PDA

View Full Version : IACV or Fuel Pressure Connector?


G.C
07-01-2008, 03:12 PM
Edit: Can someone tell me what that sensor is called thats in my hand? and how to wire it to the Wiring Harness or to the Ecu? thanks. I'm missing the connector from the Wiring Harness.

Sensor that is Connected to the Fuel Pressure Regulator by a Vacuum hose.
http://i85.photobucket.com/albums/k62/kentooo/IMG_3761.jpg
TEG90
07-02-2008, 12:03 AM
it dont have a plug ? obd 1 or 2?
1SOL2NV
07-02-2008, 12:08 AM
its a vacumm sensor .. ... jus screw it to the back of the manifold and clip the sensor in .... i think its a IAT sensor ... could be wrong but i know i had a bunch of these break on me . on a OBD1 car these jus have a philips screw and is screwed to the back of the manifold and runs to the charcoal canister via a vacuum (sp) line .
Barefoot
07-02-2008, 12:40 AM
its a vacumm sensor .. ... jus screw it to the back of the manifold and clip the sensor in .... i think its a IAT sensor ... could be wrong but i know i had a bunch of these break on me . on a OBD1 car these jus have a philips screw and is screwed to the back of the manifold and runs to the charcoal canister via a vacuum (sp) line .:goodjob::goodjob::goodjob:
im not 100% on its name or function. id say out of the last 100 honda and acuras with them ive worked on about 80% was broke.
1SOL2NV
07-02-2008, 01:06 AM
^ i dunno either thats how i met all the augusta Solers was this sensor ... lol long story but these break ALL the time so be careful . i think the name is a IAT ... which i could be wrong .
G.C
07-02-2008, 09:48 AM
i'm missing the connector from the wiring harness. i want to know how to wire it up. and dam they break that much?
TEG90
07-02-2008, 10:55 AM
it doesnt even have the wires fo it? :thinking:
G.C
07-02-2008, 11:18 AM
nope its missing. theres 2 wire comming out from the plug. black and white. do i ground the black and wire the white to the ecu?
TEG90
07-02-2008, 12:03 PM
not sore i know sometimes white is ground and there are blu for power.
TEG90
07-02-2008, 12:04 PM
what kinda car? b16 motor?
seanrg1116
07-02-2008, 01:01 PM
no it not the IAT. I think it goes to the charchol canister right
G.C
07-02-2008, 01:26 PM
Jdm h22. i got the sensor off jdm h22 wiring harness. i think the color might be diff than Usdm wiring harness.
G.C
07-02-2008, 01:28 PM
i already know where it goes. to d15 on Ecu. traced the wire to the Engine Wiring Harness and it was cut. The color of wire is red/yellow. I cut the Sensor off the Jdm h22a Wiring Harness and the color was White/yellow + black ylow. . just wondering if the white or the balck goes to the wire and which goes to ground.
TEG90
07-02-2008, 11:30 PM
not sure man, normally i would say black, but some stuff i had white was ground.