B16 flywheel

[sakasaku]

i am going to get my b16 flywheel resurfaced and how much should i have it lightend if at all it is going in a b18b ls all motor setup?

thanx
:D

[all-mota]

if i remember right the b16 flywheels weighs around 18lb's so if they can lighten it to around 12 it should be plenty

[mitch lab]

had a stock flywheel lighten before..the lowest they went was 14 pound. That's just one place i went to.

[khaxnguyen]

you shouldnt go past 13lbs, its already gonna loose alot of its structural mass and will run a high chance of exploding

[mitch lab]

don't know about exploding, maybe cracking and breaking

[bRiAnMcIvIcS]

Just get an ITR Flywheel(15lbs).:goodjob:

[xbn83]

What is the cost of resurface+lighten compare to buying a new one? If it is not too much of a difference, I would get a new one to save the headache. Fidanza is good, and not that much. I have used them before, and no problem. But if you can spare more money, then it is better to get a 1 piece design flywheel like ACT Pro Lite or Street Lite. BTW, you won't feel any difference if you run ITR flywheel. It is not worth the money and time. I'm speaking from experience.

[Lusos]

I would just go with a Spec/Fidanza flywheel. the thought of the stock flywheel cracking or soming apart under high torque (about 3ft. lbs. for these cars, lol) really dosen't seem cool to me.

[sakasaku]

What is the cost of resurface+lighten compare to buying a new one? If it is not too much of a difference, I would get a new one to save the headache. Fidanza is good, and not that much. I have used them before, and no problem. But if you can spare more money, then it is better to get a 1 piece design flywheel like ACT Pro Lite or Street Lite. BTW, you won't feel any difference if you run ITR flywheel. It is not worth the money and time. I'm speaking from experience.


thuis was feee and it going to cost me 35 dollars to get it resurfaced:D

[bRiAnMcIvIcS]

I've heard the exedy flywheels(9.5lbs) are nice.

[masonhenson]

where do you get one lightened?

[bRiAnMcIvIcS]

where do you get one lightened?

At a machine shop.