PDA

View Full Version : *.o* Sway Bar Hardware Kit '\_*o.*_/¯


Dirty Octopus™
07-01-2008, 11:27 AM
Does anybody know where a brotha can get one? :thinking:

ive had this GSR sway bar for over 2 years and i've yet to put it on cuz i never had any bolts to mount dat b¡tch up.

is there somewhere i can get all the necessarry parts to mount it with?
or does anyone at least know the EXACT bolts needed so i can go to Autozone or ACE and get em? :dunno:
seanrg1116
07-01-2008, 11:35 AM
Hpc man they got everything u need cheap, oh and the parts list u need is here



http://www.d-series.org/forums/showthread.php?t=69263
1SOL2NV
07-01-2008, 03:05 PM
wow . DO doesnt know the bolts he needs ??? lol jk g/l
Dirty Octopus™
07-01-2008, 03:15 PM
wow . DO doesnt know the bolts he needs ??? lol jk g/l
naw man.

too lazy to figure this one out. :D
id rather buy and install. that way i dont have to get down and go under the car more than once :lmfao:
khaxnguyen
07-01-2008, 10:54 PM
depends, front or back? its ALOT easier if you have the C braces that go over the bushings and bolt to the frame. 1SiccEJ2 has all GSR suspension and he first used some homedepot universal C braces... it looked funny so he went and bought some OEM ones and using class 10.9 m8-1.25 nuts/bolts and class 8.8 washers. the front subframe already have a nut preweled on, so it bolts right up with the right C brace, but on his car the REAR subframe didnt have nuts prewelded to the subframe, so he had to hold a nut with a wrench inside the subframe while he put the bolt and washer through the other end. im not sure if this is really descriptive but its the best i can think of at the moment, if you need pics i can take some tomorrow morning
Dirty Octopus™
07-01-2008, 10:58 PM
or the rear. i have everything but bolts.
umm... pics would be cool.
though i think my subframe may be prethreaded. i'll check tomorrow :goodjob:
1SOL2NV
07-02-2008, 12:05 AM
DO is your sol a SI ? if so then yes it should be prethreaded for you ..... and if its a S model then it may not be prethreaded ... let me know would be some nice info .
khaxnguyen
07-02-2008, 08:01 AM
koo i got some pics now lol

basically you line everything up and put a bolt and washer through, and hold a nut on the other end of the subframe with a wrench or something till it catches then tighten snug. once you get both bolts in for the bracket, tighten.. then your good.

http://i21.photobucket.com/albums/b297/laoboisosilly/CIMG0259.jpg

the bolts on the inside of the bracket bolt to the subframe. now if you dont have this bracket it wont work right.

http://i21.photobucket.com/albums/b297/laoboisosilly/CIMG0258-1.jpg

http://i21.photobucket.com/albums/b297/laoboisosilly/CIMG0260.jpg

http://i21.photobucket.com/albums/b297/laoboisosilly/CIMG0257.jpg

if you still need more help lmk