

Usually it bottoms out an wont slide onto the cam.
silversol
07-10-2008, 01:53 PM
Correct...if someone forces it an bolt it down they have to be a complete TARD to do that!
i would not put it past some people. lol
Tech5
07-10-2008, 02:09 PM
lololol..True:thinking:
swolejamaica
07-10-2008, 07:14 PM
yea just got home and im going to give that a try!! update soon
Tech5
07-14-2008, 05:20 PM
welll
CHOPPEDTEGRA
07-24-2008, 10:13 AM
GOT IT!!!!